Guenter,
See my comments below.
Updated patch will be sent out later after review comments from other people are also addressed.
Thanks.
Henry
-----Original Message-----
From: Guenter Roeck <groeck7@xxxxxxxxx> On Behalf Of Guenter Roeck
Sent: Tuesday, July 18, 2023 12:41 PM
To: Henry Shi <henryshi2018@xxxxxxxxx>; hbshi69@xxxxxxxxxxx; tglx@xxxxxxxxxxxxx; mingo@xxxxxxxxxx; bp@xxxxxxxxx; dave.hansen@xxxxxxxxxxxxxxx; x86@xxxxxxxxxx; hpa@xxxxxxxxx; hdegoede@xxxxxxxxxx; markgross@xxxxxxxxxx; jdelvare@xxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; platform-driver-x86@xxxxxxxxxxxxxxx; linux-hwmon@xxxxxxxxxxxxxxx
Cc: hb_shi2003@xxxxxxxxx; Huibin Shi <henrys@xxxxxxxxxxxxxxx>; Wen Wang <wenw@xxxxxxxxxxxxxxx>
Subject: Re: [PATCH] Add Silicom Platform Driver
Caution: This is an external email. Please take care when clicking links or opening attachments.
On 7/18/23 09:01, Henry Shi wrote:
> The Silicom platform (silicom-platform) Linux driver for Swisscom
> Business Box (Swisscom BB) as well as Cordoba family products is a
> software solution designed to facilitate the efficient management and
> control of devices through the integration of various Linux
> frameworks. This platform driver provides seamless support for device
> management via the Linux LED framework, GPIO framework, Hardware
> Monitoring (HWMON), and device attributes. The Silicom platform
> driver's compatibility with these Linux frameworks allows applications
> to access and control Cordoba family devices using existing software
> that is compatible with these frameworks. This compatibility
> simplifies the development process, reduces dependencies on
> proprietary solutions, and promotes interoperability with other
> Linux-based systems and software.
>
> Signed-off-by: Henry Shi <henryshi2018@xxxxxxxxx>
> ---
> drivers/platform/x86/Kconfig | 12 +
> drivers/platform/x86/Makefile | 1 +
> drivers/platform/x86/silicom-platform.c | 1123 +++++++++++++++++++++++
> 3 files changed, 1136 insertions(+)
> create mode 100644 drivers/platform/x86/silicom-platform.c
>
> diff --git a/drivers/platform/x86/Kconfig
> b/drivers/platform/x86/Kconfig index 22052031c719..8c0988c2b4ce 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -188,6 +188,18 @@ config ACER_WMI
> If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
> here.
>
> +
> +config SILICOM_PLATFORM
> + tristate "Silicom Edge Networking device support"
> + depends on DMI
> + select LEDS_CLASS_MULTICOLOR
> + select GPIOLIB
> + help
> + This option enables support for the LEDs/GPIO/etc downstream of the
> + embedded controller on Silicom "Cordoba" hardware and derivatives.
> +
> + If you have a Silicom network appliance, say Y or M here.
> +
> source "drivers/platform/x86/amd/Kconfig"
>
> config ADV_SWBUTTON
> diff --git a/drivers/platform/x86/Makefile
> b/drivers/platform/x86/Makefile index 2cafe51ec4d8..f2f5743a9e54
> 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -113,6 +113,7 @@ obj-$(CONFIG_SERIAL_MULTI_INSTANTIATE) += serial-multi-instantiate.o
> obj-$(CONFIG_MLX_PLATFORM) += mlx-platform.o
> obj-$(CONFIG_TOUCHSCREEN_DMI) += touchscreen_dmi.o
> obj-$(CONFIG_WIRELESS_HOTKEY) += wireless-hotkey.o
> +obj-$(CONFIG_SILICOM_PLATFORM) += silicom-platform.o
> obj-$(CONFIG_X86_ANDROID_TABLETS) += x86-android-tablets/
>
> # Intel uncore drivers
> diff --git a/drivers/platform/x86/silicom-platform.c
> b/drivers/platform/x86/silicom-platform.c
> new file mode 100644
> index 000000000000..90431f733682
> --- /dev/null
> +++ b/drivers/platform/x86/silicom-platform.c
> @@ -0,0 +1,1123 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +//
> +// silicom-platform.c - Silicom MEC170x platform driver // //
> +Copyright (C) 2023 Henry Shi <henrys@xxxxxxxxxxxxxxx>
> +
> +#include <linux/dmi.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/init.h>
> +#include <linux/ioport.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/led-class-multicolor.h> #include <linux/module.h>
> +#include <linux/hwmon.h> #include <linux/mutex.h> #include
> +<linux/platform_device.h> #include <linux/string.h> #include
> +<linux/thermal.h>
What is this include for ?
Henry: OK, removed.
> +#include <linux/kobject.h>
> +#include <linux/sysfs.h>
> +
> +#define MEC_ADDR ((mec_io_base) + 0x02) #define MEC_DATA(byte)
> +((mec_io_base) + 0x04 + (byte)) #define EC_ADDR_LSB MEC_ADDR #define
> +EC_ADDR_MSB ((mec_io_base) + 0x03) #define SILICOM_MEC_MAGIC 0x5a
> +#define OFFSET_BIT_TO_CHANNEL(off, bit) ((((off) + 0x014) << 3) |
> +(bit)) #define CHANNEL_TO_OFFSET(chan) (((chan) >> 3) - 0x14) #define
> +CHANNEL_TO_BIT(chan) ((chan) & 0x07)
> +
> +static DEFINE_MUTEX(mec_io_mutex);
> +static int mec_io_base, mec_io_len;
mec_io_base is always 0x0800 and mec_io_len is always 0x8.
