This driver enables hardware monitoring support for NZXT Kraken
X53/X63/X73 and Z53/Z63/Z73 all-in-one CPU liquid coolers.
All models expose liquid temperature and pump speed (in RPM), as well as
PWM control (natively only through a temp-PWM curve, but the driver also
emulates fixed PWM control on top of that). The Z-series models
additionally expose the speed and duty of an optionally connected fan,
with the same PWM control capabilities.
Pump and fan duty control mode can be set through pwm[1-2]_enable,
where 1 is for the manual control mode and 2 is for the liquid temp
to PWM curve mode. Writing a 0 disables control of the channel through
the driver after setting its duty to 100%. As it is not possible to query
the device for the active mode, the driver keeps track of it.
The temperature of the curves relates to the fixed [20-59] C range, per
device limitations, and correlating to the detected liquid temperature.
Only PWM values (ranging from 0-255) can be set.
The addressable RGB LEDs and LCD screen, included only on Z-series models,
are not supported in this driver.
Co-developed-by: Jonas Malaco <jonas@xxxxxxxxxxxx>
Signed-off-by: Jonas Malaco <jonas@xxxxxxxxxxxx>
Co-developed-by: Yury Zhuravlev <stalkerg@xxxxxxxxx>
Signed-off-by: Yury Zhuravlev <stalkerg@xxxxxxxxx>
Signed-off-by: Aleksa Savic <savicaleksa83@xxxxxxxxx>
---
Documentation/hwmon/index.rst | 1 +
Documentation/hwmon/nzxt-kraken3.rst | 74 ++
MAINTAINERS | 8 +
drivers/hwmon/Kconfig | 10 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/nzxt-kraken3.c | 1008 ++++++++++++++++++++++++++
6 files changed, 1102 insertions(+)
create mode 100644 Documentation/hwmon/nzxt-kraken3.rst
create mode 100644 drivers/hwmon/nzxt-kraken3.c
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index c7ed1f73ac06..7b3bc243b115 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -171,6 +171,7 @@ Hardware Monitoring Kernel Drivers
nsa320
ntc_thermistor
nzxt-kraken2
+ nzxt-kraken3
nzxt-smart2
occ
oxp-sensors
diff --git a/Documentation/hwmon/nzxt-kraken3.rst b/Documentation/hwmon/nzxt-kraken3.rst
new file mode 100644
index 000000000000..90fd9dec15ff
--- /dev/null
+++ b/Documentation/hwmon/nzxt-kraken3.rst
@@ -0,0 +1,74 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver nzxt-kraken3
+==========================
+
+Supported devices:
+
+* NZXT Kraken X53
+* NZXT Kraken X63
+* NZXT Kraken X73
+* NZXT Kraken Z53
+* NZXT Kraken Z63
+* NZXT Kraken Z73
+
+Author: Jonas Malaco, Aleksa Savic
+
+Description
+-----------
+
+This driver enables hardware monitoring support for NZXT Kraken X53/X63/X73 and
+Z53/Z63/Z73 all-in-one CPU liquid coolers. All models expose liquid temperature
+and pump speed (in RPM), as well as PWM control (either as a fixed value
+or through a temp-PWM curve). The Z-series models additionally expose the speed
+and duty of an optionally connected fan, with the same PWM control capabilities.
+
+Pump and fan duty control mode can be set through pwm[1-2]_enable, where 1 is
+for the manual control mode and 2 is for the liquid temp to PWM curve mode.
+Writing a 0 disables control of the channel through the driver after setting its
+duty to 100%.
+
+The temperature of the curves relates to the fixed [20-59] range, correlating to
+the detected liquid temperature. Only PWM values (ranging from 0-255) can be set.
+If in curve mode, setting point values should be done in moderation - the devices
+require complete curves to be sent for each change; they can lock up or discard
+the changes if they are too numerous at once. Suggestion is to set them while
+in an another mode, and then apply them by switching to curve.
+
+The devices can report if they are faulty. The driver supports that situation
+and will issue a warning. This can also happen when the USB cable is connected,
+but SATA power is not.
+
+The addressable RGB LEDs and LCD screen (only on Z-series models) are not
+supported in this driver, but can be controlled through existing userspace tools,
+such as `liquidctl`_.
+
+.. _liquidctl: https://github.com/liquidctl/liquidctl
+
+Usage Notes
+-----------
+
+As these are USB HIDs, the driver can be loaded automatically by the kernel and
+supports hot swapping.
