add "repeatability" interface to sysfs, it could be
read or written to control the sensor.
Signed-off-by: JuenKit Yip <JuenKit_Yip@xxxxxxxxxxx>
---
Documentation/hwmon/sht3x.rst | 7 +++++++
drivers/hwmon/sht3x.c | 29 +++++++++++++++++++++++++++++
2 files changed, 36 insertions(+)
diff --git a/Documentation/hwmon/sht3x.rst b/Documentation/hwmon/sht3x.rst
index 2c87c8f58..3dc4b9c14 100644
--- a/Documentation/hwmon/sht3x.rst
+++ b/Documentation/hwmon/sht3x.rst
@@ -83,4 +83,11 @@ heater_enable: heater enable, heating element removes excess humidity from
update_interval: update interval, 0 for single shot, interval in msec
for periodic measurement. If the interval is not supported
by the sensor, the next faster interval is chosen
+repeatability: write or read repeatability, the higher repeatability means
+ the longer measurement duration, the lower noise level and
+ the larger energy consumption:
+
+ - 0: low repeatability
+ - 1: medium repeatability
+ - 2: high repeatability
=================== ============================================================
diff --git a/drivers/hwmon/sht3x.c b/drivers/hwmon/sht3x.c
index eb968b9d3..209090a48 100644
--- a/drivers/hwmon/sht3x.c
+++ b/drivers/hwmon/sht3x.c
@@ -642,6 +642,33 @@ static ssize_t update_interval_store(struct device *dev,
return count;
}
+static ssize_t repeatability_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct sht3x_data *data = dev_get_drvdata(dev);
+
+ return sysfs_emit(buf, "%d\n", data->repeatability);
+}
+
+static ssize_t repeatability_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ u8 val;
+ struct sht3x_data *data = dev_get_drvdata(dev);
+
+ val = kstrtou8(buf, 0, &val);
+ if (val)
+ return val;
+
+ val = clamp_val(val, low_repeatability, high_repeatability);
+ data->repeatability = val;
+
+ return count;
+}
+
static SENSOR_DEVICE_ATTR_RO(temp1_input, temp1_input, 0);
static SENSOR_DEVICE_ATTR_RO(humidity1_input, humidity1_input, 0);
static SENSOR_DEVICE_ATTR_RW(temp1_max, temp1_limit, limit_max);
@@ -658,6 +685,7 @@ static SENSOR_DEVICE_ATTR_RO(temp1_alarm, temp1_alarm, 0);
static SENSOR_DEVICE_ATTR_RO(humidity1_alarm, humidity1_alarm, 0);
static SENSOR_DEVICE_ATTR_RW(heater_enable, heater_enable, 0);
static SENSOR_DEVICE_ATTR_RW(update_interval, update_interval, 0);
+static SENSOR_DEVICE_ATTR_RW(repeatability, repeatability, 0);
static struct attribute *sht3x_attrs[] = {
&sensor_dev_attr_temp1_input.dev_attr.attr,
@@ -674,6 +702,7 @@ static struct attribute *sht3x_attrs[] = {
&sensor_dev_attr_humidity1_alarm.dev_attr.attr,
&sensor_dev_attr_heater_enable.dev_attr.attr,
&sensor_dev_attr_update_interval.dev_attr.attr,
+ &sensor_dev_attr_repeatability.dev_attr.attr,
NULL
};
--
2.30.2
