Re: [PATCH v8 3/3] hwmon: (aspeed-g6-pwm-tacho): Support for ASPEED g6 PWM/Fan tach

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 8/30/23 20:32, Billy Tsai wrote:
> +static int aspeed_tach_hwmon_write(struct device *dev,
> +				   enum hwmon_sensor_types type, u32 attr,
> +				   int channel, long val)
> +{
> +	struct aspeed_pwm_tach_data *priv = dev_get_drvdata(dev);
> +	u32 reg_val;
> +
> +	switch (attr) {
> +	case hwmon_fan_div:
> +		if (!is_power_of_2(val) || (ilog2(val) % 2) ||
> +		    DIV_TO_REG(val) > 0xb)
> +			return -EINVAL;
> +		priv->tach_divisor = val;
> +		reg_val = readl(priv->base + TACH_ASPEED_CTRL(channel));
> +		reg_val &= ~TACH_ASPEED_CLK_DIV_T_MASK;
> +		reg_val |= FIELD_GET(TACH_ASPEED_CLK_DIV_T_MASK,
> +				     DIV_TO_REG(priv->tach_divisor));
Hi Billy,
I notice the fanX_div is always shows 1 after I set 1024.
I think FIELD_GET() needs to replaced with FIELD_PREP().

> +		writel(reg_val, priv->base + TACH_ASPEED_CTRL(channel));
> +		break;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +
> +	return 0;
> +}


> +static void aspeed_present_fan_tach(struct aspeed_pwm_tach_data *priv, u32 tach_ch)
> +{
> +	u32 val;
> +
> +	priv->tach_present[tach_ch] = true;
> +	priv->tach_divisor = DEFAULT_TACH_DIV;
> +
> +	val = readl(priv->base + TACH_ASPEED_CTRL(tach_ch));
> +	val &= ~(TACH_ASPEED_INVERS_LIMIT | TACH_ASPEED_DEBOUNCE_MASK |
> +		 TACH_ASPEED_IO_EDGE_MASK | TACH_ASPEED_CLK_DIV_T_MASK |
> +		 TACH_ASPEED_THRESHOLD_MASK);
> +	val |= (DEBOUNCE_3_CLK << TACH_ASPEED_DEBOUNCE_BIT) | F2F_EDGES |
> +	       FIELD_GET(TACH_ASPEED_CLK_DIV_T_MASK,
> +			 DIV_TO_REG(priv->tach_divisor));
And here as well.

> +	writel(val, priv->base + TACH_ASPEED_CTRL(tach_ch));
> +
> +	aspeed_tach_ch_enable(priv, tach_ch, true);
> +}
> +
>




[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux