Hello, this is a follow-up to the comments I got from Guenter on v1 of my patch from [0] titled: "hwmon: (jc42) Restore the min/max/critical temperatures on resume" There Guenter suggested: "The best solution would probably be to convert the driver to use regmap and let regmap handle the caching". That's the goal of this series - in addition to fixing the original resume issue (see patch #3 - which was the reason for v1 of this series). Changes since v1 at [0]: - marked as RFC - added patches for regmap (patch #1) and regcache (patch #2) conversion - patch #3 has been updated to use regcache for restoring the register values during system resume (this was originally patch 1/1) - added another patch to remove caching of the temperature register [0] https://lore.kernel.org/linux-hwmon/20221019214108.220319-1-martin.blumenstingl@xxxxxxxxxxxxxx/ Martin Blumenstingl (4): hwmon: (jc42) Convert register access to use an I2C regmap hwmon: (jc42) Convert to regmap's built-in caching hwmon: (jc42) Restore the min/max/critical temperatures on resume hwmon: (jc42) Don't cache the temperature register drivers/hwmon/Kconfig | 1 + drivers/hwmon/jc42.c | 224 +++++++++++++++++++++++------------------- 2 files changed, 125 insertions(+), 100 deletions(-) -- 2.38.1
