Ilpo,
See my comments below.
Thanks.
Henry
-----Original Message-----
From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
Sent: Thursday, August 17, 2023 4:07 AM
To: Henry Shi <henryshi2018@xxxxxxxxx>
Cc: hbshi69@xxxxxxxxxxx; tglx@xxxxxxxxxxxxx; mingo@xxxxxxxxxx; bp@xxxxxxxxx; dave.hansen@xxxxxxxxxxxxxxx; x86@xxxxxxxxxx; hpa@xxxxxxxxx; hdegoede@xxxxxxxxxx; markgross@xxxxxxxxxx; jdelvare@xxxxxxxx; linux@xxxxxxxxxxxx; LKML <linux-kernel@xxxxxxxxxxxxxxx>; platform-driver-x86@xxxxxxxxxxxxxxx; linux-hwmon@xxxxxxxxxxxxxxx; hb_shi2003@xxxxxxxxx; Huibin Shi <henrys@xxxxxxxxxxxxxxx>; Wen Wang <wenw@xxxxxxxxxxxxxxx>
Subject: Re: [PATCH] Add Silicom Platform Driver
Caution: This is an external email. Please take care when clicking links or opening attachments.
On Tue, 15 Aug 2023, Henry Shi wrote:
> The Silicom platform (silicom-platform) Linux driver for Swisscom
> Business Box (Swisscom BB) as well as Cordoba family products is a
> software solution designed to facilitate the efficient management and
> control of devices through the integration of various Linux
> frameworks. This platform driver provides seamless support for device
> management via the Linux LED framework, GPIO framework, Hardware
> Monitoring (HWMON), and device attributes. The Silicom platform
> driver's compatibility with these Linux frameworks allows applications
> to access and control Cordoba family devices using existing software
> that is compatible with these frameworks. This compatibility
> simplifies the development process, reduces dependencies on
> proprietary solutions, and promotes interoperability with other
> Linux-based systems and software.
>
> Signed-off-by: Henry Shi <henryshi2018@xxxxxxxxx>
> ---
You should use version the submission (vXX should appear already in the
subject) and provide the version history in a list (listing version to version changes).
Henry: OK.
> drivers/platform/x86/Kconfig | 11 +
> drivers/platform/x86/Makefile | 1 +
> drivers/platform/x86/silicom-platform.c | 1053
> +++++++++++++++++++++++
> 3 files changed, 1065 insertions(+)
> create mode 100644 drivers/platform/x86/silicom-platform.c
>
> diff --git a/drivers/platform/x86/Kconfig
> b/drivers/platform/x86/Kconfig index 22052031c719..7680c0dbcd8d 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -188,6 +188,17 @@ config ACER_WMI
> If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
> here.
>
> +config SILICOM_PLATFORM
> + tristate "Silicom Edge Networking device support"
> + depends on DMI
> + select LEDS_CLASS_MULTICOLOR
> + select GPIOLIB
> + help
> + This option enables support for the LEDs/GPIO/etc downstream of the
> + embedded controller on Silicom "Cordoba" hardware and derivatives.
> +
> + If you have a Silicom network appliance, say Y or M here.
