On Mi, 2022-08-31 at 12:43 +0300, Farber, Eliav wrote: > On 8/31/2022 11:21 AM, Philipp Zabel wrote: > > On Di, 2022-08-30 at 19:21 +0000, Eliav Farber wrote: > > > Change "reset" property to be optional instead of required, for SOCs > > > that > > > don't support a reset controller. > > > > > > Signed-off-by: Eliav Farber <farbere@xxxxxxxxxx> > > > --- > > > V3 -> v2: > > > - Change "reset" property to be optional instead of adding new > > > "reset-control-skip" property. > > > > > > Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml | 1 - > > > 1 file changed, 1 deletion(-) > > > > > > diff --git > > > a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml > > > b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml > > > index 6abde48b746e..2ec4b9da4b92 100644 > > > --- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml > > > +++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml > > > @@ -49,7 +49,6 @@ required: > > > - reg > > > - reg-names > > > - clocks > > > - - resets > > > > Is this just for mr76006? Or does mr75203 work without reset as well? > > > > If it is the former, maybe a new compatible should be added and resets > > should be kept required > > mr75203 also works without a reset. > As I replied in PATCH v3 14/19, series 5/6 is relevant only for the > temperature sensor. > The “reset” property is relevant to the controller. In that case, Reviewed-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> regards Philipp
