Hello,
with the attached patch some sensor information is shown
with Asus Pro A520M-C II/CSM:
dmesg |grep nct6775
[ 23.765392] nct6775: Found NCT6798D or compatible chip at 0x2e:0x290
And sensors now shows:
nct6798-isa-0290
Adapter: ISA adapter
in0: 312.00 mV (min = +0.00 V, max = +1.74 V)
in1: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM
in2: 3.42 V (min = +0.00 V, max = +0.00 V) ALARM
in3: 3.38 V (min = +0.00 V, max = +0.00 V) ALARM
in4: 1.03 V (min = +0.00 V, max = +0.00 V) ALARM
in5: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM
in6: 200.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in7: 3.42 V (min = +0.00 V, max = +0.00 V) ALARM
in8: 3.28 V (min = +0.00 V, max = +0.00 V) ALARM
in9: 920.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in10: 512.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in11: 504.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in12: 1.03 V (min = +0.00 V, max = +0.00 V) ALARM
in13: 256.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in14: 1.47 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 0 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 355 RPM (min = 0 RPM)
fan7: 0 RPM (min = 0 RPM)
SYSTIN: +25.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
CPUTIN: +26.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
AUXTIN0: +97.0°C sensor = thermistor
AUXTIN1: +25.0°C sensor = thermistor
AUXTIN2: +25.0°C sensor = thermistor
AUXTIN3: +1.0°C sensor = thermistor
PECI Agent 0 Calibration: +26.0°C
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
TSI0_TEMP: +27.9°C
intrusion0: ALARM
intrusion1: OK
beep_enable: disabled
The patch is against 6.2.5.
Thank you very much for all the hwmon work!
Regards,
Holger
--- linux-6.2.5/drivers/hwmon/nct6775-platform.c.orig 2023-03-11 13:50:50.000000000 +0100
+++ linux-6.2.5/drivers/hwmon/nct6775-platform.c 2023-03-11 20:46:02.898764320 +0100
@@ -1052,6 +1052,7 @@
static struct platform_device *pdev[2];
static const char * const asus_wmi_boards[] = {
+ "Pro A520M-C II",
"PRO H410T",
"ProArt B550-CREATOR",
"ProArt X570-CREATOR WIFI",
