This reverts commit 393935baa45e5ccb9603cf7f9f020ed1bc0915f7.
As reported by Ian Nartowicz, this and the next patch
result in a failure to load the driver on Celsius W280.
While the alternative would be to add the board to the DMI
override table, it is quite likely that other systems are
also affected. Revert the offending patches to avoid future
problems.
Fixes: 393935baa45e ("hwmon: (sch56xx-common) Add automatic module loading on supported devices")
Reported-by: Ian Nartowicz <deadbeef@xxxxxxxxxxxxxxx>
Closes: https://lore.kernel.org/linux-hwmon/20231025192239.3c5389ae@xxxxxxxxxx/T/#t
Cc: Armin Wolf <W_Armin@xxxxxx>
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
drivers/hwmon/sch56xx-common.c | 40 ++--------------------------------
1 file changed, 2 insertions(+), 38 deletions(-)
diff --git a/drivers/hwmon/sch56xx-common.c b/drivers/hwmon/sch56xx-common.c
index 3ece53adabd6..ac1f72580715 100644
--- a/drivers/hwmon/sch56xx-common.c
+++ b/drivers/hwmon/sch56xx-common.c
@@ -7,10 +7,8 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
-#include <linux/mod_devicetable.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/dmi.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/acpi.h>
@@ -21,10 +19,7 @@
#include <linux/slab.h>
#include "sch56xx-common.h"
-static bool ignore_dmi;
-module_param(ignore_dmi, bool, 0);
-MODULE_PARM_DESC(ignore_dmi, "Omit DMI check for supported devices (default=0)");
-
+/* Insmod parameters */
static bool nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, bool, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
@@ -523,42 +518,11 @@ static int __init sch56xx_device_add(int address, const char *name)
return PTR_ERR_OR_ZERO(sch56xx_pdev);
}
-/* For autoloading only */
-static const struct dmi_system_id sch56xx_dmi_table[] __initconst = {
- {
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
- },
- },
- { }
-};
-MODULE_DEVICE_TABLE(dmi, sch56xx_dmi_table);
-
static int __init sch56xx_init(void)
{
- const char *name = NULL;
int address;
+ const char *name = NULL;
- if (!ignore_dmi) {
- if (!dmi_check_system(sch56xx_dmi_table))
- return -ENODEV;
-
- /*
- * Some machines like the Esprimo P720 and Esprimo C700 have
- * onboard devices named " Antiope"/" Theseus" instead of
- * "Antiope"/"Theseus", so we need to check for both.
- */
- if (!dmi_find_device(DMI_DEV_TYPE_OTHER, "Antiope", NULL) &&
- !dmi_find_device(DMI_DEV_TYPE_OTHER, " Antiope", NULL) &&
- !dmi_find_device(DMI_DEV_TYPE_OTHER, "Theseus", NULL) &&
- !dmi_find_device(DMI_DEV_TYPE_OTHER, " Theseus", NULL))
- return -ENODEV;
- }
-
- /*
- * Some devices like the Esprimo C700 have both onboard devices,
- * so we still have to check manually
- */
address = sch56xx_find(0x4e, &name);
if (address < 0)
address = sch56xx_find(0x2e, &name);
--
2.39.2