+
+Possible pwm_enable values are:
+
+====== ==========================================================================
+0 Set fan to 100%
+1 Direct PWM mode (applies value in corresponding PWM entry)
+2 Curve control mode (applies the temp-PWM duty curve based on coolant temp)
+====== ==========================================================================
+
+Sysfs entries
+-------------
+
+============================== ================================================================
+fan1_input Pump speed (in rpm)
+fan2_input Fan speed (in rpm)
+temp1_input Coolant temperature (in millidegrees Celsius)
+pwm1 Pump duty (value between 0-255)
+pwm1_enable Pump duty control mode (0: disabled, 1: manual, 2: curve)
+pwm2 Fan duty (value between 0-255)
+pwm2_enable Fan duty control mode (0: disabled, 1: manual, 2: curve)
+temp[1-2]_auto_point[1-40]_pwm Temp-PWM duty curves (for pump and fan), related to coolant temp
+============================== ================================================================
diff --git a/MAINTAINERS b/MAINTAINERS
index 5e7239cb40ea..f5e66daebf1e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15811,6 +15811,14 @@ S: Maintained
F: Documentation/hwmon/nzxt-kraken2.rst
F: drivers/hwmon/nzxt-kraken2.c
+NZXT-KRAKEN3 HARDWARE MONITORING DRIVER
+M: Jonas Malaco <jonas@xxxxxxxxxxxx>
+M: Aleksa Savic <savicaleksa83@xxxxxxxxx>
+L: linux-hwmon@xxxxxxxxxxxxxxx
+S: Maintained
+F: Documentation/hwmon/nzxt-kraken3.rst
+F: drivers/hwmon/nzxt-kraken3.c
+
NZXT-SMART2 HARDWARE MONITORING DRIVER
M: Aleksandr Mezin <mezin.alexander@xxxxxxxxx>
L: linux-hwmon@xxxxxxxxxxxxxxx
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index a608264da87d..10b8f219fac6 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1674,6 +1674,16 @@ config SENSORS_NZXT_KRAKEN2
This driver can also be built as a module. If so, the module
will be called nzxt-kraken2.
+config SENSORS_NZXT_KRAKEN3
+ tristate "NZXT Kraken X53/X63/X73, Z53/Z63/Z73 coolers"
+ depends on USB_HID
+ help
+ If you say yes here you get support for hardware monitoring for the
+ NZXT Kraken X53/X63/X73, Z53/Z63/Z73 all-in-one CPU liquid coolers.
+
+ This driver can also be built as a module. If so, the module
+ will be called nzxt-kraken3.
+
config SENSORS_NZXT_SMART2
tristate "NZXT RGB & Fan Controller/Smart Device v2"
depends on USB_HID
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 47be39af5c03..5ffeb0ad7fbb 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -173,6 +173,7 @@ obj-$(CONFIG_SENSORS_NPCM7XX) += npcm750-pwm-fan.o
obj-$(CONFIG_SENSORS_NSA320) += nsa320-hwmon.o
obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o
obj-$(CONFIG_SENSORS_NZXT_KRAKEN2) += nzxt-kraken2.o
+obj-$(CONFIG_SENSORS_NZXT_KRAKEN3) += nzxt-kraken3.o
obj-$(CONFIG_SENSORS_NZXT_SMART2) += nzxt-smart2.o
obj-$(CONFIG_SENSORS_OXP) += oxp-sensors.o
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
diff --git a/drivers/hwmon/nzxt-kraken3.c b/drivers/hwmon/nzxt-kraken3.c
new file mode 100644
index 000000000000..5806a3f32bcb
--- /dev/null
+++ b/drivers/hwmon/nzxt-kraken3.c
@@ -0,0 +1,1008 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * hwmon driver for NZXT Kraken X53/X63/X73 and Z53/Z63/Z73 all in one coolers.
+ * X53 and Z53 in code refer to all models in their respective series (shortened
+ * for brevity).
+ *
+ * Copyright 2021 Jonas Malaco <jonas@xxxxxxxxxxxx>
+ * Copyright 2022 Aleksa Savic <savicaleksa83@xxxxxxxxx>
+ */
+
+#include <linux/debugfs.h>
+#include <linux/hid.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <asm/unaligned.h>
+
+#define USB_VENDOR_ID_NZXT 0x1e71
+#define USB_PRODUCT_ID_X53 0x2007
+#define USB_PRODUCT_ID_X53_SECOND 0x2014
+#define USB_PRODUCT_ID_Z53 0x3008
+
+enum kinds { X53, Z53 } __packed;
+enum pwm_enable { off, manual, curve } __packed;
+
+static const char *const kraken3_device_names[] = {
+ [X53] = "x53",
+ [Z53] = "z53",
+};
+
+#define DRIVER_NAME "nzxt_kraken3"
+#define STATUS_REPORT_ID 0x75
+#define FIRMWARE_REPORT_ID 0x11
+#define STATUS_VALIDITY 2000 /* In ms, equivalent to period of four status reports */
+#define CUSTOM_CURVE_POINTS 40 /* For temps from 20C to 59C (critical temp) */
+#define PUMP_DUTY_MIN 20 /* In percent */
+
+/* Sensor report offsets for Kraken X53 and Z53 */
+#define TEMP_SENSOR_START_OFFSET 15
+#define TEMP_SENSOR_END_OFFSET 16
+#define PUMP_SPEED_OFFSET 17
+#define PUMP_DUTY_OFFSET 19
+
+/* Firmware version report offset for Kraken X53 and Z53 */
+#define FIRMWARE_VERSION_OFFSET 17
+
+/* Sensor report offsets for Kraken Z53 */