Why all that complexity with assigning values to those static variables instead of just using defines ?
> +
> +struct silicom_fan_control_data {
> + struct device *hdev;
> + int temp;
> + int fan_speed;
> +};
I do not see the point of having this data structure. Values are only written into it and never read.
Henry: The intention is to group all static variables for hwmon function together.
> +
> +static const struct hwmon_channel_info *silicom_fan_control_info[] = {
> + HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_LABEL),
> + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_LABEL),
> + NULL
> +};
> +
> +struct silicom_device_control_data {
> + struct device *my_dev;
> + int efuse_status;
> + int uc_version;
> + int power_cycle;
> +};
> +static struct silicom_device_control_data my_dev_ctl;
> +
> +struct silicom_platform_info {
> + int io_base;
> + int io_len;
> + struct led_classdev_mc *led_info;
> + struct gpio_chip *gpiochip;
> + u8 *gpio_channels;
> + u16 ngpio;
> +};
> +
> +static const char * const plat_0222_gpio_names[] = {
> + "AUTOM0_SFP_TX_FAULT",
> + "SLOT2_LED_OUT",
> + "SIM_M2_SLOT2_B_DET",
> + "SIM_M2_SLOT2_A_DET",
> + "SLOT1_LED_OUT",
> + "SIM_M2_SLOT1_B_DET",
> + "SIM_M2_SLOT1_A_DET",
> + "SLOT0_LED_OUT",
> + "WAN_SFP0_RX_LOS",
> + "WAN_SFP0_PRSNT_N",
> + "WAN_SFP0_TX_FAULT",
> + "AUTOM1_SFP_RX_LOS",
> + "AUTOM1_SFP_PRSNT_N",
> + "AUTOM1_SFP_TX_FAULT",
> + "AUTOM0_SFP_RX_LOS",
> + "AUTOM0_SFP_PRSNT_N",
> + "WAN_SFP1_RX_LOS",
> + "WAN_SFP1_PRSNT_N",
> + "WAN_SFP1_TX_FAULT",
> + "SIM_M2_SLOT1_MUX_SEL",
> + "W_DISABLE_M2_SLOT1_N",
> + "W_DISABLE_MPCIE_SLOT0_N",
> + "W_DISABLE_M2_SLOT0_N",
> + "BT_COMMAND_MODE",
> + "WAN_SFP1_TX_DISABLE",
> + "WAN_SFP0_TX_DISABLE",
> + "AUTOM1_SFP_TX_DISABLE",
> + "AUTOM0_SFP_TX_DISABLE",
> + "SIM_M2_SLOT2_MUX_SEL",
> + "W_DISABLE_M2_SLOT2_N",
> + "RST_CTL_M2_SLOT_1_N",
> + "RST_CTL_M2_SLOT_2_N",
> + "PM_USB_PWR_EN_BOT",
> + "PM_USB_PWR_EN_TOP",
> +};
> +
> +static u8 plat_0222_gpio_channels[] = {
> + OFFSET_BIT_TO_CHANNEL(0x00, 0),
> + OFFSET_BIT_TO_CHANNEL(0x00, 1),
> + OFFSET_BIT_TO_CHANNEL(0x00, 2),
> + OFFSET_BIT_TO_CHANNEL(0x00, 3),
> + OFFSET_BIT_TO_CHANNEL(0x00, 4),
> + OFFSET_BIT_TO_CHANNEL(0x00, 5),
> + OFFSET_BIT_TO_CHANNEL(0x00, 6),
> + OFFSET_BIT_TO_CHANNEL(0x00, 7),
> + OFFSET_BIT_TO_CHANNEL(0x01, 0),
> + OFFSET_BIT_TO_CHANNEL(0x01, 1),
> + OFFSET_BIT_TO_CHANNEL(0x01, 2),
> + OFFSET_BIT_TO_CHANNEL(0x01, 3),
> + OFFSET_BIT_TO_CHANNEL(0x01, 4),
> + OFFSET_BIT_TO_CHANNEL(0x01, 5),
> + OFFSET_BIT_TO_CHANNEL(0x01, 6),
> + OFFSET_BIT_TO_CHANNEL(0x01, 7),
> + OFFSET_BIT_TO_CHANNEL(0x02, 0),
> + OFFSET_BIT_TO_CHANNEL(0x02, 1),
> + OFFSET_BIT_TO_CHANNEL(0x02, 2),
> + OFFSET_BIT_TO_CHANNEL(0x09, 0),
> + OFFSET_BIT_TO_CHANNEL(0x09, 1),
> + OFFSET_BIT_TO_CHANNEL(0x09, 2),
> + OFFSET_BIT_TO_CHANNEL(0x09, 3),
> + OFFSET_BIT_TO_CHANNEL(0x0a, 0),
> + OFFSET_BIT_TO_CHANNEL(0x0a, 1),
> + OFFSET_BIT_TO_CHANNEL(0x0a, 2),
> + OFFSET_BIT_TO_CHANNEL(0x0a, 3),
> + OFFSET_BIT_TO_CHANNEL(0x0a, 4),
> + OFFSET_BIT_TO_CHANNEL(0x0a, 5),
> + OFFSET_BIT_TO_CHANNEL(0x0a, 6),
> + OFFSET_BIT_TO_CHANNEL(0x0b, 0),
> + OFFSET_BIT_TO_CHANNEL(0x0b, 1),
> + OFFSET_BIT_TO_CHANNEL(0x0b, 2),
> + OFFSET_BIT_TO_CHANNEL(0x0b, 3),
> +};
> +
> +static int silicom_gpio_get_direction(struct gpio_chip *gc, unsigned
> +int offset); static int silicom_gpio_direction_input(struct gpio_chip
> +*gc, unsigned int offset); static int
> +silicom_gpio_direction_output(struct gpio_chip *gc, unsigned int
> +offset, int value); static int silicom_gpio_get(struct gpio_chip *gc,
> +unsigned int offset); static void silicom_gpio_set(struct gpio_chip *gc, unsigned int offset, int value); static void silicom_mec_led_mc_brightness_set(struct led_classdev *led_cdev,
> + enum led_brightness
> +brightness); static enum led_brightness
> +silicom_mec_led_mc_brightness_get(struct led_classdev *led_cdev);
> +static struct platform_device *silicom_platform_dev; static struct
> +led_classdev_mc *silicom_led_info __initdata; static struct gpio_chip
> +*silicom_gpiochip __initdata; static u8 *silicom_gpio_channels
> +__initdata; static struct gpio_chip silicom_gpio_chip = {
> + .label = "silicom-gpio",
> + .get_direction = silicom_gpio_get_direction,
> + .direction_input = silicom_gpio_direction_input,
> + .direction_output = silicom_gpio_direction_output,
> + .get = silicom_gpio_get,
