Hi Thomas, kernel test robot noticed the following build errors: [auto build test ERROR on b97d64c722598ffed42ece814a2cb791336c6679] url: https://github.com/intel-lab-lkp/linux/commits/Thomas-Wei-schuh/hwmon-add-POWER-Z-driver/20230831-164650 base: b97d64c722598ffed42ece814a2cb791336c6679 patch link: https://lore.kernel.org/r/20230831-powerz-v1-1-03979e519f52%40weissschuh.net patch subject: [PATCH] hwmon: add POWER-Z driver config: mips-allmodconfig (attached as .config) compiler: mips-linux-gcc (GCC) 13.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20230831/202308311825.k4rhexnc-lkp@xxxxxxxxx/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@xxxxxxxxx> | Closes: https://lore.kernel.org/oe-kbuild-all/202308311825.k4rhexnc-lkp@xxxxxxxxx/ All errors (new ones prefixed by >>): >> drivers/hwmon/Kconfig:844: syntax error drivers/hwmon/Kconfig:843:warning: ignoring unsupported character ';' drivers/hwmon/Kconfig:843: invalid statement drivers/hwmon/Kconfig:844: invalid statement drivers/hwmon/Kconfig:845: invalid statement drivers/hwmon/Kconfig:846: unknown statement "If" drivers/hwmon/Kconfig:847:warning: ignoring unsupported character '.' drivers/hwmon/Kconfig:847: unknown statement "USB-C" drivers/hwmon/Kconfig:849:warning: ignoring unsupported character '.' drivers/hwmon/Kconfig:849:warning: ignoring unsupported character ',' drivers/hwmon/Kconfig:849: unknown statement "This" drivers/hwmon/Kconfig:850:warning: ignoring unsupported character '.' drivers/hwmon/Kconfig:850: unknown statement "will" make[3]: *** [scripts/kconfig/Makefile:77: allmodconfig] Error 1 make[2]: *** [Makefile:706: allmodconfig] Error 2 make[1]: *** [Makefile:234: __sub-make] Error 2 make[1]: Target 'allmodconfig' not remade because of errors. make: *** [Makefile:234: __sub-make] Error 2 make: Target 'allmodconfig' not remade because of errors. -- >> drivers/hwmon/Kconfig:844: syntax error drivers/hwmon/Kconfig:843:warning: ignoring unsupported character ';' drivers/hwmon/Kconfig:843: invalid statement drivers/hwmon/Kconfig:844: invalid statement drivers/hwmon/Kconfig:845: invalid statement drivers/hwmon/Kconfig:846: unknown statement "If" drivers/hwmon/Kconfig:847:warning: ignoring unsupported character '.' drivers/hwmon/Kconfig:847: unknown statement "USB-C" drivers/hwmon/Kconfig:849:warning: ignoring unsupported character '.' drivers/hwmon/Kconfig:849:warning: ignoring unsupported character ',' drivers/hwmon/Kconfig:849: unknown statement "This" drivers/hwmon/Kconfig:850:warning: ignoring unsupported character '.' drivers/hwmon/Kconfig:850: unknown statement "will" make[3]: *** [scripts/kconfig/Makefile:77: oldconfig] Error 1 make[2]: *** [Makefile:706: oldconfig] Error 2 make[1]: *** [Makefile:234: __sub-make] Error 2 make[1]: Target 'oldconfig' not remade because of errors. make: *** [Makefile:234: __sub-make] Error 2 make: Target 'oldconfig' not remade because of errors. -- >> drivers/hwmon/Kconfig:844: syntax error drivers/hwmon/Kconfig:843:warning: ignoring unsupported character ';' drivers/hwmon/Kconfig:843: invalid statement drivers/hwmon/Kconfig:844: invalid statement drivers/hwmon/Kconfig:845: invalid statement drivers/hwmon/Kconfig:846: unknown statement "If" drivers/hwmon/Kconfig:847:warning: ignoring unsupported character '.' drivers/hwmon/Kconfig:847: unknown statement "USB-C" drivers/hwmon/Kconfig:849:warning: ignoring unsupported character '.' drivers/hwmon/Kconfig:849:warning: ignoring unsupported character ',' drivers/hwmon/Kconfig:849: unknown statement "This" drivers/hwmon/Kconfig:850:warning: ignoring unsupported character '.' drivers/hwmon/Kconfig:850: unknown statement "will" make[3]: *** [scripts/kconfig/Makefile:77: olddefconfig] Error 1 make[2]: *** [Makefile:706: olddefconfig] Error 2 make[1]: *** [Makefile:234: __sub-make] Error 2 make[1]: Target 'olddefconfig' not remade because of errors. make: *** [Makefile:234: __sub-make] Error 2 make: Target 