Merry Christmas, a user reported strange sensors values when using the ftsteutates driver on kernel 6.1. A bit of research revealed that the drivers was omiting any scaling of the measurements, causing strange sensor values being reported with the sensors command. This was likely done since when the ftsteutates driver was still out-of-tree, all scaling was done by libsensors with an custom config file provided by Fujitsu. The first patch fixes this issue. The seconds patch converts the driver to use the modern *_with_info() API and also adds support for fanX_fault and pwmX_auto_channels_temp attributes. Since the behaviour of the pwmX_auto_channels_temp attributes is a bit special with the teutates BMC, it is added to the drivers documentation. The last patch is a minor improvement regarding the watchdog registration. All changes where tested on a Fujitsu DS3401-B1 and apppear to work. Armin Wolf (3): hwmon: (ftsteutates) Fix scaling of measurements hwmon: (ftsteutates) Convert to devm_hwmon_device_register_with_info() hwmon: (ftsteutates) Use devm_watchdog_register_device() Documentation/hwmon/ftsteutates.rst | 9 + drivers/hwmon/ftsteutates.c | 551 ++++++++++------------------ 2 files changed, 213 insertions(+), 347 deletions(-) -- 2.30.2