> + .set = silicom_gpio_set,
> + .base = -1,
> + .ngpio = ARRAY_SIZE(plat_0222_gpio_channels),
> + .names = plat_0222_gpio_names,
> + /* We're using a mutex to protect the indirect access, so we can sleep if the lock blocks */
> + .can_sleep = true,
> +};
> +
> +static struct mc_subled plat_0222_wan_mc_subled_info[] __initdata = {
> + {
> + .color_index = LED_COLOR_ID_WHITE,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 7),
> + },
> + {
> + .color_index = LED_COLOR_ID_YELLOW,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 6),
> + },
> + {
> + .color_index = LED_COLOR_ID_RED,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 5),
> + },
> +};
> +
> +static struct mc_subled plat_0222_sys_mc_subled_info[] __initdata = {
> + {
> + .color_index = LED_COLOR_ID_WHITE,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 4),
> + },
> + {
> + .color_index = LED_COLOR_ID_AMBER,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 3),
> + },
> + {
> + .color_index = LED_COLOR_ID_RED,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 2),
> + },
> +};
> +
> +static struct mc_subled plat_0222_stat1_mc_subled_info[] __initdata = {
> + {
> + .color_index = LED_COLOR_ID_RED,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 1),
> + },
> + {
> + .color_index = LED_COLOR_ID_GREEN,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 0),
> + },
> + {
> + .color_index = LED_COLOR_ID_BLUE,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 7),
> + },
> + {
> + .color_index = LED_COLOR_ID_YELLOW,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 6),
> + },
> +};
> +
> +static struct mc_subled plat_0222_stat2_mc_subled_info[] __initdata = {
> + {
> + .color_index = LED_COLOR_ID_RED,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 5),
> + },
> + {
> + .color_index = LED_COLOR_ID_GREEN,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 4),
> + },
> + {
> + .color_index = LED_COLOR_ID_BLUE,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 3),
> + },
> + {
> + .color_index = LED_COLOR_ID_YELLOW,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 2),
> + },
> +};
> +
> +static struct mc_subled plat_0222_stat3_mc_subled_info[] __initdata = {
> + {
> + .color_index = LED_COLOR_ID_RED,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 1),
> + },
> + {
> + .color_index = LED_COLOR_ID_GREEN,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 0),
> + },
> + {
> + .color_index = LED_COLOR_ID_BLUE,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x0e, 1),
> + },
> + {
> + .color_index = LED_COLOR_ID_YELLOW,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x0e, 0),
> + },
> +};
> +
> +static struct led_classdev_mc plat_0222_mc_led_info[] __initdata = {
> + {
> + .led_cdev = {
> + .name = "multicolor:wan",
> + .brightness = 0,
> + .max_brightness = 1,
> + .brightness_set = silicom_mec_led_mc_brightness_set,
> + .brightness_get = silicom_mec_led_mc_brightness_get,
> + },
> + .num_colors = ARRAY_SIZE(plat_0222_wan_mc_subled_info),
> + .subled_info = plat_0222_wan_mc_subled_info,
> + },
> + {
> + .led_cdev = {
> + .name = "multicolor:sys",
> + .brightness = 0,
> + .max_brightness = 1,
> + .brightness_set = silicom_mec_led_mc_brightness_set,
> + .brightness_get = silicom_mec_led_mc_brightness_get,
> + },
> + .num_colors = ARRAY_SIZE(plat_0222_sys_mc_subled_info),
> + .subled_info = plat_0222_sys_mc_subled_info,
> + },
> + {
> + .led_cdev = {
> + .name = "multicolor:stat1",
> + .brightness = 0,
> + .max_brightness = 1,
> + .brightness_set = silicom_mec_led_mc_brightness_set,
> + .brightness_get = silicom_mec_led_mc_brightness_get,
> + },
> + .num_colors = ARRAY_SIZE(plat_0222_stat1_mc_subled_info),
> + .subled_info = plat_0222_stat1_mc_subled_info,
> + },
> + {
> + .led_cdev = {
> + .name = "multicolor:stat2",
> + .brightness = 0,
> + .max_brightness = 1,
> + .brightness_set = silicom_mec_led_mc_brightness_set,
> + .brightness_get = silicom_mec_led_mc_brightness_get,
> + },
> + .num_colors = ARRAY_SIZE(plat_0222_stat2_mc_subled_info),
> + .subled_info = plat_0222_stat2_mc_subled_info,
> + },
> + {
> + .led_cdev = {
> + .name = "multicolor:stat3",
> + .brightness = 0,
> + .max_brightness = 1,
> + .brightness_set = silicom_mec_led_mc_brightness_set,
> + .brightness_get = silicom_mec_led_mc_brightness_get,
> + },
> + .num_colors = ARRAY_SIZE(plat_0222_stat3_mc_subled_info),
