On Wed, Mar 22, 2023 at 06:46:21AM -0500, Lakshmi Yadlapati wrote:
> Add the driver to support ACBEL FSG032 power supply.
>
> Signed-off-by: Lakshmi Yadlapati <lakshmiy@xxxxxxxxxx>
> ---
> drivers/hwmon/pmbus/Kconfig | 9 +++
> drivers/hwmon/pmbus/Makefile | 1 +
> drivers/hwmon/pmbus/acbel-fsg032.c | 96 ++++++++++++++++++++++++++++++
> 3 files changed, 106 insertions(+)
> create mode 100644 drivers/hwmon/pmbus/acbel-fsg032.c
>
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index 59d9a7430499..270b6336b76d 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -27,6 +27,15 @@ config SENSORS_PMBUS
> This driver can also be built as a module. If so, the module will
> be called pmbus.
>
> +config SENSORS_ACBEL_FSG032
> + tristate "ACBEL FSG032 Power Supply"
> + help
> + If you say yes here you get hardware monitoring support for the ACBEL
> + FSG032 Power Supply.
> +
> + This driver can also be built as a module. If so, the module will
> + be called acbel-fsg032.
> +
> config SENSORS_ADM1266
> tristate "Analog Devices ADM1266 Sequencer"
> select CRC8
> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> index 3ae019916267..84ee960a6c2d 100644
> --- a/drivers/hwmon/pmbus/Makefile
> +++ b/drivers/hwmon/pmbus/Makefile
> @@ -5,6 +5,7 @@
>
> obj-$(CONFIG_PMBUS) += pmbus_core.o
> obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
> +obj-$(CONFIG_SENSORS_ACBEL_FSG032) += acbel-fsg032.o
> obj-$(CONFIG_SENSORS_ADM1266) += adm1266.o
> obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
> obj-$(CONFIG_SENSORS_BEL_PFE) += bel-pfe.o
> diff --git a/drivers/hwmon/pmbus/acbel-fsg032.c b/drivers/hwmon/pmbus/acbel-fsg032.c
> new file mode 100644
> index 000000000000..7bfa0bf048db
> --- /dev/null
> +++ b/drivers/hwmon/pmbus/acbel-fsg032.c
> @@ -0,0 +1,96 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright 2023 IBM Corp.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/fs.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/pmbus.h>
> +#include <linux/hwmon-sysfs.h>
> +#include "pmbus.h"
> +
> +struct acbel_fsg032 {
> + struct i2c_client *client;
> +};
Not used anywhere and pointless.
> +
> +static const struct i2c_device_id acbel_fsg032_id[] = {
> + { "acbel_fsg032" },
> + {}
> +};
> +
> +static struct pmbus_driver_info acbel_fsg032_info = {
> + .pages = 1,
> + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN |
> + PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT |
> + PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 |
> + PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_VOUT |
> + PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_TEMP |
> + PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_FAN12,
> +};
> +
> +static int acbel_fsg032_probe(struct i2c_client *client)
> +{
> + struct acbel_fsg032 *psu;
> + u8 buf[I2C_SMBUS_BLOCK_MAX + 1];
> + struct device *dev = &client->dev;
> + int rc;
> +
> + rc = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
> + if (rc < 0) {
> + dev_err(dev, "Failed to read PMBUS_MFR_ID\n");
> + return rc;
> + }
> + if (strncmp(buf, "ACBEL", 5)) {
> + buf[rc] = '\0';
> + dev_err(dev, "Manufacturer '%s' not supported\n", buf);
> + return -ENODEV;
> + }
> +
> + rc = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
> + if (rc < 0) {
> + dev_err(dev, "Failed to read PMBUS_MFR_MODEL\n");
> + return rc;
> + }
> +
> + if (strncmp(buf, "FSG032", 6)) {
> + buf[rc] = '\0';
> + dev_err(dev, "Model '%s' not supported\n", buf);
> + return -ENODEV;
> + }
> +
> + rc = pmbus_do_probe(client, &acbel_fsg032_info);
> + if (rc)
> + return rc;
> + /*
> + * Don't fail the probe if there isn't enough memory for debugfs.
> + */
> + psu = devm_kzalloc(&client->dev, sizeof(*psu), GFP_KERNEL);
> + if (!psu)
> + return 0;
'psu is not used anywhere and allocating it is pointless. I am quite sure
that I did bring that up before.
Guenter