+#define Z53_FAN_SPEED_OFFSET 23
+#define Z53_FAN_DUTY_OFFSET 25
+
+/* Report offsets for control commands for Kraken X53 and Z53 */
+#define SET_DUTY_ID_OFFSET 1
+
+/* Control commands and their lengths for Kraken X53 and Z53 */
+
+/* Last byte sets the report interval at 0.5s */
+static const u8 set_interval_cmd[] = { 0x70, 0x02, 0x01, 0xB8, 1 };
+static const u8 finish_init_cmd[] = { 0x70, 0x01 };
+static const u8 __maybe_unused get_fw_version_cmd[] = { 0x10, 0x01 };
+static const u8 set_pump_duty_cmd_header[] = { 0x72, 0x00, 0x00, 0x00 };
+static const u8 z53_get_status_cmd[] = { 0x74, 0x01 };
+
+#define SET_INTERVAL_CMD_LENGTH 5
+#define FINISH_INIT_CMD_LENGTH 2
+#define GET_FW_VERSION_CMD_LENGTH 2
+#define MAX_REPORT_LENGTH 64
+#define MIN_REPORT_LENGTH 20
+#define SET_CURVE_DUTY_CMD_HEADER_LENGTH 4
+/* 4 byte header and 40 duty offsets */
+#define SET_CURVE_DUTY_CMD_LENGTH (4 + 40)
+#define Z53_GET_STATUS_CMD_LENGTH 2
+
+static const char *const kraken3_temp_label[] = {
+ "Coolant temp",
+};
+
+static const char *const kraken3_fan_label[] = {
+ "Pump speed",
+ "Fan speed"
+};
+
+struct kraken3_channel_info {
+ enum pwm_enable mode;
+
+ /* Both values are PWM */
+ u16 reported_duty;
+ u16 fixed_duty; /* Manually set fixed duty */
+
+ u8 pwm_points[CUSTOM_CURVE_POINTS];
+};
+
+struct kraken3_data {
+ struct hid_device *hdev;
+ struct device *hwmon_dev;
+ struct dentry *debugfs;
+ struct mutex buffer_lock; /* For locking access to buffer */
+ struct mutex z53_status_request_lock;
+ struct completion fw_version_processed;
+ /*
+ * For X53 devices, tracks whether an initial (one) sensor report was received to
+ * make fancontrol not bail outright. For Z53 devices, whether a status report
+ * was processed after requesting one.
+ */
+ struct completion status_report_processed;
+ /* For locking the above completion */
+ spinlock_t status_completion_lock;
+
+ u8 *buffer;
+ struct kraken3_channel_info channel_info[2]; /* Pump and fan */
+ bool is_device_faulty;
+
+ /* Sensor values */
+ s32 temp_input[1];
+ u16 fan_input[2];
+
+ enum kinds kind;
+ u8 firmware_version[3];
+
+ unsigned long updated; /* jiffies */
+};
+
+static umode_t kraken3_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr,
+ int channel)
+{
+ const struct kraken3_data *priv = data;
+
+ switch (type) {
+ case hwmon_temp:
+ if (channel < 1)
+ return 0444;
+ break;
+ case hwmon_fan:
+ switch (priv->kind) {
+ case X53:
+ /* Just the pump */
+ if (channel < 1)
+ return 0444;
+ break;
+ case Z53:
+ /* Pump and fan */
+ if (channel < 2)
+ return 0444;
+ break;
+ default:
+ break;
+ }
+ break;
+ case hwmon_pwm:
+ switch (attr) {
+ case hwmon_pwm_enable:
+ case hwmon_pwm_input:
+ switch (priv->kind) {
+ case X53:
+ /* Just the pump */
+ if (channel < 1)
+ return 0644;
+ break;
+ case Z53:
+ /* Pump and fan */
+ if (channel < 2)
+ return 0644;
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * Writes the command to the device with the rest of the report (up to 64 bytes) filled
+ * with zeroes.
+ */
+static int kraken3_write_expanded(struct kraken3_data *priv, const u8 *cmd, int cmd_length)
+{
+ int ret;
+
+ mutex_lock(&priv->buffer_lock);
+
+ memcpy_and_pad(priv->buffer, MAX_REPORT_LENGTH, cmd, cmd_length, 0x00);
+ ret = hid_hw_output_report(priv->hdev, priv->buffer, MAX_REPORT_LENGTH);
+
+ mutex_unlock(&priv->buffer_lock);
+ return ret;
+}
+
+static int kraken3_percent_to_pwm(long val)
+{
+ return DIV_ROUND_CLOSEST(val * 255, 100);
+}
+
+static int kraken3_pwm_to_percent(long val, int channel)
+{
+ int percent_value;
+
+ if (val < 0 || val > 255)
+ return -EINVAL;
+
+ percent_value = DIV_ROUND_CLOSEST(val * 100, 255);
+
+ /* Bring up pump duty to min value if needed */
+ if (channel == 0 && percent_value < PUMP_DUTY_MIN)
+ percent_value = PUMP_DUTY_MIN;
+
+ return percent_value;
+}
+
+static int kraken3_read_x53(struct kraken3_data *priv)
+{
+ int ret;
+
+ if (completion_done(&priv->status_report_processed))
+ /*
+ * We're here because data is stale. This means that sensor reports haven't
+ * been received for some time in kraken3_raw_event(). On X-series sensor data
+ * can't be manually requested, so return an error.
+ */
+ return -ENODATA;
+
+ /*
+ * Data needs to be read, but a sensor report wasn't yet received. It's usually
+ * fancontrol that requests data this early and it exits if it reads an error code.
+ * So, wait for the first report to be parsed (but up to STATUS_VALIDITY).
+ * This does not concern the Z series devices, because they send a sensor report
+ * only when requested.