'olddefconfig' not remade because of errors. vim +844 drivers/hwmon/Kconfig 40 41 config SENSORS_ABITUGURU 42 tristate "Abit uGuru (rev 1 & 2)" 43 depends on X86 && DMI 44 help 45 If you say yes here you get support for the sensor part of the first 46 and second revision of the Abit uGuru chip. The voltage and frequency 47 control parts of the Abit uGuru are not supported. The Abit uGuru 48 chip can be found on Abit uGuru featuring motherboards (most modern 49 Abit motherboards from before end 2005). For more info and a list 50 of which motherboards have which revision see 51 Documentation/hwmon/abituguru.rst 52 53 This driver can also be built as a module. If so, the module 54 will be called abituguru. 55 56 config SENSORS_ABITUGURU3 57 tristate "Abit uGuru (rev 3)" 58 depends on X86 && DMI 59 help 60 If you say yes here you get support for the sensor part of the 61 third revision of the Abit uGuru chip. Only reading the sensors 62 and their settings is supported. The third revision of the Abit 63 uGuru chip can be found on recent Abit motherboards (since end 64 2005). For more info and a list of which motherboards have which 65 revision see Documentation/hwmon/abituguru3.rst 66 67 This driver can also be built as a module. If so, the module 68 will be called abituguru3. 69 70 config SENSORS_SMPRO 71 tristate "Ampere's Altra SMpro hardware monitoring driver" 72 depends on MFD_SMPRO 73 help 74 If you say yes here you get support for the thermal, voltage, 75 current and power sensors of Ampere's Altra processor family SoC 76 with SMpro co-processor. 77 78 config SENSORS_AD7314 79 tristate "Analog Devices AD7314 and compatibles" 80 depends on SPI 81 help 82 If you say yes here you get support for the Analog Devices 83 AD7314, ADT7301 and ADT7302 temperature sensors. 84 85 This driver can also be built as a module. If so, the module 86 will be called ad7314. 87 88 config SENSORS_AD7414 89 tristate "Analog Devices AD7414" 90 depends on I2C 91 help 92 If you say yes here you get support for the Analog Devices 93 AD7414 temperature monitoring chip. 94 95 This driver can also be built as a module. If so, the module 96 will be called ad7414. 97 98 config SENSORS_AD7418 99 tristate "Analog Devices AD7416, AD7417 and AD7418" 100 depends on I2C 101 help 102 If you say yes here you get support for the Analog Devices 103 AD7416, AD7417 and AD7418 temperature monitoring chips. 104 105 This driver can also be built as a module. If so, the module 106 will be called ad7418. 107 108 config SENSORS_ADM1021 109 tristate "Analog Devices ADM1021 and compatibles" 110 depends on I2C 111 depends on SENSORS_LM90=n 112 help 113 If you say yes here you get support for Analog Devices ADM1021 114 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, 115 Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10. 116 117 This driver can also be built as a module. If so, the module 118 will be called adm1021. 119 120 config SENSORS_ADM1025 121 tristate "Analog Devices ADM1025 and compatibles" 122 depends on I2C 123 select HWMON_VID 124 help 125 If you say yes here you get support for Analog Devices ADM1025 126 and Philips NE1619 sensor chips. 127 128 This driver can also be built as a module. If so, the module 129 will be called adm1025. 130 131 config SENSORS_ADM1026 132 tristate "Analog Devices ADM1026 and compatibles" 133 depends on I2C 134 select HWMON_VID 135 help 136 If you say yes here you get support for Analog Devices ADM1026 137 sensor chip. 138 139 This driver can also be built as a module. If so, the module 140 will be called adm1026. 141 142 config SENSORS_ADM1029 143 tristate "Analog Devices ADM1029" 144 depends on I2C 145 help 146 If you say yes here you get support for Analog Devices ADM1029 147 sensor chip. 148 Very rare chip, please let us know you use it. 149 150 This driver can also be built as a module. If so, the module 151 will be called adm1029. 