The definitions of 'EMC2305_REG_PRODUCT_ID' and 'EMC2305_REG_DEVICE' are
both '0xfd', they actually return the same value, but the values returned
by emc2301/2/3/5 are different, so probe emc2301/2/3 will fail, This patch
fixes that.
Signed-off-by: Xingjiang Qiao <nanpuyue@xxxxxxxxx>
---
drivers/hwmon/emc2305.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/drivers/hwmon/emc2305.c b/drivers/hwmon/emc2305.c
index aa1f25add0b6..9a78ca22541e 100644
--- a/drivers/hwmon/emc2305.c
+++ b/drivers/hwmon/emc2305.c
@@ -16,7 +16,6 @@ static const unsigned short
emc2305_normal_i2c[] = { 0x27, 0x2c, 0x2d, 0x2e, 0x2f, 0x4c, 0x4d, I2C_CLIENT_END };
#define EMC2305_REG_DRIVE_FAIL_STATUS 0x27
-#define EMC2305_REG_DEVICE 0xfd
#define EMC2305_REG_VENDOR 0xfe
#define EMC2305_FAN_MAX 0xff
#define EMC2305_FAN_MIN 0x00
@@ -524,7 +523,7 @@ static int emc2305_probe(struct i2c_client *client, const struct i2c_device_id *
struct device *dev = &client->dev;
struct emc2305_data *data;
struct emc2305_platform_data *pdata;
- int vendor, device;
+ int vendor;
int ret;
int i;
@@ -535,10 +534,6 @@ static int emc2305_probe(struct i2c_client *client, const struct i2c_device_id *
if (vendor != EMC2305_VENDOR)
return -ENODEV;
- device = i2c_smbus_read_byte_data(client, EMC2305_REG_DEVICE);
- if (device != EMC2305_DEVICE)
- return -ENODEV;
-
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
--
2.38.1