> + .subled_info = plat_0222_stat3_mc_subled_info,
> + },
> + { },
> +};
> +
> +static struct silicom_platform_info silicom_plat_0222_cordoba_info __initdata = {
> + .io_base = 0x800,
> + .io_len = 8,
> + .led_info = plat_0222_mc_led_info,
> + .gpiochip = &silicom_gpio_chip,
> + .gpio_channels = plat_0222_gpio_channels,
> + /* The original generic cordoba does not have the last 4 outputs of the plat_0222 BB variant,
> + * the rest are the same, so use the same longer list, but ignore the last entries here
> + */
> + .ngpio = ARRAY_SIZE(plat_0222_gpio_channels),
> +
> +};
> +
> +static struct mc_subled cordoba_fp_left_mc_subled_info[] __initdata = {
> + {
> + .color_index = LED_COLOR_ID_RED,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x08, 6),
> + },
> + {
> + .color_index = LED_COLOR_ID_GREEN,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x08, 5),
> + },
> + {
> + .color_index = LED_COLOR_ID_BLUE,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x09, 7),
> + },
> + {
> + .color_index = LED_COLOR_ID_AMBER,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x09, 4),
> + },
> +};
> +
> +static struct mc_subled cordoba_fp_center_mc_subled_info[] __initdata = {
> + {
> + .color_index = LED_COLOR_ID_RED,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x08, 7),
> + },
> + {
> + .color_index = LED_COLOR_ID_GREEN,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x08, 4),
> + },
> + {
> + .color_index = LED_COLOR_ID_BLUE,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x08, 3),
> + },
> + {
> + .color_index = LED_COLOR_ID_AMBER,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x09, 6),
> + },
> +};
> +
> +static struct mc_subled cordoba_fp_right_mc_subled_info[] __initdata = {
> + {
> + .color_index = LED_COLOR_ID_RED,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x08, 2),
> + },
> + {
> + .color_index = LED_COLOR_ID_GREEN,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x08, 1),
> + },
> + {
> + .color_index = LED_COLOR_ID_BLUE,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x08, 0),
> + },
> + {
> + .color_index = LED_COLOR_ID_AMBER,
> + .brightness = 1,
> + .intensity = 0,
> + .channel = OFFSET_BIT_TO_CHANNEL(0x09, 5),
> + },
> +};
> +
> +static struct led_classdev_mc cordoba_mc_led_info[] __initdata = {
> + {
> + .led_cdev = {
> + .name = "multicolor:fp_left",
> + .brightness = 0,
> + .max_brightness = 1,
> + .brightness_set = silicom_mec_led_mc_brightness_set,
> + .brightness_get = silicom_mec_led_mc_brightness_get,
> + },
> + .num_colors = ARRAY_SIZE(cordoba_fp_left_mc_subled_info),
> + .subled_info = cordoba_fp_left_mc_subled_info,
> + },
> + {
> + .led_cdev = {
> + .name = "multicolor:fp_center",
> + .brightness = 0,
> + .max_brightness = 1,
> + .brightness_set = silicom_mec_led_mc_brightness_set,
> + .brightness_get = silicom_mec_led_mc_brightness_get,
> + },
> + .num_colors = ARRAY_SIZE(cordoba_fp_center_mc_subled_info),
> + .subled_info = cordoba_fp_center_mc_subled_info,
> + },
> + {
> + .led_cdev = {
> + .name = "multicolor:fp_right",
> + .brightness = 0,
> + .max_brightness = 1,
> + .brightness_set = silicom_mec_led_mc_brightness_set,
> + .brightness_get = silicom_mec_led_mc_brightness_get,
> + },
> + .num_colors = ARRAY_SIZE(cordoba_fp_right_mc_subled_info),
> + .subled_info = cordoba_fp_right_mc_subled_info,
> + },
> + { },
> +};
> +
> +static struct silicom_platform_info silicom_generic_cordoba_info __initdata = {
> + .io_base = 0x800,
> + .io_len = 8,
> + .led_info = cordoba_mc_led_info,
> + .gpiochip = &silicom_gpio_chip,
> + .gpio_channels = plat_0222_gpio_channels,
> + .ngpio = ARRAY_SIZE(plat_0222_gpio_channels),
> +};
> +
> +static struct platform_driver silicom_platform_driver = {
> + .driver = {
> + .name = "silicom-platform",
> + },
> +};
> +
> +void lock_io_modules(void)
> +{
> + mutex_lock(&mec_io_mutex);
> +}
> +EXPORT_SYMBOL(lock_io_modules);
> +
> +void unlock_io_modules(void)
> +{
> + mutex_unlock(&mec_io_mutex);
> +}
> +EXPORT_SYMBOL(unlock_io_modules);
> +
> +static ssize_t efuse_status_show(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + u32 reg;
> + u32 bank = 0;
> + u32 offset = 0x28;
> + u32 byte_pos = 0;
> +
> + mutex_lock(&mec_io_mutex);
> + /* Select memory region */
> + outb(bank, EC_ADDR_MSB);
> + outb(offset, EC_ADDR_LSB);
> +
> + /* Get current date from the address */
> + reg = inl(MEC_DATA(byte_pos));
