Added the ability to specify the value of the shunt resistor in the device tree instead of assuming it is 1 milliOhm. Would be good to backport as well Changes since v2: - Remove newline - Combined overflow fix with "Allow setting shunt resistor" commit - Add description to "Add devicetree match table" - Add fix for unhandled error case in ltc2945_value_store - Use imperative in descriptions - Remove unneeded overflow check from ltc2945_reg_to_val - Fix up DIV_ROUND_CLOSEST_ULL calls, per docs divisor should be 32-bit - Split one DIV_ROUND_CLOSEST_ULL change into separate commit per Guenter Roeck's comment Changes since v1: - Add devicetree match table - Add kerneldoc for the ltc2945_data struct - Cleanup excesive comments about the shunt resistor - Switch to device_property_read_u32() Cormier, Jonathan (1): dt-bindings: hwmon: adi,ltc2945: Add binding John Pruitt (1): hwmon: ltc2945: Allow setting shunt resistor .../bindings/hwmon/adi,ltc2945.yaml | 50 +++++++++++ drivers/hwmon/ltc2945.c | 86 ++++++++++++++----- 2 files changed, 115 insertions(+), 21 deletions(-) create mode 100644 Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml -- 2.25.1