+ */
+ ret = wait_for_completion_interruptible_timeout(&priv->status_report_processed,
+ msecs_to_jiffies(STATUS_VALIDITY));
+ if (ret == 0)
+ return -ETIMEDOUT;
+ else if (ret < 0)
+ return ret;
+
+ /* The first sensor report was parsed on time and reading can continue */
+ return 0;
+}
+
+static int kraken3_read_z53(struct kraken3_data *priv)
+{
+ int ret = mutex_lock_interruptible(&priv->z53_status_request_lock);
+
+ if (ret < 0)
+ return ret;
+
+ if (!time_after(jiffies, priv->updated + msecs_to_jiffies(STATUS_VALIDITY))) {
+ /* Data is up to date */
+ goto unlock_and_return;
+ }
+
+ /*
+ * Disable interrupts for a moment to safely reinit the completion,
+ * as hidraw calls could have allowed one or more readers to complete.
+ */
+ spin_lock_bh(&priv->status_completion_lock);
+ reinit_completion(&priv->status_report_processed);
+ spin_unlock_bh(&priv->status_completion_lock);
+
+ /* Send command for getting status */
+ ret = kraken3_write_expanded(priv, z53_get_status_cmd, Z53_GET_STATUS_CMD_LENGTH);
+ if (ret < 0)
+ goto unlock_and_return;
+
+ /* Wait for completion from kraken3_raw_event() */
+ ret = wait_for_completion_interruptible_timeout(&priv->status_report_processed,
+ msecs_to_jiffies(STATUS_VALIDITY));
+ if (ret == 0)
+ ret = -ETIMEDOUT;
+
+unlock_and_return:
+ mutex_unlock(&priv->z53_status_request_lock);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int kraken3_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel,
+ long *val)
+{
+ struct kraken3_data *priv = dev_get_drvdata(dev);
+ int ret;
+
+ if (time_after(jiffies, priv->updated + msecs_to_jiffies(STATUS_VALIDITY))) {
+ if (priv->kind == X53)
+ ret = kraken3_read_x53(priv);
+ else
+ ret = kraken3_read_z53(priv);
+
+ if (ret < 0)
+ return ret;
+
+ if (priv->is_device_faulty)
+ return -ENODATA;
+ }
+
+ switch (type) {
+ case hwmon_temp:
+ *val = priv->temp_input[channel];
+ break;
+ case hwmon_fan:
+ *val = priv->fan_input[channel];
+ break;
+ case hwmon_pwm:
+ switch (attr) {
+ case hwmon_pwm_enable:
+ *val = priv->channel_info[channel].mode;
+ break;
+ case hwmon_pwm_input:
+ *val = priv->channel_info[channel].reported_duty;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+static int kraken3_read_string(struct device *dev, enum hwmon_sensor_types type, u32 attr,
+ int channel, const char **str)
+{
+ switch (type) {
+ case hwmon_temp:
+ *str = kraken3_temp_label[channel];
+ break;
+ case hwmon_fan:
+ *str = kraken3_fan_label[channel];
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+/* Writes custom curve to device */
+static int kraken3_write_curve(struct kraken3_data *priv, u8 *curve_array, int channel)
+{
+ u8 fixed_duty_cmd[SET_CURVE_DUTY_CMD_LENGTH];
+ int ret;
+
+ /* Copy command header */
+ memcpy(fixed_duty_cmd, set_pump_duty_cmd_header, SET_CURVE_DUTY_CMD_HEADER_LENGTH);
+
+ /* Set the correct ID for writing pump/fan duty (0x01 or 0x02, respectively) */
+ fixed_duty_cmd[SET_DUTY_ID_OFFSET] = channel + 1;
+
+ /* Copy curve to command */
+ memcpy(fixed_duty_cmd + SET_CURVE_DUTY_CMD_HEADER_LENGTH, curve_array, CUSTOM_CURVE_POINTS);
+
+ ret = kraken3_write_expanded(priv, fixed_duty_cmd, SET_CURVE_DUTY_CMD_LENGTH);
+ return ret;
+}
+
+static int kraken3_write_fixed_duty(struct kraken3_data *priv, long val, int channel)
+{
+ u8 fixed_curve_points[CUSTOM_CURVE_POINTS];
+ int ret, percent_val, i;
+
+ percent_val = kraken3_pwm_to_percent(val, channel);
+ if (percent_val < 0)
+ return percent_val;
+
+ /*
+ * The devices can only control the duty through a curve.
+ * Since we're setting a fixed duty here, fill the whole curve
+ * (ranging from 20C to 59C) with the same duty, except for
+ * the last point, the critical temperature, where it's maxed
+ * out for safety.
+ */
+
+ /* Fill the custom curve with the fixed value we're setting */
+ for (i = 0; i < CUSTOM_CURVE_POINTS - 1; i++)
+ fixed_curve_points[i] = percent_val;
+
+ /* Force duty to 100% at critical temp */
+ fixed_curve_points[CUSTOM_CURVE_POINTS - 1] = 100;
+
+ /* Write the fixed duty curve to the device */
+ ret = kraken3_write_curve(priv, fixed_curve_points, channel);
+ return ret;
+}
+
+static int kraken3_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel,
+ long val)
+{
+ struct kraken3_data *priv = dev_get_drvdata(dev);
+ int ret;
+
+ switch (type) {
+ case hwmon_pwm:
+ switch (attr) {
+ case hwmon_pwm_input:
+ /* Remember the last set fixed duty for channel */
+ priv->channel_info[channel].fixed_duty = val;
+
+ if (priv->channel_info[channel].mode == manual) {
+ ret = kraken3_write_fixed_duty(priv, val, channel);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Lock onto this value and report it until next interrupt status
+ * report is received, so userspace tools can continue to work.
