Hello I have tested your patch against a 6.3.4: sensors nct6799-isa-0290 Adapter: ISA adapter in0: 832.00 mV (min = +0.00 V, max = +1.74 V) in1: 1000.00 mV (min = +0.00 V, max = +0.00 V) ALARM in2: 3.38 V (min = +0.00 V, max = +0.00 V) ALARM in3: 3.34 V (min = +0.00 V, max = +0.00 V) ALARM in4: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM in5: 1.04 V (min = +0.00 V, max = +0.00 V) ALARM in6: 760.00 mV (min = +0.00 V, max = +0.00 V) ALARM in7: 3.38 V (min = +0.00 V, max = +0.00 V) ALARM in8: 3.30 V (min = +0.00 V, max = +0.00 V) ALARM in9: 1.67 V (min = +0.00 V, max = +0.00 V) ALARM in10: 560.00 mV (min = +0.00 V, max = +0.00 V) ALARM in11: 552.00 mV (min = +0.00 V, max = +0.00 V) ALARM in12: 1.04 V (min = +0.00 V, max = +0.00 V) ALARM in13: 480.00 mV (min = +0.00 V, max = +0.00 V) ALARM in14: 408.00 mV (min = +0.00 V, max = +0.00 V) ALARM fan1: 808 RPM (min = 0 RPM) fan2: 589 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 809 RPM (min = 0 RPM) fan5: 510 RPM (min = 0 RPM) fan7: 0 RPM (min = 0 RPM) SYSTIN: +33.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor CPUTIN: +38.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor AUXTIN0: +39.5°C sensor = thermistor AUXTIN1: +19.0°C sensor = thermistor AUXTIN2: +20.0°C sensor = thermistor AUXTIN3: +73.0°C sensor = thermistor PECI Agent 0 Calibration: +41.5°C PCH_CHIP_CPU_MAX_TEMP: +0.0°C PCH_CHIP_TEMP: +0.0°C PCH_CPU_TEMP: +0.0°C TSI0_TEMP: +52.4°C intrusion0: ALARM intrusion1: ALARM beep_enable: disabled Part of dmesg: [16453.196174] nct6775: Found NCT6799D or compatible chip at 0x2e:0x290 So you could add: Tested-by: Corentin Labbe <clabbe.montjoie@xxxxxxxxx> Thanks
