On Tue, Feb 07, 2023 at 01:02:40PM +0100, Naresh Solanki wrote: > From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx> > > Implement PMBUS irq handler. > > Signed-off-by: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx> > Signed-off-by: Naresh Solanki <Naresh.Solanki@xxxxxxxxxxxxx> > --- > drivers/hwmon/pmbus/pmbus.h | 2 +- > drivers/hwmon/pmbus/pmbus_core.c | 85 ++++++++++++++++++++++++++++++++ > 2 files changed, 86 insertions(+), 1 deletion(-) > > diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h > index 713ea7915425..11e84e141126 100644 > --- a/drivers/hwmon/pmbus/pmbus.h > +++ b/drivers/hwmon/pmbus/pmbus.h > @@ -26,7 +26,7 @@ enum pmbus_regs { > > PMBUS_CAPABILITY = 0x19, > PMBUS_QUERY = 0x1A, > - > + PMBUS_SMBALERT_MASK = 0x1B, > PMBUS_VOUT_MODE = 0x20, > PMBUS_VOUT_COMMAND = 0x21, > PMBUS_VOUT_TRIM = 0x22, > diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c > index 5ccae8126a56..d5403baad60a 100644 > --- a/drivers/hwmon/pmbus/pmbus_core.c > +++ b/drivers/hwmon/pmbus/pmbus_core.c > @@ -3093,6 +3093,85 @@ static int pmbus_regulator_register(struct pmbus_data *data) > } > #endif > > +static int pmbus_write_smbalert_mask(struct i2c_client *client, u8 page, u8 reg, u8 val) > +{ > + int err; > + > + err = pmbus_check_word_register(client, page, reg | (val << 8)); > + if (err) > + return err; I am not convinced that this is necessary. The next command will return an error anyway if the register or the specific mask is not supported, so what is the point ? > + > + return pmbus_write_word_data(client, page, PMBUS_SMBALERT_MASK, reg | (val << 8)); > +} > + > +static irqreturn_t pmbus_fault_handler(int irq, void *pdata) > +{ > + struct pmbus_data *data = pdata; > + struct i2c_client *client = to_i2c_client(data->dev); > + int i, status; > + > + mutex_lock(&data->update_lock); > + for (i = 0; i < data->info->pages; i++) { > + status = pmbus_read_status_word(client, i); > + if (status < 0) { > + mutex_unlock(&data->update_lock); > + return status; > + } > + > + if (status & ~(PB_STATUS_OFF | PB_STATUS_BUSY | PB_STATUS_POWER_GOOD_N)) > + pmbus_clear_fault_page(client, i); > + } > + mutex_unlock(&data->update_lock); > + > + return IRQ_HANDLED; > +} > + > +static int pmbus_irq_setup(struct i2c_client *client, struct pmbus_data *data) > +{ > + struct device *dev = &client->dev; > + const struct pmbus_status_category *cat; > + const struct pmbus_status_assoc *bit; > + int i, j, err, ret, func; > + u8 mask; > + u8 misc_status[] = {PMBUS_STATUS_CML, PMBUS_STATUS_OTHER, PMBUS_STATUS_MFR_SPECIFIC, > + PMBUS_STATUS_FAN_12, PMBUS_STATUS_FAN_34}; static const u8 ... > + > + for (i = 0; i < data->info->pages; i++) { > + func = data->info->func[i]; > + > + for (j = 0; j < ARRAY_SIZE(pmbus_status_flag_map); j++) { > + cat = &pmbus_status_flag_map[j]; > + if (!(func & cat->func)) > + continue; > + mask = 0; > + for (bit = cat->bits; bit->pflag; bit++) > + mask |= bit->pflag; > + > + err = pmbus_write_smbalert_mask(client, i, cat->reg, ~mask); > + if (err) > + dev_err_once(dev, "Failed to set smbalert for reg 0x%02x\n", > + cat->reg); dev_err implies an error. This is ignored and thus not an error. On top of that, not all chips support PMBUS_SMBALERT_MASK. All of those would see this message. We can't have that. At best make it a dev_dbg. > + } > + > + for (j = 0; j < ARRAY_SIZE(misc_status); j++) { > + err = pmbus_write_smbalert_mask(client, i, misc_status[j], 0xff); > + if (err) > + dev_err_once(dev, "Failed to set smbalert for reg 0x%02x\n", > + misc_status[j]); We definitely can't have a message here; that would fire for almost every chip. > + } > + } > + > + /* Register notifiers - can fail if IRQ is not given */ If there is no irq, what is the point of executing this code in the first place ? No, wait, in that case the function isn't called in the first place. I think the comment doesn't add any value and is just confusing. > + ret = devm_request_threaded_irq(dev, client->irq, NULL, pmbus_fault_handler, 0, > + "pmbus-irq", data); > + if (ret) { Why both "err" and "ret" ? > + dev_warn(dev, "IRQ disabled %d\n", ret); The calling code aborts, so this should be dev_err() and say something better than "IRQ disabled"; It should be something like "failed to request irq". > + return ret; > + } > + > + return 0; > +} > + > static struct dentry *pmbus_debugfs_dir; /* pmbus debugfs directory */ > > #if IS_ENABLED(CONFIG_DEBUG_FS) > @@ -3455,6 +3534,12 @@ int pmbus_do_probe(struct i2c_client *client, struct pmbus_driver_info *info) > if (ret) > return ret; > > + if (client->irq > 0) { > + ret = pmbus_irq_setup(client, data); > + if (ret) > + return ret; > + } > + I think it would be better to have the check in pmbus_irq_setup(): pmbus_irq_setup() { if (!client->irq) return 0; ... } and here ret = pmbus_irq_setup(client, data); if (ret) return ret; > ret = pmbus_init_debugfs(client, data); > if (ret) > dev_warn(dev, "Failed to register debugfs\n");