+ */
+ priv->channel_info[channel].reported_duty = val;
+ }
+ break;
+ case hwmon_pwm_enable:
+ if (val < 0 || val > 2)
+ return -EINVAL;
+
+ switch (val) {
+ case 0:
+ /* Set channel to 100%, direct duty value */
+ ret = kraken3_write_fixed_duty(priv, 255, channel);
+ if (ret < 0)
+ return ret;
+
+ /* We don't control anything anymore */
+ priv->channel_info[channel].mode = off;
+ break;
+ case 1:
+ /* Apply the last known direct duty value */
+ ret =
+ kraken3_write_fixed_duty(priv,
+ priv->channel_info[channel].fixed_duty,
+ channel);
+ if (ret < 0)
+ return ret;
+
+ priv->channel_info[channel].mode = manual;
+ break;
+ case 2:
+ /* Apply the curve and note as enabled */
+ ret =
+ kraken3_write_curve(priv,
+ priv->channel_info[channel].pwm_points,
+ channel);
+ if (ret < 0)
+ return ret;
+
+ priv->channel_info[channel].mode = curve;
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+static ssize_t kraken3_fan_curve_pwm_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *dev_attr = to_sensor_dev_attr_2(attr);
+ struct kraken3_data *priv = dev_get_drvdata(dev);
+ long val;
+ int ret;
+
+ if (kstrtol(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ val = kraken3_pwm_to_percent(val, dev_attr->nr);
+ if (val < 0)
+ return val;
+
+ priv->channel_info[dev_attr->nr].pwm_points[dev_attr->index] = val;
+
+ if (priv->channel_info[dev_attr->nr].mode == curve) {
+ /* Apply the curve */
+ ret =
+ kraken3_write_curve(priv,
+ priv->channel_info[dev_attr->nr].pwm_points, dev_attr->nr);
+ if (ret < 0)
+ return ret;
+ }
+
+ return count;
+}
+
+static umode_t kraken3_curve_props_are_visible(struct kobject *kobj, struct attribute *attr,
+ int index)
+{
+ struct device *dev = kobj_to_dev(kobj);
+ struct kraken3_data *priv = dev_get_drvdata(dev);
+
+ /* Only Z53 has the fan curve */
+ if (index >= CUSTOM_CURVE_POINTS && priv->kind != Z53)
+ return 0;
+
+ return attr->mode;
+}
+
+/* Custom pump curve from 20C to 59C (critical temp) */
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point1_pwm, kraken3_fan_curve_pwm, 0, 0);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point2_pwm, kraken3_fan_curve_pwm, 0, 1);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point3_pwm, kraken3_fan_curve_pwm, 0, 2);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point4_pwm, kraken3_fan_curve_pwm, 0, 3);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point5_pwm, kraken3_fan_curve_pwm, 0, 4);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point6_pwm, kraken3_fan_curve_pwm, 0, 5);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point7_pwm, kraken3_fan_curve_pwm, 0, 6);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point8_pwm, kraken3_fan_curve_pwm, 0, 7);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point9_pwm, kraken3_fan_curve_pwm, 0, 8);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point10_pwm, kraken3_fan_curve_pwm, 0, 9);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point11_pwm, kraken3_fan_curve_pwm, 0, 10);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point12_pwm, kraken3_fan_curve_pwm, 0, 11);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point13_pwm, kraken3_fan_curve_pwm, 0, 12);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point14_pwm, kraken3_fan_curve_pwm, 0, 13);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point15_pwm, kraken3_fan_curve_pwm, 0, 14);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point16_pwm, kraken3_fan_curve_pwm, 0, 15);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point17_pwm, kraken3_fan_curve_pwm, 0, 16);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point18_pwm, kraken3_fan_curve_pwm, 0, 17);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point19_pwm, kraken3_fan_curve_pwm, 0, 18);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point20_pwm, kraken3_fan_curve_pwm, 0, 19);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point21_pwm, kraken3_fan_curve_pwm, 0, 20);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point22_pwm, kraken3_fan_curve_pwm, 0, 21);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point23_pwm, kraken3_fan_curve_pwm, 0, 22);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point24_pwm, kraken3_fan_curve_pwm, 0, 23);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point25_pwm, kraken3_fan_curve_pwm, 0, 24);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point26_pwm, kraken3_fan_curve_pwm, 0, 25);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point27_pwm, kraken3_fan_curve_pwm, 0, 26);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point28_pwm, kraken3_fan_curve_pwm, 0, 27);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point29_pwm, kraken3_fan_curve_pwm, 0, 28);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point30_pwm, kraken3_fan_curve_pwm, 0, 29);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point31_pwm, kraken3_fan_curve_pwm, 0, 30);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point32_pwm, kraken3_fan_curve_pwm, 0, 31);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point33_pwm, kraken3_fan_curve_pwm, 0, 32);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point34_pwm, kraken3_fan_curve_pwm, 0, 33);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point35_pwm, kraken3_fan_curve_pwm, 0, 34);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point36_pwm, kraken3_fan_curve_pwm, 0, 35);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point37_pwm, kraken3_fan_curve_pwm, 0, 36);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point38_pwm, kraken3_fan_curve_pwm, 0, 37);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point39_pwm, kraken3_fan_curve_pwm, 0, 38);
+static SENSOR_DEVICE_ATTR_2_WO(temp1_auto_point40_pwm, kraken3_fan_curve_pwm, 0, 39);
+
+/* Custom fan curve from 20C to 59C (critical temp) */
