On Fri, 8 Dec 2023 14:11:44 +0100
Aleksa Savic <savicaleksa83@xxxxxxxxx> wrote:
> On 2023-12-08 14:07:10 GMT+01:00, Aleksa Savic wrote:
> > When built-in to the kernel, the corsair-psu driver fails to register with
> > the following message:
> >
> > "Driver 'corsair-psu' was unable to register with bus_type 'hid'
> > because the bus was not initialized."
> >
> > Fix this by initializing the driver after the HID bus using
> > late_initcall(), as hwmon is built before HID.
> >
> > Fixes: d115b51e0e56 ("hwmon: add Corsair PSU HID controller driver")
> > Signed-off-by: Aleksa Savic <savicaleksa83@xxxxxxxxx>
> > ---
> > drivers/hwmon/corsair-psu.c | 15 ++++++++++++++-
> > 1 file changed, 14 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c
> > index 904890598c11..48831a528965 100644
> > --- a/drivers/hwmon/corsair-psu.c
> > +++ b/drivers/hwmon/corsair-psu.c
> > @@ -899,7 +899,20 @@ static struct hid_driver corsairpsu_driver = {
> > .reset_resume = corsairpsu_resume,
> > #endif
> > };
> > -module_hid_driver(corsairpsu_driver);
> > +
> > +static int __init corsairpsu_hid_init(void)
> > +{
> > + return hid_register_driver(&corsairpsu_driver);
> > +}
> > +
> > +static void __exit corsairpsu_hid_exit(void)
> > +{
> > + hid_unregister_driver(&corsairpsu_driver);
> > +}
> > +
> > +/* When compiled into the kernel, initialize after the hid bus */
> > +late_initcall(corsairpsu_hid_init);
> > +module_exit(corsairpsu_hid_exit);
> >
> > MODULE_LICENSE("GPL");
> > MODULE_AUTHOR("Wilken Gottwalt <wilken.gottwalt@xxxxxxxxxx>");
>
>
> Woops! Just saw that the same fix was sent yesterday. Please disregard, sorry!
>
> Aleksa
It is fine. I just start to wonder if there was a change in the subsystem. I
used the driver as built-in in the past for several months and never had that
issue. And now it is a real flood of reports.
greetings,
Will
