Am Wed, Jan 31, 2024 at 04:17:06PM +0100 schrieb Andrew Lunn:
> > +static int mv88q2xxx_hwmon_probe(struct phy_device *phydev)
> > +{
> > + struct device *dev = &phydev->mdio.dev;
> > + struct device *hwmon;
> > + char *hwmon_name;
> > + int ret;
> > +
> > + /* Enable temperature sensor interrupt */
> > + ret = phy_set_bits_mmd(phydev, MDIO_MMD_PCS,
> > + MDIO_MMD_PCS_MV_TEMP_SENSOR1,
> > + MDIO_MMD_PCS_MV_TEMP_SENSOR1_INT_EN);
>
> You enable an interrupt, but i don't see any changes to the interrupt
> handler to handle any interrupts which are generated?
>
Hi Andrew,
you are right. Have to remove these lines. Besides enabling the interrupt
in MDIO_MMD_PCS_MV_TEMP_SENSOR1, there are two further register writes
necessary to make the interrupt propagate. I didn't want it to propagate.
Anyway it's wrong. I couldn't find a good solution to use the temperature
interrupt. Will have a look into this, and probably figuring out how to
do so. But it won't be part of this patch series.
Dimitri