152 153 config SENSORS_ADM1031 154 tristate "Analog Devices ADM1031 and compatibles" 155 depends on I2C 156 help 157 If you say yes here you get support for Analog Devices ADM1031 158 and ADM1030 sensor chips. 159 160 This driver can also be built as a module. If so, the module 161 will be called adm1031. 162 163 config SENSORS_ADM1177 164 tristate "Analog Devices ADM1177 and compatibles" 165 depends on I2C 166 help 167 If you say yes here you get support for Analog Devices ADM1177 168 sensor chips. 169 170 This driver can also be built as a module. If so, the module 171 will be called adm1177. 172 173 config SENSORS_ADM9240 174 tristate "Analog Devices ADM9240 and compatibles" 175 depends on I2C 176 select HWMON_VID 177 help 178 If you say yes here you get support for Analog Devices ADM9240, 179 Dallas DS1780, National Semiconductor LM81 sensor chips. 180 181 This driver can also be built as a module. If so, the module 182 will be called adm9240. 183 184 config SENSORS_ADT7X10 185 tristate 186 select REGMAP 187 help 188 This module contains common code shared by the ADT7310/ADT7320 and 189 ADT7410/ADT7420 temperature monitoring chip drivers. 190 191 If built as a module, the module will be called adt7x10. 192 193 config SENSORS_ADT7310 194 tristate "Analog Devices ADT7310/ADT7320" 195 depends on SPI_MASTER 196 select SENSORS_ADT7X10 197 help 198 If you say yes here you get support for the Analog Devices 199 ADT7310 and ADT7320 temperature monitoring chips. 200 201 This driver can also be built as a module. If so, the module 202 will be called adt7310. 203 204 config SENSORS_ADT7410 205 tristate "Analog Devices ADT7410/ADT7420" 206 depends on I2C 207 select SENSORS_ADT7X10 208 help 209 If you say yes here you get support for the Analog Devices 210 ADT7410 and ADT7420 temperature monitoring chips. 211 212 This driver can also be built as a module. If so, the module 213 will be called adt7410. 214 215 config SENSORS_ADT7411 216 tristate "Analog Devices ADT7411" 217 depends on I2C 218 help 219 If you say yes here you get support for the Analog Devices 220 ADT7411 voltage and temperature monitoring chip. 221 222 This driver can also be built as a module. If so, the module 223 will be called adt7411. 224 225 config SENSORS_ADT7462 226 tristate "Analog Devices ADT7462" 227 depends on I2C 228 help 229 If you say yes here you get support for the Analog Devices 230 ADT7462 temperature monitoring chips. 231 232 This driver can also be built as a module. If so, the module 233 will be called adt7462. 234 235 config SENSORS_ADT7470 236 tristate "Analog Devices ADT7470" 237 depends on I2C 238 help 239 If you say yes here you get support for the Analog Devices 240 ADT7470 temperature monitoring chips. 241 242 This driver can also be built as a module. If so, the module 243 will be called adt7470. 244 245 config SENSORS_ADT7475 246 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" 247 depends on I2C 248 select HWMON_VID 249 help 250 If you say yes here you get support for the Analog Devices 251 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring 252 chips. 253 254 This driver can also be built as a module. If so, the module 255 will be called adt7475. 256 257 config SENSORS_AHT10 258 tristate "Aosong AHT10, AHT20" 259 depends on I2C 260 select CRC8 261 help 262 If you say yes here, you get support for the Aosong AHT10 and AHT20 263 temperature and humidity sensors 264 265 This driver can also be built as a module. If so, the module 266 will be called aht10. 267 268 config SENSORS_AQUACOMPUTER_D5NEXT 269 tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, Farbwerk 360, High Flow Next" 270 depends on USB_HID 271 select CRC16 272 help 273 If you say yes here you get support for sensors and fans of 274 the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan 275 controllers, Farbwerk and Farbwerk 360 RGB controllers, High Flow 276 Next sensor, where available. 