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point1_pwm, kraken3_fan_curve_pwm, 1, 0);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point2_pwm, kraken3_fan_curve_pwm, 1, 1);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point3_pwm, kraken3_fan_curve_pwm, 1, 2);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point4_pwm, kraken3_fan_curve_pwm, 1, 3);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point5_pwm, kraken3_fan_curve_pwm, 1, 4);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point6_pwm, kraken3_fan_curve_pwm, 1, 5);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point7_pwm, kraken3_fan_curve_pwm, 1, 6);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point8_pwm, kraken3_fan_curve_pwm, 1, 7);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point9_pwm, kraken3_fan_curve_pwm, 1, 8);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point10_pwm, kraken3_fan_curve_pwm, 1, 9);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point11_pwm, kraken3_fan_curve_pwm, 1, 10);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point12_pwm, kraken3_fan_curve_pwm, 1, 11);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point13_pwm, kraken3_fan_curve_pwm, 1, 12);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point14_pwm, kraken3_fan_curve_pwm, 1, 13);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point15_pwm, kraken3_fan_curve_pwm, 1, 14);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point16_pwm, kraken3_fan_curve_pwm, 1, 15);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point17_pwm, kraken3_fan_curve_pwm, 1, 16);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point18_pwm, kraken3_fan_curve_pwm, 1, 17);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point19_pwm, kraken3_fan_curve_pwm, 1, 18);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point20_pwm, kraken3_fan_curve_pwm, 1, 19);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point21_pwm, kraken3_fan_curve_pwm, 1, 20);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point22_pwm, kraken3_fan_curve_pwm, 1, 21);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point23_pwm, kraken3_fan_curve_pwm, 1, 22);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point24_pwm, kraken3_fan_curve_pwm, 1, 23);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point25_pwm, kraken3_fan_curve_pwm, 1, 24);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point26_pwm, kraken3_fan_curve_pwm, 1, 25);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point27_pwm, kraken3_fan_curve_pwm, 1, 26);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point28_pwm, kraken3_fan_curve_pwm, 1, 27);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point29_pwm, kraken3_fan_curve_pwm, 1, 28);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point30_pwm, kraken3_fan_curve_pwm, 1, 29);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point31_pwm, kraken3_fan_curve_pwm, 1, 30);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point32_pwm, kraken3_fan_curve_pwm, 1, 31);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point33_pwm, kraken3_fan_curve_pwm, 1, 32);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point34_pwm, kraken3_fan_curve_pwm, 1, 33);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point35_pwm, kraken3_fan_curve_pwm, 1, 34);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point36_pwm, kraken3_fan_curve_pwm, 1, 35);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point37_pwm, kraken3_fan_curve_pwm, 1, 36);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point38_pwm, kraken3_fan_curve_pwm, 1, 37);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point39_pwm, kraken3_fan_curve_pwm, 1, 38);
+static SENSOR_DEVICE_ATTR_2_WO(temp2_auto_point40_pwm, kraken3_fan_curve_pwm, 1, 39);
+
+static struct attribute *kraken3_curve_attrs[] = {
+ /* Pump control curve */
+ &sensor_dev_attr_temp1_auto_point1_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point2_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point3_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point4_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point5_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point6_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point7_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point8_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point9_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point10_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point11_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point12_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point13_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point14_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point15_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point16_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point17_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point18_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point19_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point20_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point21_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point22_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point23_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point24_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point25_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point26_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point27_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point28_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point29_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point30_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point31_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point32_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point33_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point34_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point35_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point36_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point37_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point38_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point39_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp1_auto_point40_pwm.dev_attr.attr,
+ /* Fan control curve (Z53 only) */
+ &sensor_dev_attr_temp2_auto_point1_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point2_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point3_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point4_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point5_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point6_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point7_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point8_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point9_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point10_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point11_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point12_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point13_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point14_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point15_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point16_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point17_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point18_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point19_