On 4/27/23 07:53, Hawkins, Nick wrote:
This is not information which should be reported through a gpio driver.
Besides, the functions don't exist at this point in the series,
and there should be no extern declarations in source files.
If you want to model fan or psu information through gpio, drop
the hwmon drivers and implement reading the status here, then use
the existing gpio-fan hwmon driver to report it in the hwmon subsystem.
Thank you for the feedback Guenter,
I see how it is possible to use gpio-fan for the fan. As for the gxp-psu
Hwmon driver can I model the gpio-fan driver to get the necessary
gpio information for power supplies?
Sorry, I don't understand. Looking into the code again, the major problem
I see is that you want to model fan install status and fan fault
status as gpio pins. The same is true for psu information (installed,
ac, dc flags).
If you want to do this, fine, but then get the status from the gpio
driver and don't export anything to the gpio driver. The kernel supports
means to do that (look at gpiod_get and similar functions). It makes the
code more complex, but I assume you know what you are doing.
Guenter
