Re: [PATCH v3 12/19] hwmon: (mr75203) fix voltage equation for negative source input

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 8/31/2022 3:04 PM, Andy Shevchenko wrote:
On Tue, Aug 30, 2022 at 07:22:05PM +0000, Eliav Farber wrote:
According to Moortec Embedded Voltage Monitor (MEVM) series 3 data sheet,
the minimum input signal is -100mv and maximum input signal is +1000mv.
When n was small enough, such that PVT_N_CONST * n < PVT_R_CONST it
resulted in n overflowing to a very large number (since n is u32 type).

This change fixes the problem by casting n to long and replacing shift
right with div operation.

Fixes tag?

For v4 I modified the commit message to (hopefully) be more
understandable:

"
According to Moortec Embedded Voltage Monitor (MEVM) series 3 data
sheet, the minimum input signal is -100mv and maximum input signal
is +1000mv.

On 64 bit machines sizeof(u32) = 4 and sizeof(long) = 8.
So when measuring a negative input and n is small enough, such that
PVT_N_CONST * n < PVT_R_CONST, it results in n overflowing to a very
large number which is not negative (because 4 MSB bytes of val are 0).

This change fixes the sign problem and supports negative values by
casting n to long and replacing shift right with div operation.
"


...

              n &= SAMPLE_DATA_MSK;
+

Unrelated change.

Removed.

--
Thanks, Eliav



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux