On Mon, Apr 3, 2023 at 1:56 PM Chris Morgan <macroalpha82@xxxxxxxxx> wrote:
>
> On Mon, Apr 03, 2023 at 01:50:52PM +0300, Cristian Ciocaltea wrote:
> > Add the necessary DT changes for the Rock 5B board to enable support for
> > the PWM controlled heat sink fan.
>
> Honest question, but should we be adding this to the board file if not
> every device has a PWM fan (they all have the socket for the fan, but
> not the fan)? For example I have a passively cooled case that doesn't
> include a fan.
Active cooling should be set up to take effect before throttling. If
it is there great, (especially if it has feedback), if it doesn't
exist it really doesn't affect anything because the throttling will
kick in as necessary.
>
> Thank you,
> Chris Morgan.
>
> >
> > Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts | 12 ++++++++++++
> > 1 file changed, 12 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> > index 95805cb0adfa..bd74d9da2c17 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> > +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> > @@ -17,6 +17,14 @@ chosen {
> > stdout-path = "serial2:1500000n8";
> > };
> >
> > + fan: pwm-fan {
> > + compatible = "pwm-fan";
> > + cooling-levels = <0 95 145 195 255>;
> > + fan-supply = <&vcc5v0_sys>;
> > + pwms = <&pwm1 0 50000 0>;
> > + #cooling-cells = <2>;
> > + };
> > +
> > vcc5v0_sys: vcc5v0-sys-regulator {
> > compatible = "regulator-fixed";
> > regulator-name = "vcc5v0_sys";
> > @@ -27,6 +35,10 @@ vcc5v0_sys: vcc5v0-sys-regulator {
> > };
> > };
> >
> > +&pwm1 {
> > + status = "okay";
> > +};
> > +
> > &sdhci {
> > bus-width = <8>;
> > no-sdio;
> > --
> > 2.40.0
> >
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