> + mutex_unlock(&mec_io_mutex);
> +
> + my_dev_ctl.efuse_status = reg & 0x1;
> +
> + return sprintf(buf, "%d\n", my_dev_ctl.efuse_status); }
> +
> +static ssize_t uc_version_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf) {
> + u32 reg;
> + u32 bank = 0;
> + u32 offset = 0x0;
> + u32 byte_pos = 0;
> + int uc_version;
> +
> + mutex_lock(&mec_io_mutex);
> + outb(bank, EC_ADDR_MSB);
> + outb(offset, EC_ADDR_LSB);
> +
> + reg = inl(MEC_DATA(byte_pos));
> + mutex_unlock(&mec_io_mutex);
> +
> + uc_version = (reg >> 8) & 0xFF;
> + if (uc_version >= 64 && uc_version < 128) {
> + uc_version = uc_version - 64;
> + if (uc_version < 10)
> + uc_version = 100 + uc_version;
> + else
> + uc_version = 100 + 10 * (uc_version / 10) + uc_version % 10;
> + } else if (uc_version >= 128 && uc_version < 192) {
> + uc_version = uc_version - 128;
> + if (uc_version < 10)
> + uc_version = 200 + uc_version;
> + else
> + uc_version = 200 + 10 * (uc_version / 10) + uc_version % 10;
> + }
> + my_dev_ctl.uc_version = uc_version;
> + return sprintf(buf, "%d\n", my_dev_ctl.uc_version); }
> +
> +static ssize_t power_cycle_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf) {
> + return sprintf(buf, "%d\n", my_dev_ctl.power_cycle); }
> +
> +static void powercycle_uc(void)
> +{
> + u32 bank = 0;
> + u32 offset = 0x24;
> + u32 byte_pos = 0;
> +
> + mutex_lock(&mec_io_mutex);
> + /* Select memory region */
> + outb(bank, EC_ADDR_MSB);
> + outb(offset, EC_ADDR_LSB);
> +
> + /* Set to 1 for current date from the address */
> + outb(1, MEC_DATA(byte_pos));
> + mutex_unlock(&mec_io_mutex);
> +}
> +
> +static ssize_t power_cycle_store(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count) {
> + if (sscanf(buf, "%du", &my_dev_ctl.power_cycle) != 1) {
> + dev_err(dev, "Failed to read power_cycle\n");
> + return -EINVAL;
> + }
> + if (my_dev_ctl.power_cycle > 0)
> + powercycle_uc();
> +
> + return count;
> +}
> +
> +static struct device_attribute my_dev_attr[] = {
> + {
> + .attr = {.name = "efuse_status", .mode = 0644},
> + .show = efuse_status_show,
> + .store = NULL
> + },
> + {
> + .attr = {.name = "uc_version", .mode = 0644},
> + .show = uc_version_show,
> + .store = NULL
> + },
> + {
> + .attr = {.name = "power_cycle", .mode = 0644},
> + .show = power_cycle_show,
> + .store = power_cycle_store
> + },
> +};
> +
> +static int silicom_gpio_get_direction(struct gpio_chip *gc, unsigned
> +int offset) {
> + u8 *channels = gpiochip_get_data(gc);
> +
> + /* Input registers have offsets between [0x00, 0x07] */
> + if (CHANNEL_TO_OFFSET(channels[offset]) < 0x08)
> + return GPIO_LINE_DIRECTION_IN;
> +
> + return GPIO_LINE_DIRECTION_OUT;
> +}
> +
> +static int silicom_gpio_direction_input(struct gpio_chip *gc,
> +unsigned int offset) {
> + int direction = silicom_gpio_get_direction(gc, offset);
> +
> + return direction == GPIO_LINE_DIRECTION_IN ? 0 : -EINVAL; }
> +
> +static void silicom_gpio_set(struct gpio_chip *gc, unsigned int
> +offset, int value) {
> + u8 *channels = gpiochip_get_data(gc);
> + int direction = silicom_gpio_get_direction(gc, offset);
> + int channel = channels[offset];
> + u8 reg;
> +
> + if (direction == GPIO_LINE_DIRECTION_IN)
> + return;
> +
> + mutex_lock(&mec_io_mutex);
> + /* Get the dword offset from the channel */
> + outb((channel >> 3) & 0xfc, MEC_ADDR);
> +
> + /* Get the current register */
> + reg = inb(MEC_DATA((channel >> 3) & 0x03));
> + if (value == 0)
> + reg &= ~(1 << (channel & 0x7));
> + else if (value > 0)
> + reg |= 1 << (channel & 0x7);
> + else
> + pr_err("Invalid GPIO value: %d\n", value);
> + outb(reg, MEC_DATA((channel >> 3) & 0x03));
> + mutex_unlock(&mec_io_mutex);
> +}
> +
> +static int silicom_gpio_direction_output(struct gpio_chip *gc,
> +unsigned int offset, int value) {
> + int direction = silicom_gpio_get_direction(gc, offset);
> +
> + if (direction == GPIO_LINE_DIRECTION_IN)
> + return -EINVAL;
> +
> + silicom_gpio_set(gc, offset, value);
> +
> + return 0;
> +}
> +
> +static int silicom_gpio_get(struct gpio_chip *gc, unsigned int
> +offset) {
> + u8 *channels = gpiochip_get_data(gc);
> + int channel = channels[offset];
> + u8 reg;
> +
> + mutex_lock(&mec_io_mutex);
> + /* Get the dword offset from the channel */
> + outb((channel >> 3) & 0xfc, MEC_ADDR);
> +
> + /* Get the current register */
> + reg = inb(MEC_DATA((channel >> 3) & 0x03));
> + mutex_unlock(&mec_io_mutex);
