The return path can be improved by returning upon first failure. The current implementation would try to register the second interrupt even if the first one failed, which is unnecessary. Moreover, if no irqs are available, the return value should be zero (the driver supports the use case with no interrupts). Currently the initial value is unassigned and that may lead to returning an unknown value if stack variables are not automatically set to zero and no irqs were provided. Reported-by: Dan Carpenter <dan.carpenter@xxxxxxxxxx> Closes: https://lore.kernel.org/linux-hwmon/294e4634-89d4-415e-a723-b208d8770d7c@xxxxxxxxx/T/#t Signed-off-by: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx> --- drivers/hwmon/chipcap2.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/hwmon/chipcap2.c b/drivers/hwmon/chipcap2.c index 3b604fc5d8ae..6ccceae21f70 100644 --- a/drivers/hwmon/chipcap2.c +++ b/drivers/hwmon/chipcap2.c @@ -670,7 +670,7 @@ static int cc2_request_ready_irq(struct cc2_data *data, struct device *dev) static int cc2_request_alarm_irqs(struct cc2_data *data, struct device *dev) { - int ret; + int ret = 0; data->irq_low = fwnode_irq_get_byname(dev_fwnode(dev), "low"); if (data->irq_low > 0) { @@ -679,8 +679,10 @@ static int cc2_request_alarm_irqs(struct cc2_data *data, struct device *dev) IRQF_ONESHOT | IRQF_TRIGGER_RISING, dev_name(dev), data); - if (!ret) - data->rh_alarm.low_alarm_visible = true; + if (ret) + return ret; + + data->rh_alarm.low_alarm_visible = true; } data->irq_high = fwnode_irq_get_byname(dev_fwnode(dev), "high"); @@ -690,8 +692,10 @@ static int cc2_request_alarm_irqs(struct cc2_data *data, struct device *dev) IRQF_ONESHOT | IRQF_TRIGGER_RISING, dev_name(dev), data); - if (!ret) - data->rh_alarm.high_alarm_visible = true; + if (ret) + return ret; + + data->rh_alarm.high_alarm_visible = true; } return ret; -- 2.40.1
