From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
Add get_status for pmbus_regulator_ops.
---
Changes:
- use lock throughout the function
- Avoid line continuation upto 100 column
- Optimize use of & and | operator
- Check for VOUT, IOUT, TEMPERATURE bit in status word before checking
respective status register for fault.
- Report regulator current status.
- Utilize get_error_flag to check for regulator errors.
- Check for return value of function get_error_flag
- Use function pmbus_regulator_get_error_flags directly
Signed-off-by: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
Signed-off-by: Naresh Solanki <Naresh.Solanki@xxxxxxxxxxxxx>
---
drivers/hwmon/pmbus/pmbus_core.c | 44 ++++++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 20ca26e19db7..95e95783972a 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -2855,6 +2855,49 @@ static int pmbus_regulator_get_error_flags(struct regulator_dev *rdev, unsigned
return 0;
}
+static int pmbus_regulator_get_status(struct regulator_dev *rdev)
+{
+ struct device *dev = rdev_get_dev(rdev);
+ struct i2c_client *client = to_i2c_client(dev->parent);
+ struct pmbus_data *data = i2c_get_clientdata(client);
+ u8 page = rdev_get_id(rdev);
+ int status, ret;
+
+ mutex_lock(&data->update_lock);
+ status = pmbus_get_status(client, page, PMBUS_STATUS_WORD);
+ if (status < 0) {
+ ret = status;
+ goto unlock;
+ }
+
+ if (status & PB_STATUS_OFF) {
+ ret = REGULATOR_STATUS_OFF;
+ goto unlock;
+ }
+
+ /* If regulator is ON & reports power good then return ON */
+ if (!(status & PB_STATUS_POWER_GOOD_N)) {
+ ret = REGULATOR_STATUS_ON;
+ goto unlock;
+ }
+
+ ret = pmbus_regulator_get_error_flags(rdev, &status);
+ if (ret)
+ goto unlock;
+
+ if (status & (REGULATOR_ERROR_UNDER_VOLTAGE | REGULATOR_ERROR_OVER_CURRENT |
+ REGULATOR_ERROR_REGULATION_OUT | REGULATOR_ERROR_FAIL | REGULATOR_ERROR_OVER_TEMP)) {
+ ret = REGULATOR_STATUS_ERROR;
+ goto unlock;
+ }
+
+ ret = REGULATOR_STATUS_UNDEFINED;
+
+unlock:
+ mutex_unlock(&data->update_lock);
+ return ret;
+}
+
static int pmbus_regulator_get_low_margin(struct i2c_client *client, int page)
{
struct pmbus_data *data = i2c_get_clientdata(client);
@@ -2995,6 +3038,7 @@ const struct regulator_ops pmbus_regulator_ops = {
.disable = pmbus_regulator_disable,
.is_enabled = pmbus_regulator_is_enabled,
.get_error_flags = pmbus_regulator_get_error_flags,
+ .get_status = pmbus_regulator_get_status,
.get_voltage = pmbus_regulator_get_voltage,
.set_voltage = pmbus_regulator_set_voltage,
.list_voltage = pmbus_regulator_list_voltage,
base-commit: 2c71b3246ec3246522e8cb7c8191dc7a5d62cc70
--
2.37.3