277 278 This driver can also be built as a module. If so, the module 279 will be called aquacomputer_d5next. 280 281 config SENSORS_AS370 282 tristate "Synaptics AS370 SoC hardware monitoring driver" 283 help 284 If you say yes here you get support for the PVT sensors of 285 the Synaptics AS370 SoC 286 287 This driver can also be built as a module. If so, the module 288 will be called as370-hwmon. 289 290 291 config SENSORS_ASC7621 292 tristate "Andigilog aSC7621" 293 depends on I2C 294 help 295 If you say yes here you get support for the aSC7621 296 family of SMBus sensors chip found on most Intel X38, X48, X58, 297 945, 965 and 975 desktop boards. Currently supported chips: 298 aSC7621 299 aSC7621a 300 301 This driver can also be built as a module. If so, the module 302 will be called asc7621. 303 304 config SENSORS_AXI_FAN_CONTROL 305 tristate "Analog Devices FAN Control HDL Core driver" 306 help 307 If you say yes here you get support for the Analog Devices 308 AXI HDL FAN monitoring core. 309 310 This driver can also be built as a module. If so, the module 311 will be called axi-fan-control 312 313 config SENSORS_K8TEMP 314 tristate "AMD Athlon64/FX or Opteron temperature sensor" 315 depends on X86 && PCI 316 help 317 If you say yes here you get support for the temperature 318 sensor(s) inside your CPU. Supported is whole AMD K8 319 microarchitecture. Please note that you will need at least 320 lm-sensors 2.10.1 for proper userspace support. 321 322 This driver can also be built as a module. If so, the module 323 will be called k8temp. 324 325 config SENSORS_K10TEMP 326 tristate "AMD Family 10h+ temperature sensor" 327 depends on X86 && PCI && AMD_NB 328 help 329 If you say yes here you get support for the temperature 330 sensor(s) inside your CPU. Supported are later revisions of 331 the AMD Family 10h and all revisions of the AMD Family 11h, 332 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo) 333 and 16h (Kabini/Mullins) microarchitectures. 334 335 This driver can also be built as a module. If so, the module 336 will be called k10temp. 337 338 config SENSORS_FAM15H_POWER 339 tristate "AMD Family 15h processor power" 340 depends on X86 && PCI && CPU_SUP_AMD 341 help 342 If you say yes here you get support for processor power 343 information of your AMD family 15h CPU. 344 345 This driver can also be built as a module. If so, the module 346 will be called fam15h_power. 347 348 config SENSORS_APPLESMC 349 tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" 350 depends on INPUT && X86 351 select NEW_LEDS 352 select LEDS_CLASS 353 help 354 This driver provides support for the Apple System Management 355 Controller, which provides an accelerometer (Apple Sudden Motion 356 Sensor), light sensors, temperature sensors, keyboard backlight 357 control and fan control. 358 359 Only Intel-based Apple's computers are supported (MacBook Pro, 360 MacBook, MacMini). 361 362 Data from the different sensors, keyboard backlight control and fan 363 control are accessible via sysfs. 364 365 This driver also provides an absolute input class device, allowing 366 the laptop to act as a pinball machine-esque joystick. 367 368 Say Y here if you have an applicable laptop and want to experience 369 the awesome power of applesmc. 370 371 config SENSORS_ARM_SCMI 372 tristate "ARM SCMI Sensors" 373 depends on ARM_SCMI_PROTOCOL 374 depends on THERMAL || !THERMAL_OF 375 help 376 This driver provides support for temperature, voltage, current 377 and power sensors available on SCMI based platforms. The actual 378 number and type of sensors exported depend on the platform. 379 380 This driver can also be built as a module. If so, the module 381 will be called scmi-hwmon. 382 383 config SENSORS_ARM_SCPI 384 tristate "ARM SCPI Sensors" 385 depends on ARM_SCPI_PROTOCOL 386 depends on THERMAL || !THERMAL_OF 387 help 388 This driver provides support for temperature, voltage, current 389 and power sensors available on ARM Ltd's SCP based platforms. The 390 actual number and type of sensors exported depend on the platform. 