Fix kernel-doc warnings:
drivers/hwmon/emc2305.c:62: warning: Cannot understand * @cdev: cooling device;
on line 62 - I thought it was a doc line
drivers/hwmon/emc2305.c:89: warning: Cannot understand * @client: i2c client;
on line 89 - I thought it was a doc line
and drop ';' at end of each struct member line.
Signed-off-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
Cc: Jean Delvare <jdelvare@xxxxxxxx>
Cc: Guenter Roeck <linux@xxxxxxxxxxxx>
Cc: linux-hwmon@xxxxxxxxxxxxxxx
---
drivers/hwmon/emc2305.c | 24 +++++++++++++-----------
1 file changed, 13 insertions(+), 11 deletions(-)
diff -- a/drivers/hwmon/emc2305.c b/drivers/hwmon/emc2305.c
--- a/drivers/hwmon/emc2305.c
+++ b/drivers/hwmon/emc2305.c
@@ -59,10 +59,11 @@ static const struct i2c_device_id emc230
MODULE_DEVICE_TABLE(i2c, emc2305_ids);
/**
- * @cdev: cooling device;
- * @curr_state: cooling current state;
- * @last_hwmon_state: last cooling state updated by hwmon subsystem;
- * @last_thermal_state: last cooling state updated by thermal subsystem;
+ * struct emc2305_cdev_data - device-specific cooling device state
+ * @cdev: cooling device
+ * @cur_state: cooling current state
+ * @last_hwmon_state: last cooling state updated by hwmon subsystem
+ * @last_thermal_state: last cooling state updated by thermal subsystem
*
* The 'last_hwmon_state' and 'last_thermal_state' fields are provided to support fan low limit
* speed feature. The purpose of this feature is to provides ability to limit fan speed
@@ -86,13 +87,14 @@ struct emc2305_cdev_data {
};
/**
- * @client: i2c client;
- * @hwmon_dev: hwmon device;
- * @max_state: maximum cooling state of the cooling device;
- * @pwm_num: number of PWM channels;
- * @pwm_separate: separate PWM settings for every channel;
- * @pwm_min: array of minimum PWM per channel;
- * @cdev_data: array of cooling devices data;
+ * struct emc2305_data - device-specific data
+ * @client: i2c client
+ * @hwmon_dev: hwmon device
+ * @max_state: maximum cooling state of the cooling device
+ * @pwm_num: number of PWM channels
+ * @pwm_separate: separate PWM settings for every channel
+ * @pwm_min: array of minimum PWM per channel
+ * @cdev_data: array of cooling devices data
*/
struct emc2305_data {
struct i2c_client *client;
