This patch adds documentation for the NXP MC34VR500 PMIC. Signed-off-by: Mario Kicherer <dev@xxxxxxxxxxxx> --- Documentation/hwmon/mc34vr500.rst | 32 +++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 Documentation/hwmon/mc34vr500.rst diff --git a/Documentation/hwmon/mc34vr500.rst b/Documentation/hwmon/mc34vr500.rst new file mode 100644 index 000000000000..5a8e0cbf4dbf --- /dev/null +++ b/Documentation/hwmon/mc34vr500.rst @@ -0,0 +1,32 @@ +Kernel driver mc34vr500 +======================= + +Supported Chips: + + * NXP MC34VR500 + + Prefix: 'mc34vr500' + + Addresses scanned: I2C 0x08 + + Datasheet: https://www.nxp.com/docs/en/data-sheet/MC34VR500.pdf + +Author: Mario Kicherer <dev@xxxxxxxxxxxx> + +Description +----------- + +This driver implements initial support for the NXP MC34VR500 PMIC. The MC34VR500 +monitors the temperature, input voltage and output currents and provides +corresponding alarms. For the temperature, the chip can send interrupts if +the temperature rises above one of the following values: 110°, 120°, 125° and +130° Celsius. For the input voltage, an interrupt is sent when the voltage +drops below 2.8V. + +Currently, this driver only implements the input voltage and temperature +alarms. The interrupts are mapped as follows: + +<= 2.8V -> in_min_alarm +>110°c -> temp_max_alarm +>120°c -> temp_crit_alarm +>130°c -> temp_emergency_alarm -- 2.34.1