391 392 config SENSORS_ASB100 393 tristate "Asus ASB100 Bach" 394 depends on (X86 || COMPILE_TEST) && I2C 395 select HWMON_VID 396 help 397 If you say yes here you get support for the ASB100 Bach sensor 398 chip found on some Asus mainboards. 399 400 This driver can also be built as a module. If so, the module 401 will be called asb100. 402 403 config SENSORS_ASPEED 404 tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver" 405 depends on ARCH_ASPEED || COMPILE_TEST 406 depends on THERMAL || THERMAL=n 407 select REGMAP 408 help 409 This driver provides support for ASPEED AST2400/AST2500 PWM 410 and Fan Tacho controllers. 411 412 This driver can also be built as a module. If so, the module 413 will be called aspeed_pwm_tacho. 414 415 config SENSORS_ATXP1 416 tristate "Attansic ATXP1 VID controller" 417 depends on I2C 418 select HWMON_VID 419 help 420 If you say yes here you get support for the Attansic ATXP1 VID 421 controller. 422 423 If your board have such a chip, you are able to control your CPU 424 core and other voltages. 425 426 This driver can also be built as a module. If so, the module 427 will be called atxp1. 428 429 config SENSORS_BT1_PVT 430 tristate "Baikal-T1 Process, Voltage, Temperature sensor driver" 431 depends on MIPS_BAIKAL_T1 || COMPILE_TEST 432 select POLYNOMIAL 433 help 434 If you say yes here you get support for Baikal-T1 PVT sensor 435 embedded into the SoC. 436 437 This driver can also be built as a module. If so, the module will be 438 called bt1-pvt. 439 440 config SENSORS_BT1_PVT_ALARMS 441 bool "Enable Baikal-T1 PVT sensor alarms" 442 depends on SENSORS_BT1_PVT 443 help 444 Baikal-T1 PVT IP-block provides threshold registers for each 445 supported sensor. But the corresponding interrupts might be 446 generated by the thresholds comparator only in synchronization with 447 a data conversion. Additionally there is only one sensor data can 448 be converted at a time. All of these makes the interface impossible 449 to be used for the hwmon alarms implementation without periodic 450 switch between the PVT sensors. By default the data conversion is 451 performed on demand from the user-space. If this config is enabled 452 the data conversion will be periodically performed and the data will be 453 saved in the internal driver cache. 454 455 config SENSORS_CORSAIR_CPRO 456 tristate "Corsair Commander Pro controller" 457 depends on HID 458 help 459 If you say yes here you get support for the Corsair Commander Pro 460 controller. 461 462 This driver can also be built as a module. If so, the module 463 will be called corsair-cpro. 464 465 config SENSORS_CORSAIR_PSU 466 tristate "Corsair PSU HID controller" 467 depends on HID 468 help 469 If you say yes here you get support for Corsair PSUs with a HID 470 interface. 471 Currently this driver supports the (RM/HX)550i, (RM/HX)650i, 472 (RM/HX)750i, (RM/HX)850i, (RM/HX)1000i and HX1200i power supplies 473 by Corsair. 474 475 This driver can also be built as a module. If so, the module 476 will be called corsair-psu. 477 478 config SENSORS_DRIVETEMP 479 tristate "Hard disk drives with temperature sensors" 480 depends on SCSI && ATA 481 help 482 If you say yes you get support for the temperature sensor on 483 hard disk drives. 484 485 This driver can also be built as a module. If so, the module 486 will be called drivetemp. 487 488 config SENSORS_DS620 489 tristate "Dallas Semiconductor DS620" 490 depends on I2C 491 help 492 If you say yes here you get support for Dallas Semiconductor 493 DS620 sensor chip. 494 495 This driver can also be built as a module. If so, the module 496 will be called ds620. 