> +
> + return (reg >> (channel & 0x7)) & 0x01; }
> +
> +static int __init silicom_mc_leds_register(struct device *dev,
> + const struct led_classdev_mc
> +*mc_leds) {
> + struct led_classdev_mc *led;
> + int i, err;
> +
> + for (i = 0; mc_leds[i].led_cdev.name; i++) {
> + /* allocate and copy data from the init constansts */
> + led = devm_kzalloc(dev, sizeof(struct led_classdev_mc), GFP_KERNEL);
> + if (IS_ERR_OR_NULL(led)) {
> + dev_err(dev, "Failed to alloc led_classdev_mc[%d]: %ld\n", i, PTR_ERR(led));
> + return -ENOMEM;
> + }
> + memcpy(led, &mc_leds[i], sizeof(*led));
> +
> + led->subled_info = devm_kzalloc(dev, led->num_colors * sizeof(struct mc_subled),
> + GFP_KERNEL);
> + if (IS_ERR_OR_NULL(led->subled_info)) {
> + dev_err(dev, "Failed to alloc subled_info[%d]: %ld\n",
> + i, PTR_ERR(led->subled_info));
> + return -ENOMEM;
> + }
> + memcpy(led->subled_info, mc_leds[i].subled_info,
> + led->num_colors * sizeof(struct mc_subled));
> +
> + err = devm_led_classdev_multicolor_register(dev, led);
> + if (err) {
> + dev_err(dev, "Failed to register[%d]: %d\n", i, err);
> + return err;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static void silicom_mec_led_set(int channel, int on) {
> + u8 reg;
> +
> + mutex_lock(&mec_io_mutex);
> + /* Get the dword offset from the channel */
> + outb((channel >> 3) & 0xfc, MEC_ADDR);
> +
> + /* Get the current LED settings */
> + reg = inb(MEC_DATA((channel >> 3) & 0x03));
> +
> + /* Outputs are active low, so clear the bit for on, or set it for off */
> + if (on)
> + reg &= ~(1 << (channel & 0x7));
> + else
> + reg |= 1 << (channel & 0x7);
> +
> + /* Write back the updated register */
> + outb(reg, MEC_DATA((channel >> 3) & 0x03));
> +
> + mutex_unlock(&mec_io_mutex);
> +}
> +
> +static void silicom_mec_led_mc_brightness_set(struct led_classdev *led_cdev,
> + enum led_brightness
> +brightness) {
> + struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(led_cdev);
> + int i;
> +
> + led_mc_calc_color_components(mc_cdev, brightness);
> +
> + for (i = 0; i < mc_cdev->num_colors; i++) {
> + silicom_mec_led_set(mc_cdev->subled_info[i].channel,
> + mc_cdev->subled_info[i].brightness);
> + }
> +}
> +
> +static enum led_brightness silicom_mec_led_get(int channel) {
> + u8 reg;
> +
> + mutex_lock(&mec_io_mutex);
> + /* Get the dword offset of the register for this LED from the channel */
> + outb((channel >> 3) & 0xfc, MEC_ADDR);
> + /* Get the current LED settings */
> + reg = inb(MEC_DATA((channel >> 3) & 0x03));
> + mutex_unlock(&mec_io_mutex);
> +
> + /* Outputs are active low */
> + return reg & (1 << (channel & 0x7)) ? LED_OFF : LED_ON; }
> +
> +static enum led_brightness silicom_mec_led_mc_brightness_get(struct
> +led_classdev *led_cdev) {
> + struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(led_cdev);
> + enum led_brightness brightness = LED_OFF;
> + int i;
> +
> + for (i = 0; i < mc_cdev->num_colors; i++) {
> + mc_cdev->subled_info[i].brightness =
> +
> + silicom_mec_led_get(mc_cdev->subled_info[i].channel);
> +
> + /* Mark the overall brightness as LED_ON if any of the subleds are on */
> + if (mc_cdev->subled_info[i].brightness != LED_OFF)
> + brightness = LED_ON;
> + }
> +
> + return brightness;
> +}
> +
> +
> +static u32 rpm_get(void)
> +{
> + u32 reg;
> + u32 bank = 0;
> + u32 offset = 0xc;
> + u32 byte_pos = 0;
Pointless variables.
Henry: Ilpo also pointed out this. There variable will be removed.
> +
> + mutex_lock(&mec_io_mutex);
> + /* Select memory region */
> + outb(bank, EC_ADDR_MSB);
> + outb(offset, EC_ADDR_LSB);
> + /* Get current date from the address */
date or data ?
Henry: corrected this typo here, and other three locations.
> + reg = inw(MEC_DATA(byte_pos));
> + mutex_unlock(&mec_io_mutex);
I think this should be handled in a function.
return silicom_read_word(0xc);
with the above implemented in silicom_read_word().
Same for functions reading 8- or 32-bit data.
Henry: In my opinion, Linux already has inw(), inb function for io port access. There is no much value to wrap them with other functions.
> +
> + return reg;
> +}
> +
> +static u32 temp_get(void)
> +{
> + u32 reg;
> + u32 bank = 0;
> + u32 offset = 0xc;
> + u32 byte_pos = 0;
> +
> + mutex_lock(&mec_io_mutex);
> + /* Select memory region */
> + outb(bank, EC_ADDR_MSB);
> + outb(offset, EC_ADDR_LSB);
> + /* Get current date from the address */
data ?