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point20_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point21_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point22_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point23_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point24_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point25_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point26_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point27_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point28_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point29_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point30_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point31_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point32_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point33_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point34_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point35_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point36_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point37_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point38_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point39_pwm.dev_attr.attr,
+ &sensor_dev_attr_temp2_auto_point40_pwm.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group kraken3_curves_group = {
+ .attrs = kraken3_curve_attrs,
+ .is_visible = kraken3_curve_props_are_visible
+};
+
+static const struct attribute_group *kraken3_groups[] = {
+ &kraken3_curves_group,
+ NULL
+};
+
+static const struct hwmon_ops kraken3_hwmon_ops = {
+ .is_visible = kraken3_is_visible,
+ .read = kraken3_read,
+ .read_string = kraken3_read_string,
+ .write = kraken3_write
+};
+
+static const struct hwmon_channel_info *kraken3_info[] = {
+ HWMON_CHANNEL_INFO(temp,
+ HWMON_T_INPUT | HWMON_T_LABEL),
+ HWMON_CHANNEL_INFO(fan,
+ HWMON_F_INPUT | HWMON_F_LABEL,
+ HWMON_F_INPUT | HWMON_F_LABEL,
+ HWMON_F_INPUT | HWMON_F_LABEL,
+ HWMON_F_INPUT | HWMON_F_LABEL),
+ HWMON_CHANNEL_INFO(pwm,
+ HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
+ HWMON_PWM_INPUT | HWMON_PWM_ENABLE),
+ NULL
+};
+
+static const struct hwmon_chip_info kraken3_chip_info = {
+ .ops = &kraken3_hwmon_ops,
+ .info = kraken3_info,
+};
+
+static int kraken3_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data, int size)
+{
+ struct kraken3_data *priv = hid_get_drvdata(hdev);
+ int i;
+
+ if (size < MIN_REPORT_LENGTH)
+ return 0;
+
+ if (report->id == FIRMWARE_REPORT_ID) {
+ /* Read firmware version */
+ for (i = 0; i < 3; i++)
+ priv->firmware_version[i] = data[FIRMWARE_VERSION_OFFSET + i];
+
+ if (!completion_done(&priv->fw_version_processed))
+ complete_all(&priv->fw_version_processed);
+
+ return 0;
+ }
+
+ if (report->id != STATUS_REPORT_ID)
+ return 0;
+
+ if (data[TEMP_SENSOR_START_OFFSET] == 0xff && data[TEMP_SENSOR_END_OFFSET] == 0xff) {
+ hid_err_once(hdev,
+ "firmware or device is possibly damaged (is SATA power connected?), not parsing reports\n");
+
+ /*
+ * Mark first X-series device report as received,
+ * as well as all for Z-series, if faulty.
+ */
+ spin_lock(&priv->status_completion_lock);
+ if (priv->kind != X53 || !completion_done(&priv->status_report_processed)) {
+ priv->is_device_faulty = true;
+ complete_all(&priv->status_report_processed);
+ }
+ spin_unlock(&priv->status_completion_lock);
+
+ return 0;
+ }
+
+ /* Received normal data */
+ priv->is_device_faulty = false;
+
+ /* Temperature and fan sensor readings */
+ priv->temp_input[0] =
+ data[TEMP_SENSOR_START_OFFSET] * 1000 + data[TEMP_SENSOR_END_OFFSET] * 100;
+
+ priv->fan_input[0] = get_unaligned_le16(data + PUMP_SPEED_OFFSET);
+ priv->channel_info[0].reported_duty = kraken3_percent_to_pwm(data[PUMP_DUTY_OFFSET]);
+
+ spin_lock(&priv->status_completion_lock);
+ if (priv->kind == X53 && !completion_done(&priv->status_report_processed)) {
+ /* Mark first X-series device report as received */
+ complete_all(&priv->status_report_processed);
+ } else if (priv->kind == Z53) {
+ /* Additional readings for Z53 */
+ priv->fan_input[1] = get_unaligned_le16(data + Z53_FAN_SPEED_OFFSET);
+ priv->channel_info[1].reported_duty =
+ kraken3_percent_to_pwm(data[Z53_FAN_DUTY_OFFSET]);
+
+ if (!completion_done(&priv->status_report_processed))
+ complete_all(&priv->status_report_processed);
+ }
+ spin_unlock(&priv->status_completion_lock);
+
+ priv->updated = jiffies;
+
+ return 0;
+}
+
+static int kraken3_init_device(struct hid_device *hdev)
+{
+ struct kraken3_data *priv = hid_get_drvdata(hdev);
+ int ret;
+
+ /* Set the polling interval */
+ ret = kraken3_write_expanded(priv, set_interval_cmd, SET_INTERVAL_CMD_LENGTH);
+ if (ret < 0)
+ return ret;
+
+ /* Finalize the init process */
+ ret = kraken3_write_expanded(priv, finish_init_cmd, FINISH_INIT_CMD_LENGTH);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int kraken3_get_fw_ver(struct hid_device *hdev)
+{
+ struct kraken3_data *priv = hid_get_drvdata(hdev);
+ int ret;
+
+ ret = kraken3_write_expanded(priv, get_fw_version_cmd, GET_FW_VERSION_CMD_LENGTH);
+ if (ret < 0)
+ return ret;
+
+ ret = wait_for_completion_interruptible_timeout(&priv->fw_version_processed,
+ msecs_to_jiffies(STATUS_VALIDITY));
+ if (ret == 0)
+ return -ETIMEDOUT;
+ else if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int __maybe_unused kraken3_reset_resume(struct hid_device *hdev)
+{
+ int ret;
+
+ ret = kraken3_init_device(hdev);
+ if (ret)
+ hid_err(hdev, "req init (reset_resume) failed with %d\n", ret);
+
+ return ret;
+}
+
+static int firmware_version_show(struct seq_file *seqf, void *unused)
+{
+ struct kraken3_data *priv = seqf->private;
+
+ seq_printf(seqf, "%u.%u.%u\n", priv->firmware_version[0], priv->firmware_version[1],
+ priv->firmware_version[2]);
+
+ return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(firmware_version);
+
+static void kraken3_debugfs_init(struct kraken3_data *priv)
+{
+ char name[64];
+
+ if (!priv->firmware_version[0])
+ return; /* Nothing to display in debugfs */
+
+ scnprintf(name, sizeof(name), "%s_%s-%s", DRIVER_NAME, kraken3_device_names[priv->kind],
+ dev_name(&priv->hdev->dev));
+
+ priv->debugfs = debugfs_create_dir(name, NULL);
+ debugfs_create_file("firmware_version", 0444, priv->debugfs, priv, &firmware_version_fops);
+}
+
+static int kraken3_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ struct kraken3_data *priv;
+ int ret;
+
+ priv = devm_kzalloc(&hdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->hdev = hdev;
+ hid_set_drvdata(hdev, priv);
+
+ /*
+ * Initialize ->updated to STATUS_VALIDITY seconds in the past, making
+ * the initial empty data invalid for kraken3_read without the need for
+ * a special case there.