497 498 config SENSORS_DS1621 499 tristate "Dallas Semiconductor DS1621 and compatibles" 500 depends on I2C 501 help 502 If you say yes here you get support for Dallas Semiconductor/Maxim 503 Integrated DS1621 sensor chips and compatible models including: 504 505 - Dallas Semiconductor DS1625 506 - Maxim Integrated DS1631 507 - Maxim Integrated DS1721 508 - Maxim Integrated DS1731 509 510 This driver can also be built as a module. If so, the module 511 will be called ds1621. 512 513 config SENSORS_DELL_SMM 514 tristate "Dell laptop SMM BIOS hwmon driver" 515 depends on X86 516 imply THERMAL 517 help 518 This hwmon driver adds support for reporting temperature of different 519 sensors and controls the fans on Dell laptops via System Management 520 Mode provided by Dell BIOS. 521 522 When option I8K is also enabled this driver provides legacy /proc/i8k 523 userspace interface for i8kutils package. 524 525 config I8K 526 bool "Legacy /proc/i8k interface of Dell laptop SMM BIOS hwmon driver" 527 depends on SENSORS_DELL_SMM 528 depends on PROC_FS 529 help 530 This option enables the legacy /proc/i8k userspace interface of the 531 dell-smm-hwmon driver. The character file /proc/i8k exposes the BIOS 532 version, temperatures and allows control of fan speeds of some Dell 533 laptops. Sometimes it also reports power and hotkey status. 534 535 This interface is required to run programs from the i8kutils package. 536 537 Say Y if you intend to run userspace programs that use this interface. 538 Say N otherwise. 539 540 config SENSORS_DA9052_ADC 541 tristate "Dialog DA9052/DA9053 ADC" 542 depends on PMIC_DA9052 543 help 544 Say y here to support the ADC found on Dialog Semiconductor 545 DA9052-BC and DA9053-AA/Bx PMICs. 546 547 This driver can also be built as module. If so, the module 548 will be called da9052-hwmon. 549 550 config SENSORS_DA9055 551 tristate "Dialog Semiconductor DA9055 ADC" 552 depends on MFD_DA9055 553 help 554 If you say yes here you get support for ADC on the Dialog 555 Semiconductor DA9055 PMIC. 556 557 This driver can also be built as a module. If so, the module 558 will be called da9055-hwmon. 559 560 config SENSORS_I5K_AMB 561 tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" 562 depends on PCI 563 help 564 If you say yes here you get support for FB-DIMM AMB temperature 565 monitoring chips on systems with the Intel 5000 series chipset. 566 567 This driver can also be built as a module. If so, the module 568 will be called i5k_amb. 569 570 config SENSORS_SPARX5 571 tristate "Sparx5 SoC temperature sensor" 572 depends on ARCH_SPARX5 || COMPILE_TEST 573 help 574 If you say yes here you get support for temperature monitoring 575 with the Microchip Sparx5 SoC. 576 577 This driver can also be built as a module. If so, the module 578 will be called sparx5-temp. 579 580 config SENSORS_F71805F 581 tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" 582 depends on !PPC 583 help 584 If you say yes here you get support for hardware monitoring 585 features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG 586 Super-I/O chips. 587 588 This driver can also be built as a module. If so, the module 589 will be called f71805f. 590 591 config SENSORS_F71882FG 592 tristate "Fintek F71882FG and compatibles" 593 depends on !PPC 594 help 595 If you say yes here you get support for hardware monitoring 596 features of many Fintek Super-I/O (LPC) chips. The currently 597 supported chips are: 598 F71808E/A 599 F71858FG 600 F71862FG 601 F71863FG 602 F71869F/E/A 603 F71882FG 604 F71883FG 605 F71889FG/ED/A 606 F8000 607 F81801U 608 F81865F 609 610 This driver can also be built as a module. If so, the module 611 will be called f71882fg. 612 613 config SENSORS_F75375S 614 tristate "Fintek F75375S/SP, F75373 and F75387" 615 depends on I2C 616 help 617 If you say yes here you get support for hardware monitoring 618 features of the Fintek F75375S/SP, F75373 and F75387 619 620 This driver can also be built as a module. If so, the module 621 will be called f75375s. 622 623 config SENSORS_GSC 624 tristate "Gateworks System Controller ADC" 625 depends on MFD_GATEWORKS_GSC 626 help 627 Support for the Gateworks System Controller A/D converters. 