Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.
Add mod_devicetable.h include.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/hwmon/Kconfig | 2 +-
drivers/hwmon/pwm-fan.c | 50 +++++++++++++++++++++--------------------
2 files changed, 27 insertions(+), 25 deletions(-)
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index e70d9614bec2..58912a5c5de8 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1613,7 +1613,7 @@ source "drivers/hwmon/pmbus/Kconfig"
config SENSORS_PWM_FAN
tristate "PWM fan"
- depends on (PWM && OF) || COMPILE_TEST
+ depends on PWM || COMPILE_TEST
depends on THERMAL || THERMAL=n
help
If you say yes here you get support for fans connected to PWM lines.
diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c
index 6c08551d8d14..9ce9f2543861 100644
--- a/drivers/hwmon/pwm-fan.c
+++ b/drivers/hwmon/pwm-fan.c
@@ -9,10 +9,11 @@
#include <linux/hwmon.h>
#include <linux/interrupt.h>
+#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/mutex.h>
-#include <linux/of.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/pwm.h>
#include <linux/regulator/consumer.h>
#include <linux/sysfs.h>
@@ -25,7 +26,6 @@ struct pwm_fan_tach {
int irq;
atomic_t pulses;
unsigned int rpm;
- u8 pulses_per_revolution;
};
struct pwm_fan_ctx {
@@ -36,6 +36,7 @@ struct pwm_fan_ctx {
int tach_count;
struct pwm_fan_tach *tachs;
+ u32 *pulses_per_revolution;
ktime_t sample_start;
struct timer_list rpm_timer;
@@ -73,7 +74,7 @@ static void sample_timer(struct timer_list *t)
pulses = atomic_read(&tach->pulses);
atomic_sub(pulses, &tach->pulses);
tach->rpm = (unsigned int)(pulses * 1000 * 60) /
- (tach->pulses_per_revolution * delta);
+ (ctx->pulses_per_revolution[i] * delta);
}
ctx->sample_start = ktime_get();
@@ -229,16 +230,14 @@ static const struct thermal_cooling_device_ops pwm_fan_cooling_ops = {
.set_cur_state = pwm_fan_set_cur_state,
};
-static int pwm_fan_of_get_cooling_data(struct device *dev,
- struct pwm_fan_ctx *ctx)
+static int pwm_fan_get_cooling_data(struct device *dev, struct pwm_fan_ctx *ctx)
{
- struct device_node *np = dev->of_node;
int num, i, ret;
- if (!of_find_property(np, "cooling-levels", NULL))
+ if (!device_property_present(dev, "cooling-levels"))
return 0;
- ret = of_property_count_u32_elems(np, "cooling-levels");
+ ret = device_property_count_u32(dev, "cooling-levels");
if (ret <= 0) {
dev_err(dev, "Wrong data!\n");
return ret ? : -EINVAL;
@@ -250,8 +249,8 @@ static int pwm_fan_of_get_cooling_data(struct device *dev,
if (!ctx->pwm_fan_cooling_levels)
return -ENOMEM;
- ret = of_property_read_u32_array(np, "cooling-levels",
- ctx->pwm_fan_cooling_levels, num);
+ ret = device_property_read_u32_array(dev, "cooling-levels",
+ ctx->pwm_fan_cooling_levels, num);
if (ret) {
dev_err(dev, "Property 'cooling-levels' cannot be read!\n");
return ret;
@@ -302,7 +301,7 @@ static int pwm_fan_probe(struct platform_device *pdev)
mutex_init(&ctx->lock);
- ctx->pwm = devm_of_pwm_get(dev, dev->of_node, NULL);
+ ctx->pwm = devm_pwm_get(dev, NULL);
if (IS_ERR(ctx->pwm))
return dev_err_probe(dev, PTR_ERR(ctx->pwm), "Could not get PWM\n");
@@ -370,6 +369,20 @@ static int pwm_fan_probe(struct platform_device *pdev)
if (!fan_channel_config)
return -ENOMEM;
ctx->fan_channel.config = fan_channel_config;
+
+ ctx->pulses_per_revolution = devm_kmalloc_array(dev,
+ ctx->tach_count,
+ sizeof(*ctx->pulses_per_revolution),
+ GFP_KERNEL);
+ if (!ctx->pulses_per_revolution)
+ return -ENOMEM;
+
+ /* Setup default pulses per revolution */
+ memset32(ctx->pulses_per_revolution, 2, ctx->tach_count);
+
+ device_property_read_u32_array(dev, "pulses-per-revolution",
+ ctx->pulses_per_revolution,
+ ctx->tach_count);
}
channels = devm_kcalloc(dev, channel_count + 1,
@@ -381,7 +394,6 @@ static int pwm_fan_probe(struct platform_device *pdev)
for (i = 0; i < ctx->tach_count; i++) {
struct pwm_fan_tach *tach = &ctx->tachs[i];
- u32 ppr = 2;
tach->irq = platform_get_irq(pdev, i);
if (tach->irq == -EPROBE_DEFER)
@@ -397,20 +409,10 @@ static int pwm_fan_probe(struct platform_device *pdev)
}
}
- of_property_read_u32_index(dev->of_node,
- "pulses-per-revolution",
- i,
- &ppr);
- tach->pulses_per_revolution = ppr;
- if (!tach->pulses_per_revolution) {
- dev_err(dev, "pulses-per-revolution can't be zero.\n");
- return -EINVAL;
- }
-
fan_channel_config[i] = HWMON_F_INPUT;
dev_dbg(dev, "tach%d: irq=%d, pulses_per_revolution=%d\n",
- i, tach->irq, tach->pulses_per_revolution);
+ i, tach->irq, ctx->pulses_per_revolution[i]);
}
if (ctx->tach_count > 0) {
@@ -430,7 +432,7 @@ static int pwm_fan_probe(struct platform_device *pdev)
return PTR_ERR(hwmon);
}
- ret = pwm_fan_of_get_cooling_data(dev, ctx);
+ ret = pwm_fan_get_cooling_data(dev, ctx);
if (ret)
return ret;
--
2.35.1