+ */
+ priv->updated = jiffies - msecs_to_jiffies(STATUS_VALIDITY);
+
+ ret = hid_parse(hdev);
+ if (ret) {
+ hid_err(hdev, "hid parse failed with %d\n", ret);
+ return ret;
+ }
+
+ /* Enable hidraw so existing user-space tools can continue to work */
+ ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
+ if (ret) {
+ hid_err(hdev, "hid hw start failed with %d\n", ret);
+ return ret;
+ }
+
+ ret = hid_hw_open(hdev);
+ if (ret) {
+ hid_err(hdev, "hid hw open failed with %d\n", ret);
+ goto fail_and_stop;
+ }
+
+ switch (hdev->product) {
+ case USB_PRODUCT_ID_X53:
+ case USB_PRODUCT_ID_X53_SECOND:
+ priv->kind = X53;
+ break;
+ case USB_PRODUCT_ID_Z53:
+ priv->kind = Z53;
+ break;
+ default:
+ break;
+ }
+
+ priv->buffer = devm_kzalloc(&hdev->dev, MAX_REPORT_LENGTH, GFP_KERNEL);
+ if (!priv->buffer) {
+ ret = -ENOMEM;
+ goto fail_and_close;
+ }
+
+ mutex_init(&priv->buffer_lock);
+ mutex_init(&priv->z53_status_request_lock);
+ init_completion(&priv->fw_version_processed);
+ init_completion(&priv->status_report_processed);
+ spin_lock_init(&priv->status_completion_lock);
+
+ hid_device_io_start(hdev);
+ ret = kraken3_init_device(hdev);
+ if (ret < 0) {
+ hid_err(hdev, "device init failed with %d\n", ret);
+ goto fail_and_close;
+ }
+
+ ret = kraken3_get_fw_ver(hdev);
+ if (ret < 0)
+ hid_warn(hdev, "fw version request failed with %d\n", ret);
+
+ priv->hwmon_dev = hwmon_device_register_with_info(&hdev->dev,
+ kraken3_device_names[priv->kind], priv,
+ &kraken3_chip_info, kraken3_groups);
+ if (IS_ERR(priv->hwmon_dev)) {
+ ret = PTR_ERR(priv->hwmon_dev);
+ hid_err(hdev, "hwmon registration failed with %d\n", ret);
+ goto fail_and_close;
+ }
+
+ kraken3_debugfs_init(priv);
+
+ return 0;
+
+fail_and_close:
+ hid_hw_close(hdev);
+fail_and_stop:
+ hid_hw_stop(hdev);
+ return ret;
+}
+
+static void kraken3_remove(struct hid_device *hdev)
+{
+ struct kraken3_data *priv = hid_get_drvdata(hdev);
+
+ debugfs_remove_recursive(priv->debugfs);
+ hwmon_device_unregister(priv->hwmon_dev);
+
+ hid_hw_close(hdev);
+ hid_hw_stop(hdev);
+}
+
+static const struct hid_device_id kraken3_table[] = {
+ /* NZXT Kraken X53/X63/X73 have two possible product IDs */
+ { HID_USB_DEVICE(USB_VENDOR_ID_NZXT, USB_PRODUCT_ID_X53) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NZXT, USB_PRODUCT_ID_X53_SECOND) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NZXT, USB_PRODUCT_ID_Z53) },
+ { }
+};
+
+MODULE_DEVICE_TABLE(hid, kraken3_table);
+
+static struct hid_driver kraken3_driver = {
+ .name = DRIVER_NAME,
+ .id_table = kraken3_table,
+ .probe = kraken3_probe,
+ .remove = kraken3_remove,
+ .raw_event = kraken3_raw_event,
+#ifdef CONFIG_PM
+ .reset_resume = kraken3_reset_resume,
+#endif
+};
+
+static int __init kraken3_init(void)
+{
+ return hid_register_driver(&kraken3_driver);
+}
+
+static void __exit kraken3_exit(void)
+{
+ hid_unregister_driver(&kraken3_driver);
+}
+
+/* When compiled into the kernel, initialize after the HID bus */
+late_initcall(kraken3_init);
+module_exit(kraken3_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jonas Malaco <jonas@xxxxxxxxxxxx>");
+MODULE_AUTHOR("Aleksa Savic <savicaleksa83@xxxxxxxxx>");
+MODULE_DESCRIPTION("Hwmon driver for NZXT Kraken X53/X63/X73, Z53/Z63/Z73 coolers");
--
2.43.0