628 629 To compile this driver as a module, choose M here: 630 the module will be called gsc-hwmon. 631 632 config SENSORS_MC13783_ADC 633 tristate "Freescale MC13783/MC13892 ADC" 634 depends on MFD_MC13XXX 635 help 636 Support for the A/D converter on MC13783 and MC13892 PMIC. 637 638 config SENSORS_FSCHMD 639 tristate "Fujitsu Siemens Computers sensor chips" 640 depends on (X86 || COMPILE_TEST) && I2C 641 help 642 If you say yes here you get support for the following Fujitsu 643 Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, 644 Heimdall, Heracles, Hades and Syleus including support for the 645 integrated watchdog. 646 647 This is a merged driver for FSC sensor chips replacing the fscpos, 648 fscscy and fscher drivers and adding support for several other FSC 649 sensor chips. 650 651 This driver can also be built as a module. If so, the module 652 will be called fschmd. 653 654 config SENSORS_FTSTEUTATES 655 tristate "Fujitsu Technology Solutions sensor chip Teutates" 656 depends on I2C && WATCHDOG 657 select WATCHDOG_CORE 658 help 659 If you say yes here you get support for the Fujitsu Technology 660 Solutions (FTS) sensor chip "Teutates" including support for 661 the integrated watchdog. 662 663 This driver can also be built as a module. If so, the module 664 will be called ftsteutates. 665 666 config SENSORS_GL518SM 667 tristate "Genesys Logic GL518SM" 668 depends on I2C 669 help 670 If you say yes here you get support for Genesys Logic GL518SM 671 sensor chips. 672 673 This driver can also be built as a module. If so, the module 674 will be called gl518sm. 675 676 config SENSORS_GL520SM 677 tristate "Genesys Logic GL520SM" 678 depends on I2C 679 select HWMON_VID 680 help 681 If you say yes here you get support for Genesys Logic GL520SM 682 sensor chips. 683 684 This driver can also be built as a module. If so, the module 685 will be called gl520sm. 686 687 config SENSORS_G760A 688 tristate "GMT G760A" 689 depends on I2C 690 help 691 If you say yes here you get support for Global Mixed-mode 692 Technology Inc G760A fan speed PWM controller chips. 693 694 This driver can also be built as a module. If so, the module 695 will be called g760a. 696 697 config SENSORS_G762 698 tristate "GMT G762 and G763" 699 depends on I2C 700 help 701 If you say yes here you get support for Global Mixed-mode 702 Technology Inc G762 and G763 fan speed PWM controller chips. 703 704 This driver can also be built as a module. If so, the module 705 will be called g762. 706 707 config SENSORS_GPIO_FAN 708 tristate "GPIO fan" 709 depends on OF_GPIO 710 depends on GPIOLIB || COMPILE_TEST 711 depends on THERMAL || THERMAL=n 712 help 713 If you say yes here you get support for fans connected to GPIO lines. 714 715 This driver can also be built as a module. If so, the module 716 will be called gpio-fan. 717 718 config SENSORS_GXP_FAN_CTRL 719 tristate "HPE GXP fan controller" 720 depends on ARCH_HPE_GXP || COMPILE_TEST 721 help 722 If you say yes here you get support for GXP fan control functionality. 723 724 The GXP controls fan function via the CPLD through the use of PWM 725 registers. This driver reports status and pwm setting of the fans. 726 727 config SENSORS_HIH6130 728 tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor" 729 depends on I2C 730 help 731 If you say yes here you get support for Honeywell Humidicon 732 HIH-6130 and HIH-6131 Humidicon humidity sensors. 733 734 This driver can also be built as a module. If so, the module 735 will be called hih6130. 736 737 config SENSORS_HS3001 738 tristate "Renesas HS3001 humidity and temperature sensors" 739 depends on I2C 740 help 741 If you say yes here you get support for the Renesas HS3001, 742 to HS3004 humidity and temperature sensors. 743 744 This driver can also be built as a module. If so, the module 745 will be called hs3001. 