Currently, k10temp_get_ccd_support() takes as input "pdev" and "data". However, "pdev" is already included in "data". Furthermore, the "pdev" parameter is no longer used in k10temp_get_ccd_support(), since its use was moved into read_ccd_temp_reg(). Drop the "pdev" input parameter as it is no longer needed. No functional change is intended. Signed-off-by: Yazen Ghannam <yazen.ghannam@xxxxxxx> Acked-by: Guenter Roeck <linux@xxxxxxxxxxxx> --- Link: https://lore.kernel.org/r/20230516202430.4157216-7-yazen.ghannam@xxxxxxx v1->v2: * Add Acked-by from Guenter. drivers/hwmon/k10temp.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c index dfbba8b72f43..dce97aab2fa7 100644 --- a/drivers/hwmon/k10temp.c +++ b/drivers/hwmon/k10temp.c @@ -377,8 +377,7 @@ static const struct hwmon_chip_info k10temp_chip_info = { .info = k10temp_info, }; -static void k10temp_get_ccd_support(struct pci_dev *pdev, - struct k10temp_data *data, int limit) +static void k10temp_get_ccd_support(struct k10temp_data *data, int limit) { u32 regval; int i; @@ -443,18 +442,18 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id) case 0x11: /* Zen APU */ case 0x18: /* Zen+ APU */ data->ccd_offset = 0x154; - k10temp_get_ccd_support(pdev, data, 4); + k10temp_get_ccd_support(data, 4); break; case 0x31: /* Zen2 Threadripper */ case 0x60: /* Renoir */ case 0x68: /* Lucienne */ case 0x71: /* Zen2 */ data->ccd_offset = 0x154; - k10temp_get_ccd_support(pdev, data, 8); + k10temp_get_ccd_support(data, 8); break; case 0xa0 ... 0xaf: data->ccd_offset = 0x300; - k10temp_get_ccd_support(pdev, data, 8); + k10temp_get_ccd_support(data, 8); break; } } else if (boot_cpu_data.x86 == 0x19) { @@ -467,21 +466,21 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id) case 0x21: /* Zen3 Ryzen Desktop */ case 0x50 ... 0x5f: /* Green Sardine */ data->ccd_offset = 0x154; - k10temp_get_ccd_support(pdev, data, 8); + k10temp_get_ccd_support(data, 8); break; case 0x40 ... 0x4f: /* Yellow Carp */ data->ccd_offset = 0x300; - k10temp_get_ccd_support(pdev, data, 8); + k10temp_get_ccd_support(data, 8); break; case 0x60 ... 0x6f: case 0x70 ... 0x7f: data->ccd_offset = 0x308; - k10temp_get_ccd_support(pdev, data, 8); + k10temp_get_ccd_support(data, 8); break; case 0x10 ... 0x1f: case 0xa0 ... 0xaf: data->ccd_offset = 0x300; - k10temp_get_ccd_support(pdev, data, 12); + k10temp_get_ccd_support(data, 12); break; } } else { -- 2.34.1
