Add optional "moortec,vm-active-channels" property to define the number
of active channels per VM.
This shall be useful to avoid exposing sysfs for reading inputs that are
not connected to any voltage source.
Signed-off-by: Eliav Farber <farbere@xxxxxxxxxx>
---
V3 -> V2:
- Add "moortec" prefix to property name.
- Add explanation why this change is needed.
.../devicetree/bindings/hwmon/moortec,mr75203.yaml | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
index 2ec4b9da4b92..69cc6caceb2c 100644
--- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
+++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
@@ -44,6 +44,16 @@ properties:
"#thermal-sensor-cells":
const: 1
+ moortec,vm-active-channels:
+ description:
+ moortec,vm-active-channels defines the number of channels per VM that are
+ actually used and are connected to some source.
+ Number of values in the array should be the number of VMs.
+ A value of 0 means that the entire VM sensor is nou used.
+ maximum: 16
+ default: 16
+ $ref: /schemas/types.yaml#definitions/uint8-array
+
required:
- compatible
- reg
@@ -65,5 +75,6 @@ examples:
intel,vm-map = [03 01 04 ff ff];
clocks = <&osc0>;
resets = <&rcu0 0x40 7>;
+ moortec,vm-active-channels = <0x10 0x05>;
#thermal-sensor-cells = <1>;
};
--
2.37.1
