On 1/10/23 14:48, Denis Pauk wrote:
New ASUS B650/B660/X670 boards firmware have not exposed WMI monitoring
GUID and entrypoint method WMBD could be implemented for different device
UID.
Implement the direct call to entrypoint method for monitoring the device
UID of B550/X570 boards.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204807
Signed-off-by: Denis Pauk <pauk.denis@xxxxxxxxx>
Co-developed-by: Ahmad Khalifa <ahmad@xxxxxxxxxx>
Signed-off-by: Ahmad Khalifa <ahmad@xxxxxxxxxx>
---
Changes:
v1:
Rename each_port_arg to each_device_arg
Rename nct6775_find_asus_acpi to nct6775_asuswmi_device_match
Remove unrequired return -EEXIST, and iterate whole list of devices
Make asus_acpi_dev static
v2:
Restore break iteration logic in nct6775_asuswmi_device_match
Add config check if ACPI disabled and acpi_device_* are undefined
Pass device_id as data parameter of acpi_bus_for_each_dev
Also, the use of a static variable makes me wonder: would asus_acpi_dev
be the same for both chips if there are two Super-IO chips in the system ?
Available B550/X570/B650/B660/X670 firmwares have contained only one device
with WMBD method and provided proxy only to 0x0270 port. Difference between
board generation is only in name of the such device.
drivers/hwmon/Kconfig | 2 +-
drivers/hwmon/nct6775-platform.c | 97 ++++++++++++++++++++++----------
2 files changed, 69 insertions(+), 30 deletions(-)
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 3176c33af6c6..300ce8115ce4 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1516,7 +1516,7 @@ config SENSORS_NCT6775_CORE
config SENSORS_NCT6775
tristate "Platform driver for Nuvoton NCT6775F and compatibles"
depends on !PPC
- depends on ACPI_WMI || ACPI_WMI=n
+ depends on ACPI || ACPI=n
select HWMON_VID
select SENSORS_NCT6775_CORE
help
diff --git a/drivers/hwmon/nct6775-platform.c b/drivers/hwmon/nct6775-platform.c
index bf43f73dc835..082f48785999 100644
--- a/drivers/hwmon/nct6775-platform.c
+++ b/drivers/hwmon/nct6775-platform.c
@@ -17,7 +17,6 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
-#include <linux/wmi.h>
0-day reported various errors. I suspect those are seen with CONFIG_ACPI=n.
Have you tried the build reported as problematic ?
I get
drivers/hwmon/nct6775-platform.c:122:28: error: ‘asus_acpi_dev’ defined but not used [-Werror=unused-variable]
122 | static struct acpi_device *asus_acpi_dev;
if I try to build nct6775-platform.o with W=1 and CONFIG_ACPI=n.
Overall the #ifdefs in the driver get a bit out of hand. I think it
may be time to consolidate that. Not necessarily now, but sometime soon.
Guenter
#include "nct6775.h"
@@ -107,40 +106,48 @@ struct nct6775_sio_data {
void (*sio_exit)(struct nct6775_sio_data *sio_data);
};
-#define ASUSWMI_MONITORING_GUID "466747A0-70EC-11DE-8A39-0800200C9A66"
+#define ASUSWMI_METHOD "WMBD"
#define ASUSWMI_METHODID_RSIO 0x5253494F
#define ASUSWMI_METHODID_WSIO 0x5753494F
#define ASUSWMI_METHODID_RHWM 0x5248574D
#define ASUSWMI_METHODID_WHWM 0x5748574D
#define ASUSWMI_UNSUPPORTED_METHOD 0xFFFFFFFE
+#define ASUSWMI_DEVICE_HID "PNP0C14"
+#define ASUSWMI_DEVICE_UID "ASUSWMI"
+
+/*
+ * ASUS boards have only one device with WMI "WMBD" method and have provided
+ * access to only one SuperIO chip at 0x0290.