> +
> source "drivers/platform/x86/amd/Kconfig"
>
> config ADV_SWBUTTON
> diff --git a/drivers/platform/x86/Makefile
> b/drivers/platform/x86/Makefile index 2cafe51ec4d8..9355ebbc56ca
> 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -113,6 +113,7 @@ obj-$(CONFIG_SERIAL_MULTI_INSTANTIATE) += serial-multi-instantiate.o
> obj-$(CONFIG_MLX_PLATFORM) += mlx-platform.o
> obj-$(CONFIG_TOUCHSCREEN_DMI) += touchscreen_dmi.o
> obj-$(CONFIG_WIRELESS_HOTKEY) += wireless-hotkey.o
> +obj-$(CONFIG_SILICOM_PLATFORM) += silicom-platform.o
> obj-$(CONFIG_X86_ANDROID_TABLETS) += x86-android-tablets/
>
> # Intel uncore drivers
> diff --git a/drivers/platform/x86/silicom-platform.c
> b/drivers/platform/x86/silicom-platform.c
> new file mode 100644
> index 000000000000..f8d1eb68b105
> --- /dev/null
> +++ b/drivers/platform/x86/silicom-platform.c
> @@ -0,0 +1,1053 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +//
> +// silicom-platform.c - Silicom MEC170x platform driver // //
> +Copyright (C) 2023 Henry Shi <henrys@xxxxxxxxxxxxxxx>
> +
> +#include <linux/dmi.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/init.h>
> +#include <linux/ioport.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/led-class-multicolor.h> #include <linux/module.h>
> +#include <linux/hwmon.h> #include <linux/mutex.h> #include
> +<linux/platform_device.h> #include <linux/string.h> #include
> +<linux/kobject.h> #include <linux/sysfs.h> #include <linux/bits.h>
> +#include <linux/bitfield.h>
> +
> +#define MEC_ADDR ((mec_io_base) + 0x02) #define MEC_DATA(offset)
> +((mec_io_base) + 0x04 + (offset)) #define EC_ADDR_LSB MEC_ADDR
> +#define EC_ADDR_MSB ((mec_io_base) + 0x03) #define SILICOM_MEC_MAGIC
> +0x5a #define OFFSET_BIT_TO_CHANNEL(off, bit) ((((off) + 0x014) << 3)
> +| (bit)) #define CHANNEL_TO_OFFSET(chan) (((chan) >> 3) - 0x14)
> +#define IO_REG_BANK 0 #define DEFAULT_CHAN_LO 0 #define
> +DEFAULT_CHAN_HI 0
> +
> +static DEFINE_MUTEX(mec_io_mutex);
> +static int mec_io_base, mec_io_len;
> +static struct device *my_dev;
> +static int efuse_status;
> +static int mec_uc_version;
> +static int power_cycle;
> +
> +struct silicom_fan_control_data {
> + struct device *hdev;
> + int temp;
> + int fan_speed;
> +};
> +
> +static const struct hwmon_channel_info *silicom_fan_control_info[] = {
> + HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_LABEL),
> + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_LABEL),
> + NULL
> +};
> +
> +struct silicom_platform_info {
> + int io_base;
> + int io_len;
> + struct led_classdev_mc *led_info;
> + struct gpio_chip *gpiochip;
> + u8 *gpio_channels;
> + u16 ngpio;
> +};
> +
> +static const char * const plat_0222_gpio_names[] = {
> + "AUTOM0_SFP_TX_FAULT",
> + "SLOT2_LED_OUT",
> + "SIM_M2_SLOT2_B_DET",
> + "SIM_M2_SLOT2_A_DET",
> + "SLOT1_LED_OUT",
> + "SIM_M2_SLOT1_B_DET",
> + "SIM_M2_SLOT1_A_DET",
> + "SLOT0_LED_OUT",
> + "WAN_SFP0_RX_LOS",
> + "WAN_SFP0_PRSNT_N",
> + "WAN_SFP0_TX_FAULT",
> + "AUTOM1_SFP_RX_LOS",
> + "AUTOM1_SFP_PRSNT_N",
> + "AUTOM1_SFP_TX_FAULT",
> + "AUTOM0_SFP_RX_LOS",
