From: Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx> Add devicetree binding documentation for Analog Devices MAX313XX RTCs. This combines the new models with the existing max31335 binding. Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@xxxxxxxxxx> Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@xxxxxxxxxx> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> --- .../devicetree/bindings/rtc/adi,max31335.yaml | 88 ++++++++++++++++--- 1 file changed, 78 insertions(+), 10 deletions(-) diff --git a/Documentation/devicetree/bindings/rtc/adi,max31335.yaml b/Documentation/devicetree/bindings/rtc/adi,max31335.yaml index 0125cf6727cc..ad8d6fec9a2b 100644 --- a/Documentation/devicetree/bindings/rtc/adi,max31335.yaml +++ b/Documentation/devicetree/bindings/rtc/adi,max31335.yaml @@ -1,36 +1,54 @@ # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +# Copyright 2022 Analog Devices Inc. %YAML 1.2 --- $id: http://devicetree.org/schemas/rtc/adi,max31335.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Analog Devices MAX31335 RTC +title: Analog Devices MAX313XX series I2C RTCs maintainers: - Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx> + - Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> -description: - Analog Devices MAX31335 I2C RTC ±2ppm Automotive Real-Time Clock with - Integrated MEMS Resonator. - -allOf: - - $ref: rtc.yaml# +description: Analog Devices MAX313XX series I2C RTCs. properties: compatible: - const: adi,max31335 + enum: + - adi,max31328 + - adi,max31329 + - adi,max31331 + - adi,max31334 + - adi,max31335 + - adi,max31341 + - adi,max31342 + - adi,max31343 reg: - maxItems: 1 + description: I2C address of the RTC + items: + - enum: [0x68, 0x69] interrupts: + description: + Alarm1 interrupt line of the RTC. Some of the RTCs have two interrupt + lines and alarm1 interrupt muxing depends on the clockin/clockout + configuration. maxItems: 1 "#clock-cells": description: - RTC can be used as a clock source through its clock output pin. + RTC can be used as a clock source through its clock output pin when + supplied. const: 0 + clocks: + description: + RTC uses this clock for clock input when supplied. Clock has to provide + one of these four frequencies - 1Hz, 50Hz, 60Hz or 32.768kHz. + maxItems: 1 + adi,tc-diode: description: Select the diode configuration for the trickle charger. @@ -48,6 +66,56 @@ required: - compatible - reg +allOf: + - $ref: rtc.yaml# + - if: + properties: + compatible: + contains: + enum: + - adi,max31328 + - adi,max31342 + + then: + properties: + aux-voltage-chargeable: false + trickle-resistor-ohms: false + + - if: + properties: + compatible: + contains: + enum: + - adi,max31328 + - adi,max31331 + - adi,max31334 + - adi,max31335 + - adi,max31343 + + then: + properties: + clocks: false + + - if: + properties: + compatible: + contains: + enum: + - adi,max31341 + - adi,max31342 + + then: + properties: + reg: + items: + - const: 0x69 + + else: + properties: + reg: + items: + - const: 0x68 + unevaluatedProperties: false examples: -- 2.43.2
