On 6/25/23 04:18, Frank Crawford wrote:
The temperature sensor type needs to be used in multiple places, so
split it out into its own function. It is used both in show_temp_type
attribute and testing if the attribute should be visible (i.e. is
defined).
The sensor type also reports the type AMDTSI on certain chipsets.
Signed-off-by: Frank Crawford <frank@xxxxxxxxxxxxxxxxxx>
---
drivers/hwmon/it87.c | 78 ++++++++++++++++++++++++++++++++++++--------
1 file changed, 65 insertions(+), 13 deletions(-)
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 5deff5e5f693..ba75f33301ce 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -221,6 +221,10 @@ static bool fix_pwm_polarity;
* Super-I/O configuration space.
*/
#define IT87_REG_VID 0x0a
+
+/* Interface Selection register on other chips */
+#define IT87_REG_IFSEL 0x0a
+
/*
* The IT8705F and IT8712F earlier than revision 0x08 use register 0x0b
* for fan divisors. Later IT8712F revisions must use 16-bit tachometer
@@ -1159,28 +1163,68 @@ static SENSOR_DEVICE_ATTR_2(temp4_input, S_IRUGO, show_temp, NULL, 3, 0);
static SENSOR_DEVICE_ATTR_2(temp5_input, S_IRUGO, show_temp, NULL, 4, 0);
static SENSOR_DEVICE_ATTR_2(temp6_input, S_IRUGO, show_temp, NULL, 5, 0);
+static int get_temp_type(struct it87_data *data, int index)
+{
+ /*
+ * 2 is deprecated;
+ * 3 = thermal diode;
+ * 4 = thermistor;
+ * 5 = AMDTSI;
+ * 6 = Intel PECI;
+ * 0 = disabled
+ */
+ u8 reg, extra;
+ int ttype, type = 0;
+
+ /* Detect PECI vs. AMDTSI */
+ ttype = 6;
+ if ((has_temp_peci(data, index)) || data->type == it8721 ||
+ data->type == it8720) {
+ extra = it87_read_value(data, IT87_REG_IFSEL);
+ if ((extra & 0x70) == 0x40)
+ ttype = 5;
+ }
+
+ reg = it87_read_value(data, IT87_REG_TEMP_ENABLE);
+
+ /* Per chip special detection */
+ switch (data->type) {
+ case it8622:
+ if (!(reg & 0xc0) && index == 3)
+ type = ttype;
+ break;
+ default:
+ break;
+ }
+
+ if (type || index >= 3)
+ return type;
+
The above is really all new code, not just refactoring,
and needs to be explained separately. Please split the patches
into refactoring and separate patch(es) for functional changes.
Thanks,
Guenter
+ extra = it87_read_value(data, IT87_REG_TEMP_EXTRA);
+
+ if ((has_temp_peci(data, index) && (reg >> 6 == index + 1)) ||
+ (has_temp_old_peci(data, index) && (extra & 0x80)))
+ type = ttype; /* Intel PECI or AMDTSI */
+ else if (reg & BIT(index))
+ type = 3; /* thermal diode */
+ else if (reg & BIT(index + 3))
+ type = 4; /* thermistor */
+
+ return type;
+}
+
static ssize_t show_temp_type(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
struct it87_data *data = it87_update_device(dev);
- u8 reg, extra;
+ int type;
if (IS_ERR(data))
return PTR_ERR(data);
- reg = data->sensor; /* In case value is updated while used */
- extra = data->extra;
-
- if ((has_temp_peci(data, nr) && (reg >> 6 == nr + 1)) ||
- (has_temp_old_peci(data, nr) && (extra & 0x80)))
- return sprintf(buf, "6\n"); /* Intel PECI */
- if (reg & (1 << nr))
- return sprintf(buf, "3\n"); /* thermal diode */
- if (reg & (8 << nr))
- return sprintf(buf, "4\n"); /* thermistor */
- return sprintf(buf, "0\n"); /* disabled */
+ type = get_temp_type(data, sensor_attr->index);
+ return sprintf(buf, "%d\n", type);
}
static ssize_t set_temp_type(struct device *dev, struct device_attribute *attr,
@@ -2313,6 +2357,14 @@ static umode_t it87_temp_is_visible(struct kobject *kobj,
if (!(data->has_temp & BIT(i)))
return 0;
+ if (a == 3) {
+ int type = get_temp_type(data, i);
+
+ if (type == 0)
+ return 0;
+ return attr->mode;
+ }
+
if (a == 5 && !has_temp_offset(data))
return 0;