746 747 config SENSORS_IBMAEM 748 tristate "IBM Active Energy Manager temperature/power sensors and control" 749 select IPMI_SI 750 depends on IPMI_HANDLER 751 help 752 If you say yes here you get support for the temperature and 753 power sensors and capping hardware in various IBM System X 754 servers that support Active Energy Manager. This includes 755 the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, 756 and certain HC10/HS2x/LS2x/QS2x blades. 757 758 This driver can also be built as a module. If so, the module 759 will be called ibmaem. 760 761 config SENSORS_IBMPEX 762 tristate "IBM PowerExecutive temperature/power sensors" 763 select IPMI_SI 764 depends on IPMI_HANDLER 765 help 766 If you say yes here you get support for the temperature and 767 power sensors in various IBM System X servers that support 768 PowerExecutive. So far this includes the x3350, x3550, x3650, 769 x3655, and x3755; the x3800, x3850, and x3950 models that have 770 PCI Express; and some of the HS2x, LS2x, and QS2x blades. 771 772 This driver can also be built as a module. If so, the module 773 will be called ibmpex. 774 775 config SENSORS_IBMPOWERNV 776 tristate "IBM POWERNV platform sensors" 777 depends on PPC_POWERNV 778 default y 779 help 780 If you say yes here you get support for the temperature/fan/power 781 sensors on your PowerNV platform. 782 783 This driver can also be built as a module. If so, the module 784 will be called ibmpowernv. 785 786 config SENSORS_IIO_HWMON 787 tristate "Hwmon driver that uses channels specified via iio maps" 788 depends on IIO 789 help 790 This is a platform driver that in combination with a suitable 791 map allows IIO devices to provide basic hwmon functionality 792 for those channels specified in the map. This map can be provided 793 either via platform data or the device tree bindings. 794 795 config SENSORS_I5500 796 tristate "Intel 5500/5520/X58 temperature sensor" 797 depends on X86 && PCI 798 help 799 If you say yes here you get support for the temperature 800 sensor inside the Intel 5500, 5520 and X58 chipsets. 801 802 This driver can also be built as a module. If so, the module 803 will be called i5500_temp. 804 805 config SENSORS_CORETEMP 806 tristate "Intel Core/Core2/Atom temperature sensor" 807 depends on X86 808 help 809 If you say yes here you get support for the temperature 810 sensor inside your CPU. Most of the family 6 CPUs 811 are supported. Check Documentation/hwmon/coretemp.rst for details. 812 813 config SENSORS_IT87 814 tristate "ITE IT87xx and compatibles" 815 depends on !PPC 816 select HWMON_VID 817 help 818 If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F, 819 IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E, 820 IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, 821 IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950 822 clone. 823 824 This driver can also be built as a module. If so, the module 825 will be called it87. 826 827 config SENSORS_JC42 828 tristate "JEDEC JC42.4 compliant memory module temperature sensors" 829 depends on I2C 830 select REGMAP_I2C 831 help 832 If you say yes here, you get support for JEDEC JC42.4 compliant 833 temperature sensors, which are used on many DDR3 memory modules for 834 mobile devices and servers. Support will include, but not be limited 835 to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805, 836 MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, 837 STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001. 838 839 This driver can also be built as a module. If so, the module 840 will be called jc42. 841 842 config SENSORS_POWERZ 843 tristate "ChargerLAB POWER-Z USB-C tester"); > 844 depends on USB 845 help 846 If you say yes here you get support for ChargerLAB POWER-Z series of 847 USB-C charging testers. 848 849 This driver can also be built as a module. If so, the module 850 will be called powerz. 851 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