> + "AUTOM0_SFP_PRSNT_N",
> + "WAN_SFP1_RX_LOS",
> + "WAN_SFP1_PRSNT_N",
> + "WAN_SFP1_TX_FAULT",
> + "SIM_M2_SLOT1_MUX_SEL",
> + "W_DISABLE_M2_SLOT1_N",
> + "W_DISABLE_MPCIE_SLOT0_N",
> + "W_DISABLE_M2_SLOT0_N",
> + "BT_COMMAND_MODE",
> + "WAN_SFP1_TX_DISABLE",
> + "WAN_SFP0_TX_DISABLE",
> + "AUTOM1_SFP_TX_DISABLE",
> + "AUTOM0_SFP_TX_DISABLE",
> + "SIM_M2_SLOT2_MUX_SEL",
> + "W_DISABLE_M2_SLOT2_N",
> + "RST_CTL_M2_SLOT_1_N",
> + "RST_CTL_M2_SLOT_2_N",
> + "PM_USB_PWR_EN_BOT",
> + "PM_USB_PWR_EN_TOP",
> +};
> +
> +static u8 plat_0222_gpio_channels[] = {
> + OFFSET_BIT_TO_CHANNEL(0x00, 0),
> + OFFSET_BIT_TO_CHANNEL(0x00, 1),
> + OFFSET_BIT_TO_CHANNEL(0x00, 2),
> + OFFSET_BIT_TO_CHANNEL(0x00, 3),
> + OFFSET_BIT_TO_CHANNEL(0x00, 4),
> + OFFSET_BIT_TO_CHANNEL(0x00, 5),
> + OFFSET_BIT_TO_CHANNEL(0x00, 6),
> + OFFSET_BIT_TO_CHANNEL(0x00, 7),
> + OFFSET_BIT_TO_CHANNEL(0x01, 0),
> + OFFSET_BIT_TO_CHANNEL(0x01, 1),
> + OFFSET_BIT_TO_CHANNEL(0x01, 2),
> + OFFSET_BIT_TO_CHANNEL(0x01, 3),
> + OFFSET_BIT_TO_CHANNEL(0x01, 4),
> + OFFSET_BIT_TO_CHANNEL(0x01, 5),
> + OFFSET_BIT_TO_CHANNEL(0x01, 6),
> + OFFSET_BIT_TO_CHANNEL(0x01, 7),
> + OFFSET_BIT_TO_CHANNEL(0x02, 0),
> + OFFSET_BIT_TO_CHANNEL(0x02, 1),
> + OFFSET_BIT_TO_CHANNEL(0x02, 2),
> + OFFSET_BIT_TO_CHANNEL(0x09, 0),
> + OFFSET_BIT_TO_CHANNEL(0x09, 1),
> + OFFSET_BIT_TO_CHANNEL(0x09, 2),
> + OFFSET_BIT_TO_CHANNEL(0x09, 3),
> + OFFSET_BIT_TO_CHANNEL(0x0a, 0),
> + OFFSET_BIT_TO_CHANNEL(0x0a, 1),
> + OFFSET_BIT_TO_CHANNEL(0x0a, 2),
> + OFFSET_BIT_TO_CHANNEL(0x0a, 3),
> + OFFSET_BIT_TO_CHANNEL(0x0a, 4),
> + OFFSET_BIT_TO_CHANNEL(0x0a, 5),
> + OFFSET_BIT_TO_CHANNEL(0x0a, 6),
> + OFFSET_BIT_TO_CHANNEL(0x0b, 0),
> + OFFSET_BIT_TO_CHANNEL(0x0b, 1),
> + OFFSET_BIT_TO_CHANNEL(0x0b, 2),
> + OFFSET_BIT_TO_CHANNEL(0x0b, 3),
> +};
> +
> +static struct platform_device *silicom_platform_dev; static struct
> +led_classdev_mc *silicom_led_info __initdata; static struct gpio_chip
> +*silicom_gpiochip __initdata; static u8 *silicom_gpio_channels
> +__initdata;
> +
> +static int silicom_mec_port_get(unsigned int offset) {
> + u8 reg;
> +
> + mutex_lock(&mec_io_mutex);
> + /* Get the dword offset from the channel */
> + outb((offset >> 3) & 0xfc, MEC_ADDR);
> +
> + /* Get the current register */
> + reg = inb(MEC_DATA((offset >> 3) & 0x03));
> + mutex_unlock(&mec_io_mutex);
> +
> + return (reg >> (offset & 0x7)) & 0x01; }
> +
> +static enum led_brightness silicom_mec_led_get(int channel) {
> + u8 reg;
> +
> + mutex_lock(&mec_io_mutex);
> + /* Get the dword offset of the register for this LED from the channel */
> + outb((channel >> 3) & 0xfc, MEC_ADDR);
> + /* Get the current LED settings */
> + reg = inb(MEC_DATA((channel >> 3) & 0x03));
> + mutex_unlock(&mec_io_mutex);
> +
> + /* Outputs are active low */
> + return silicom_mec_port_get(channel) ? LED_OFF : LED_ON;
Why is code now done twice, first in this function and then it calls
silicom_mec_port_get() which does the same thing?? Perhaps you forgot to remove it from this function while you added the call.