Henry: typo will be corrected.
> + reg = inl(MEC_DATA(byte_pos));
> + mutex_unlock(&mec_io_mutex);
> +
> + return (reg >> 16) / 10;
That doesn't look correct. Please confirm that the temperature is indeed reported in 1/10000th degress C by the chip.
Henry: This is to correct micro-controller firmware implementation: when firmware put temperature to the register, it put (real temperature * 10) as an integer to the register. (This is for internal debugging purpose, to get temperature with more precision). But the kernel driver need report real temperature.
> +}
> +
> +static umode_t silicom_fan_control_fan_is_visible(const u32 attr) {
> + switch (attr) {
> + case hwmon_fan_input:
> + case hwmon_fan_label:
> + return 0444;
> + default:
> + return 0;
> + }
> +}
> +
> +static umode_t silicom_fan_control_temp_is_visible(const u32 attr) {
> + switch (attr) {
> + case hwmon_temp_input:
> + case hwmon_temp_label:
> + return 0444;
> + default:
> + return 0;
> + }
> +}
> +
> +static int silicom_fan_control_read_fan(struct device *dev, u32 attr,
> +long *val) {
> + struct silicom_fan_control_data *ctl = dev_get_drvdata(dev);
> +
> + switch (attr) {
> + case hwmon_fan_input:
> + ctl->fan_speed = rpm_get();
> + *val = ctl->fan_speed;
*val = rpm_get();
would do, and storing the value in ctl seems unnecessary / pointless.
Henry: OK, will remove structure silicom_fan_control_data.
> + return 0;
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static int silicom_fan_control_read_temp(struct device *dev, u32
> +attr, long *val) {
> + struct silicom_fan_control_data *ctl = dev_get_drvdata(dev);
> +
> + switch (attr) {
> + case hwmon_temp_input:
> + ctl->temp = temp_get();
> + *val = ctl->temp;
Why not just
*val = temp_get();
?
Henry: OK
ctl is not really used except to store a value which is never read.
I don't see the point of doing that. Same for fan_speed.
Henry: OK, will remove this structure.
> + return 0;
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static umode_t silicom_fan_control_is_visible(const void *data,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel) {
> + switch (type) {
> + case hwmon_fan:
> + return silicom_fan_control_fan_is_visible(attr);
> + case hwmon_temp:
> + return silicom_fan_control_temp_is_visible(attr);
> + default:
> + return 0;
> + }
> +}
> +
> +static int silicom_fan_control_read(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val) {
> + switch (type) {
> + case hwmon_fan:
> + return silicom_fan_control_read_fan(dev, attr, val);
> + case hwmon_temp:
> + return silicom_fan_control_read_temp(dev, attr, val);
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static int silicom_fan_control_read_labels(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, const
> +char **str) {
> + switch (type) {
> + case hwmon_fan:
> + *str = "Fan Speed (RPM)";
RPM is redundant. Fan speed is always measured in RPM.
This would result in output such as
Fan Speed (RPM): 1166 RPM
which really doesn't make sense. Also, and that is true for both labels, the expected string is the location of the sensor (e.g., "CPU Fan", not something generic like "Fan Speed" or "Thermostat Sensor".
Henry: OK, will change to "Fan Speed".
> + return 0;
> + case hwmon_temp:
> + *str = "Thermostat Sensor";
> + return 0;
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static int silicom_fan_control_write(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long val) {
> + return 0;
> +}
Unnecessary if there is no writeable attribute (and bad to claim that there was no error if the function was somehow called).
Henry: OK, will remove this function.
> +
> +static const struct hwmon_ops silicom_fan_control_hwmon_ops = {
> + .is_visible = silicom_fan_control_is_visible,
> + .read = silicom_fan_control_read,
> + .write = silicom_fan_control_write,
> + .read_string = silicom_fan_control_read_labels, };
> +
> +static const struct hwmon_chip_info silicom_chip_info = {
> + .ops = &silicom_fan_control_hwmon_ops,
> + .info = silicom_fan_control_info, };
> +
> +static int __init silicom_platform_probe(struct platform_device
> +*device) {
> + int i, err;
> + u8 magic, ver;
> + struct silicom_fan_control_data *ctl;
> + const char *name = "Silocom_Fan_Monitor";
> + const char *dev_name = "Silicom_platform";
> +
> + mec_io_base = 0x0800;
> + mec_io_len = 8;
> + if (!devm_request_region(&device->dev, mec_io_base, mec_io_len, "mec")) {
> + dev_err(&device->dev, "couldn't reserve MEC io ports\n");
> + return -EBUSY;
> + }
> +
> + /* Sanity check magic number read for EC */
> + outb(0x00, MEC_ADDR);
> + magic = inb(MEC_DATA(0));
> + ver = inb(MEC_DATA(1));
> + dev_dbg(&device->dev, "EC magic 0x%02x, version 0x%02x\n",
> + magic, ver);
> +
> + if (magic != SILICOM_MEC_MAGIC) {
> + dev_err(&device->dev, "Bad EC magic 0x%02x!\n", magic);
> + return -ENODEV;
> + }
> +
> + if (silicom_led_info) {
I don't understand the conditional. silicom_led_info is always set in silicom_platform_info_init(). The code makes it look like it is optional, but each instance of silicom_platform_info initializes it. That seems quite pointless to me.
Henry: The check will be removed.
