Check the return value of amd_smn_read() before saving a value. This ensures invalid values aren't saved or used. There are three cases here with slightly different behavior. 1) read_tempreg_nb_zen(): This is a function pointer which does not include a return code. In this case, set the register value to 0 on failure. This enforces Read-as-Zero behavior. 2) k10temp_read_temp(): This function does have return codes, so return -EINVAL on a failed register read. Continued operation is not necessary, since there is no valid data from the register. Furthermore, if the register value was set to 0, then the following operation would underflow. 3) k10temp_get_ccd_support(): This function reads the same register from multiple CCD instances in a loop. And a bitmask is formed if a specific bit is set in each register instance. The loop should continue on a failed register read, skipping the bit check. Furthermore, the __must_check attribute will be added to amd_smn_read(). Therefore, this change is required to avoid compile-time warnings. Signed-off-by: Yazen Ghannam <yazen.ghannam@xxxxxxx> Cc: stable@xxxxxxxxxxxxxxx --- drivers/hwmon/k10temp.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c index 7b177b9fbb09..6ea1fa62b7c1 100644 --- a/drivers/hwmon/k10temp.c +++ b/drivers/hwmon/k10temp.c @@ -145,8 +145,9 @@ static void read_tempreg_nb_f15(struct pci_dev *pdev, u32 *regval) static void read_tempreg_nb_zen(struct pci_dev *pdev, u32 *regval) { - amd_smn_read(amd_pci_dev_to_node_id(pdev), - ZEN_REPORTED_TEMP_CTRL_BASE, regval); + if (amd_smn_read(amd_pci_dev_to_node_id(pdev), + ZEN_REPORTED_TEMP_CTRL_BASE, regval)) + *regval = 0; } static long get_raw_temp(struct k10temp_data *data) @@ -213,9 +214,11 @@ static int k10temp_read_temp(struct device *dev, u32 attr, int channel, *val = 0; break; case 2 ... 13: /* Tccd{1-12} */ - amd_smn_read(amd_pci_dev_to_node_id(data->pdev), - ZEN_CCD_TEMP(data->ccd_offset, channel - 2), - ®val); + if (amd_smn_read(amd_pci_dev_to_node_id(data->pdev), + ZEN_CCD_TEMP(data->ccd_offset, channel - 2), + ®val)) + return -EINVAL; + *val = (regval & ZEN_CCD_TEMP_MASK) * 125 - 49000; break; default: @@ -373,8 +376,10 @@ static void k10temp_get_ccd_support(struct pci_dev *pdev, int i; for (i = 0; i < limit; i++) { - amd_smn_read(amd_pci_dev_to_node_id(pdev), - ZEN_CCD_TEMP(data->ccd_offset, i), ®val); + if (amd_smn_read(amd_pci_dev_to_node_id(pdev), + ZEN_CCD_TEMP(data->ccd_offset, i), ®val)) + continue; + if (regval & ZEN_CCD_TEMP_VALID) data->show_temp |= BIT(TCCD_BIT(i)); } -- 2.34.1