Henry: Yes, those lines should be removed.
> +}
> +
> +static void silicom_mec_port_set(int channel, int on) {
> + u8 reg;
> +
> + mutex_lock(&mec_io_mutex);
> + /* Get the dword offset from the channel */
> + outb((channel >> 3) & 0xfc, MEC_ADDR);
> + /* Get the current port settings */
> + reg = inb(MEC_DATA((channel >> 3) & 0x03));
> + /* Outputs are active low, so clear the bit for on, or set it for off */
> + if (on)
> + reg &= ~(1 << (channel & 0x7));
> + else
> + reg |= 1 << (channel & 0x7);
> + /* Write back the updated register */
> + outb(reg, MEC_DATA((channel >> 3) & 0x03));
> + mutex_unlock(&mec_io_mutex);
> +}
> +
> +static enum led_brightness silicom_mec_led_mc_brightness_get(struct
> +led_classdev *led_cdev) {
> + struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(led_cdev);
> + enum led_brightness brightness = LED_OFF;
> + int i;
> +
> + for (i = 0; i < mc_cdev->num_colors; i++) {
> + mc_cdev->subled_info[i].brightness =
> + silicom_mec_led_get(mc_cdev->subled_info[i].channel);
> + /* Mark the overall brightness as LED_ON if any of the subleds are on */
> + if (mc_cdev->subled_info[i].brightness != LED_OFF)
> + brightness = LED_ON;
> + }
> +
> + return brightness;
> +}
> +
> +static void silicom_mec_led_mc_brightness_set(struct led_classdev *led_cdev,
> +
> +enum led_brightness brightness) {
> + struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(led_cdev);
> + int i;
> +
> + led_mc_calc_color_components(mc_cdev, brightness);
> + for (i = 0; i < mc_cdev->num_colors; i++) {
> + silicom_mec_port_set(mc_cdev->subled_info[i].channel,
> +
> + mc_cdev->subled_info[i].brightness);
Align the arguments to the same column please.