> + err = silicom_mc_leds_register(&device->dev, silicom_led_info);
> + if (err) {
> + dev_err(&device->dev, "Failed to register LEDs\n");
> + return err;
> + }
> + }
> +
> + if (silicom_gpiochip) {
> + err = devm_gpiochip_add_data(&device->dev, silicom_gpiochip, silicom_gpio_channels);
> + if (err) {
> + dev_err(&device->dev, "Failed to register gpiochip: %d\n", err);
> + return err;
> + }
> + }
> +
> + ctl = devm_kzalloc(&device->dev, sizeof(*ctl), GFP_KERNEL);
> + if (!ctl)
> + return -ENOMEM;
> +
> + ctl->hdev = devm_hwmon_device_register_with_info(&device->dev, name, ctl,
> + &silicom_chip_info, NULL);
> +
ctl->hdev is not used anywhere and thus pointless.
Henry: the defining structure of ctl will be removed.
> + my_dev_ctl.my_dev = root_device_register(dev_name);
> + for (i = 0; i < ARRAY_SIZE(my_dev_attr); i++) {
> + err = sysfs_create_file(&my_dev_ctl.my_dev->kobj, &my_dev_attr[i].attr);
> + if (err) {
> + pr_debug("failed to create the foo file in /sys/devices/Silicom_platform\n");
> + break;
> + > + }
> +
> + return err;
> +}
> +
> +static int __init silicom_platform_info_init(const struct
> +dmi_system_id *id) {
> + struct silicom_platform_info *info = id->driver_data;
> +
> + dev_info(&silicom_platform_dev->dev, "Detected %s\n",
> + id->ident);
> +
> + mec_io_base = info->io_base;
> + mec_io_len = info->io_len;
> + silicom_led_info = info->led_info;
> + silicom_gpio_channels = info->gpio_channels;
> + silicom_gpiochip = info->gpiochip;
> + if (silicom_gpiochip)
> + silicom_gpiochip->ngpio = info->ngpio;
> +
> + return 1;
> +}
> +
> +static const struct dmi_system_id silicom_dmi_ids[] __initconst = {
> + {
> + .callback = silicom_platform_info_init,
> + .ident = "Silicom Cordoba (Generic)",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Silicom"),
> + DMI_MATCH(DMI_BOARD_NAME, "80300-0214-G"),
> + },
> + .driver_data = &silicom_generic_cordoba_info,
> + },
> + {
> + .callback = silicom_platform_info_init,
> + .ident = "Silicom Cordoba (Generic)",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Silicom"),
> + DMI_MATCH(DMI_BOARD_NAME, "80500-0214-G"),
> + },
> + .driver_data = &silicom_generic_cordoba_info,
> + },
> + {
> + .callback = silicom_platform_info_init,
> + .ident = "Silicom Cordoba (plat_0222)",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Silicom"),
> + DMI_MATCH(DMI_BOARD_NAME, "80300-0222-G"),
> + },
> + .driver_data = &silicom_plat_0222_cordoba_info,
> + },
> + { },
> +};
> +
> +static int __init silicom_platform_init(void) {
> + struct device *dev;
> + int err;
> +
> + /* register a platform device to act as the parent for LEDS, etc. */
> + silicom_platform_dev = platform_device_register_simple("silicom-platform", -1, NULL, 0);
> + if (IS_ERR(silicom_platform_dev)) {
> + err = PTR_ERR(silicom_platform_dev);
> + pr_err("failed to register silicom-platform device: %d\n", err);
> + goto silicom_init_register_err;
> + }
> + dev = &silicom_platform_dev->dev;
> +
> + err = dmi_check_system(silicom_dmi_ids);
> + if (err == 0) {
> + dev_err(dev, "No DMI match for this platform\n");
> + err = -ENODEV;
> + goto silicom_init_probe_err;
> + }
> +
> + /* Directly probe the platform driver in init since this isn't a
> + * hotpluggable device. That means we don't need to register a driver
> + * that needs to wait around in memory on the chance a matching device
> + * would get added. Instead run once in __init so that we can free all
> + * those resources when the __init region is wiped
> + */
> + err = platform_driver_probe(&silicom_platform_driver, silicom_platform_probe);
> + if (err) {
> + dev_err(dev, "Failed to probe platform driver %d\n", err);
> + goto silicom_init_probe_err;
> + }
> +
> + return 0;
> +
> +silicom_init_probe_err:
> + if (silicom_platform_dev) {
> + platform_device_unregister(silicom_platform_dev);
> + silicom_platform_dev = NULL;
> + }
> + if (my_dev_ctl.my_dev) {
> + root_device_unregister(my_dev_ctl.my_dev);
> + my_dev_ctl.my_dev = NULL;
> + }
> +
> +silicom_init_register_err:
> + return err;
> +}
> +
> +static void __exit silicom_platform_exit(void) {
> + int i;
> +
> + if (silicom_platform_dev) {
> + platform_device_unregister(silicom_platform_dev);
> + platform_driver_unregister(&silicom_platform_driver);
> + }
> +
> + if (my_dev_ctl.my_dev) {
> + for (i = 0; i < ARRAY_SIZE(my_dev_attr); i++)
> + sysfs_remove_file(&my_dev_ctl.my_dev->kobj, &my_dev_attr[i].attr);
> + root_device_unregister(my_dev_ctl.my_dev);
> + }
> + mutex_destroy(&mec_io_mutex);
> +}
> +
> +module_init(silicom_platform_init);
> +module_exit(silicom_platform_exit);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Henry Shi <henrys@xxxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Platform driver for Silicom network appliances");
> +
> +MODULE_DEVICE_TABLE(dmi, silicom_dmi_ids);
> +
