On Tue, Aug 30, 2022 at 07:22:11PM +0000, Eliav Farber wrote:
> This change adds debugfs to read and write temperature sensor coefficients
> - g, h, j and cal5.
>
> The coefficients can vary between product and product, so it can be very
> useful to be able to modify them on the fly during the calibration
> process.
>
> e.g.:
>
> cat /sys/kernel/debug/940f23d0000.pvt/ts_coeff_cal5
> 4096
>
> echo 83000 > sys/kernel/debug/940f23d0000.pvt/ts_coeff_g
...
> + pvt->dbgfs_dir = debugfs_create_dir(dev_name(dev), NULL);
> + if (!pvt->dbgfs_dir) {
> + dev_err(dev, "Failed to create dbgfs_dir\n");
> + return -EINVAL;
> + }
No, just don't check the return value of debugfs API calls.
> + debugfs_create_file("ts_coeff_h", 0644, pvt->dbgfs_dir, pvt,
> + &pvt_ts_coeff_h_fops);
> + debugfs_create_file("ts_coeff_g", 0644, pvt->dbgfs_dir, pvt,
> + &pvt_ts_coeff_g_fops);
> + debugfs_create_file("ts_coeff_j", 0644, pvt->dbgfs_dir, pvt,
> + &pvt_ts_coeff_j_fops);
> + debugfs_create_file("ts_coeff_cal5", 0644, pvt->dbgfs_dir, pvt,
> + &pvt_ts_coeff_cal5_fops);
debugfs has helpers for POD types, use them and shrink your code by ~80%.
...
> + ret = devm_add_action_or_reset(dev, devm_pvt_ts_dbgfs_remove, pvt);
> + if (ret) {
> + dev_err(dev, "failed to add action to remove pvt dbgfs (%d)\n",
> + ret);
> + return ret;
> + }
> +
> + return 0;
return devm_add_...
--
With Best Regards,
Andy Shevchenko