Henry: OK
> + }
> +}
> +
> +static int silicom_gpio_get_direction(struct gpio_chip *gc, unsigned
> +int offset) {
> + u8 *channels = gpiochip_get_data(gc);
> +
> + /* Input registers have offsets between [0x00, 0x07] */
> + if (CHANNEL_TO_OFFSET(channels[offset]) < 0x08)
> + return GPIO_LINE_DIRECTION_IN;
> +
> + return GPIO_LINE_DIRECTION_OUT;
> +}
> +
> +static int silicom_gpio_direction_input(struct gpio_chip *gc,
> +unsigned int offset) {
> + int direction = silicom_gpio_get_direction(gc, offset);
> +
> + return direction == GPIO_LINE_DIRECTION_IN ? 0 : -EINVAL; }
> +
> +static void silicom_gpio_set(struct gpio_chip *gc, unsigned int
> +offset, int value) {
> + u8 *channels = gpiochip_get_data(gc);
> + int direction = silicom_gpio_get_direction(gc, offset);
> + int channel = channels[offset];
> +
> + if (direction == GPIO_LINE_DIRECTION_IN)
> + return;
> +
> + if (value)
> + silicom_mec_port_set(channel, 0);
> + else if (value == 0)
> + silicom_mec_port_set(channel, 1);
> + else
> + pr_err("Wrong argument value: %d\n", value); }
> +
> +static int silicom_gpio_direction_output(struct gpio_chip *gc,
> +unsigned int offset, int value) {
> + int direction = silicom_gpio_get_direction(gc, offset);
> +
> + if (direction == GPIO_LINE_DIRECTION_IN)
> + return -EINVAL;
> +
> + silicom_gpio_set(gc, offset, value);
> +
> + return 0;
> +}
> +
> +static int silicom_gpio_get(struct gpio_chip *gc, unsigned int
> +offset) {
> + u8 *channels = gpiochip_get_data(gc);
> + int channel = channels[offset];
> +
> + return silicom_mec_port_get(channel); }
> +
> +
> +static ssize_t efuse_status_show(struct device *dev, struct device_attribute *attr,
> + char
> +*buf) {
> + u32 reg;
> +
> + mutex_lock(&mec_io_mutex);
> + /* Select memory region */
> + outb(IO_REG_BANK, EC_ADDR_MSB);
> + outb(0x28, EC_ADDR_LSB);
That 0x28 is some HW offset right? It should be named to what is found at that address with a define. Fiven the function name, perhaps something
along the lines of #define MEC_EFUSE_STATUS 0x28
Henry: OK
> +
> + /* Get current data from the address */
> + reg = inl(MEC_DATA(DEFAULT_CHAN_LO));
> + mutex_unlock(&mec_io_mutex);
> +
> + efuse_status = reg & 0x1;
> +
> + return sprintf(buf, "%d\n", efuse_status); }
> +
> +static ssize_t uc_version_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf) {
> + u32 reg;
> + int uc_version;
> +
> + mutex_lock(&mec_io_mutex);
> + outb(IO_REG_BANK, EC_ADDR_MSB);
> + outb(0x0, EC_ADDR_LSB);
Named define for 0x0.
Henry: OK.
> +
> + reg = inl(MEC_DATA(DEFAULT_CHAN_LO));
> + mutex_unlock(&mec_io_mutex);
> + uc_version = FIELD_GET(GENMASK(15, 8), reg);
In general, it's more useful to have #define with name for GENMASK() like this, but see below...
> + if (uc_version >= 64 && uc_version < 128) {
> + uc_version &= ~(1 << 6);
> + uc_version = 100 + uc_version;
> + } else if (uc_version >= 128 && uc_version < 192) {
> + uc_version &= ~(1 << 7);
> + uc_version = 200 + uc_version;
> + }
I see you probably missed what I tried to say earlier. Does this version field have two distinct fields? How about this:
#define MEC_VERSION_MAJOR GENMASK(15, 14)
#define MEC_VERSION_MINOR GENMASK(13, 8)
uc_version = FIELD_GET(MEC_VERSION_MAJOR, reg) * 100 +
FIELD_GET(MEC_VERSION_MINOR, reg);
...you might want to add something for >= 192 values (or accept they'll be in 300..3xx range if that's okay, I don't know the internals of this fields so I cannot tell which is preferred here).
I think the results are identical to what the above code does but doesn't require any if()s (sans >= 192 that might need additional check).
Henry: Good suggestion.
> + mec_uc_version = uc_version;
> + return sprintf(buf, "%d\n", mec_uc_version); }
> +
> +static ssize_t power_cycle_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf) {
> + return sprintf(buf, "%d\n", power_cycle); }
> +
> +static void powercycle_uc(void)
> +{
> + mutex_lock(&mec_io_mutex);
> + /* Select memory region */
> + outb(IO_REG_BANK, EC_ADDR_MSB);
> + outb(0x24, EC_ADDR_LSB);
Named define for 0x24.
Henry: OK
--
i.