+ */
+static struct acpi_device *asus_acpi_dev;
static int nct6775_asuswmi_evaluate_method(u32 method_id, u8 bank, u8 reg, u8 val, u32 *retval)
{
-#if IS_ENABLED(CONFIG_ACPI_WMI)
+#if IS_ENABLED(CONFIG_ACPI)
+ acpi_handle handle = acpi_device_handle(asus_acpi_dev);
u32 args = bank | (reg << 8) | (val << 16);
- struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
- struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+ struct acpi_object_list input;
+ union acpi_object params[3];
+ unsigned long long result;
acpi_status status;
- union acpi_object *obj;
- u32 tmp = ASUSWMI_UNSUPPORTED_METHOD;
-
- status = wmi_evaluate_method(ASUSWMI_MONITORING_GUID, 0,
- method_id, &input, &output);
+ params[0].type = ACPI_TYPE_INTEGER;
+ params[0].integer.value = 0;
+ params[1].type = ACPI_TYPE_INTEGER;
+ params[1].integer.value = method_id;
+ params[2].type = ACPI_TYPE_BUFFER;
+ params[2].buffer.length = sizeof(args);
+ params[2].buffer.pointer = (void *)&args;
+ input.count = 3;
+ input.pointer = params;
+
+ status = acpi_evaluate_integer(handle, ASUSWMI_METHOD, &input, &result);
if (ACPI_FAILURE(status))
return -EIO;
- obj = output.pointer;
- if (obj && obj->type == ACPI_TYPE_INTEGER)
- tmp = obj->integer.value;
-
if (retval)
- *retval = tmp;
-
- kfree(obj);
+ *retval = (u32)result & 0xFFFFFFFF;
- if (tmp == ASUSWMI_UNSUPPORTED_METHOD)
- return -ENODEV;
return 0;
#else
return -EOPNOTSUPP;
@@ -1099,6 +1106,46 @@ static const char * const asus_wmi_boards[] = {
"TUF GAMING Z490-PLUS (WI-FI)",
};
+#if IS_ENABLED(CONFIG_ACPI)
+/*
+ * Callback for acpi_bus_for_each_dev() to find the right device
+ * by _UID and _HID and return 1 to stop iteration.
+ */
+static int nct6775_asuswmi_device_match(struct device *dev, void *data)
+{
+ struct acpi_device *adev = to_acpi_device(dev);
+ const char *uid = acpi_device_uid(adev);
+ const char *hid = acpi_device_hid(adev);
+
+ if (hid && !strcmp(hid, ASUSWMI_DEVICE_HID) &&
+ uid && !strcmp(uid, data)) {
+ asus_acpi_dev = adev;
+ return 1;
+ }
+
+ return 0;
+}
+#endif
+
+static enum sensor_access nct6775_determine_access(const char *device_uid)
+{
+#if IS_ENABLED(CONFIG_ACPI)
+ u8 tmp;
+
+ acpi_bus_for_each_dev(nct6775_asuswmi_device_match, (void *)device_uid);
+ if (!asus_acpi_dev)
+ return access_direct;
+
+ /* if reading chip id via ACPI succeeds, use WMI "WMBD" method for access */
+ if (!nct6775_asuswmi_read(0, NCT6775_PORT_CHIPID, &tmp) && tmp) {
+ pr_debug("Using Asus WMBD method of %s to access %#x chip.\n", device_uid, tmp);
+ return access_asuswmi;
+ }
+#endif
+
+ return access_direct;
+}
+
static int __init sensors_nct6775_platform_init(void)
{
int i, err;
@@ -1109,7 +1156,6 @@ static int __init sensors_nct6775_platform_init(void)
int sioaddr[2] = { 0x2e, 0x4e };
enum sensor_access access = access_direct;
const char *board_vendor, *board_name;
- u8 tmp;
err = platform_driver_register(&nct6775_driver);
if (err)
@@ -1122,15 +1168,8 @@ static int __init sensors_nct6775_platform_init(void)
!strcmp(board_vendor, "ASUSTeK COMPUTER INC.")) {
err = match_string(asus_wmi_boards, ARRAY_SIZE(asus_wmi_boards),
board_name);
- if (err >= 0) {
- /* if reading chip id via WMI succeeds, use WMI */
- if (!nct6775_asuswmi_read(0, NCT6775_PORT_CHIPID, &tmp) && tmp) {
- pr_info("Using Asus WMI to access %#x chip.\n", tmp);
- access = access_asuswmi;
- } else {
- pr_err("Can't read ChipID by Asus WMI.\n");
- }
- }
+ if (err >= 0)
+ access = nct6775_determine_access(ASUSWMI_DEVICE_UID);
}
/*
base-commit: b0587c87abc891e313d63946ff8c9f4939d1ea1a
