On 8/22/2022 7:31 PM, Guenter Roeck wrote:
It should not be necessary to provide explicit default values for any
of the
series. Yes, default values can be overwritten with explicit coefficient
properties, but it should not be necessary to provide those if the
defaults
are used. So I would expect separate compatible properties for each of
the
supported series plus separate coefficient properties.
I added a "moortec,ts-series" so that user will not need to provide all
4 coefficients.
The values of the "moortec,ts-series" can be 5 (default) or 6.
I didn't do it as a compatible property because the the driver is for
the Moortec controller (mr75203) while series 5 or 6 are only relevant
for the thermal sensor (mr74137).
--
Thanks, Eliav
