On 7/23/22 18:20, Armin Wolf wrote:
Am 23.07.22 um 16:17 schrieb Guenter Roeck:
On Sat, Jul 23, 2022 at 05:38:19AM +0200, Armin Wolf wrote:
Until now, userspace software needs to guess which
PWM channel is associated with which fan channel by
probing each PWM output and watch for fan speed changes.
This proccess is error-prone and unreliable.
Some hwmon chips, especially firmware-based ones, already
know which PWM output is associated with which fan channel.
Allow such chips to export this knowledge to userspace.
Signed-off-by: Armin Wolf <W_Armin@xxxxxx>
All of the chips I am aware of have a fixed association from pwm channel
output to fan input. None I am aware of make this association configurable.
I do not see the value of this attribute.
Guenter
That is true, the association from pwm channel output to fan input is usually fixed.
However not all chips are able to discover which pwm channel output is associated with
which fan channel. For example most superio-based chips cannot know how the motherboard
manufacturer wired the fans, and thus userspace relies on pwmconfig for manually probing
each pwm channel.
Alternatively, the user can figure it out based on board documentation
and configure it directly. That is how it is. That doesn't mean that it makes
sense to 'store' that information in a sysfs attribute. That is not what hwmon
sysfs attributes are supposed to be used for.
In contrast, many firmware-based chips do know which pwm channel output controls which
fan channel. One example might be the dell-smm-hwmon driver and the gpio-fan driver.
In this case, making the attribute RO would indeed make sense.
Unless the attribute is used to configure the chip, it does not make sense
in the first place. Also note that gpio-fan is usually configured using
devicetree properties, _and_ it only has a single set of fan/pwm properties,
so a sysfs attribute would always return 1 and make make even less sense there.
Guenter
Armin Wolf
---
Documentation/ABI/testing/sysfs-class-hwmon | 8 ++++++++
Documentation/hwmon/sysfs-interface.rst | 3 +++
drivers/hwmon/hwmon.c | 1 +
include/linux/hwmon.h | 2 ++
4 files changed, 14 insertions(+)
diff --git a/Documentation/ABI/testing/sysfs-class-hwmon b/Documentation/ABI/testing/sysfs-class-hwmon
index 7271781a23b2..f3d653bcf736 100644
--- a/Documentation/ABI/testing/sysfs-class-hwmon
+++ b/Documentation/ABI/testing/sysfs-class-hwmon
@@ -315,6 +315,14 @@ Description:
RW
+What: /sys/class/hwmon/hwmonX/pwmY_fan_channel
+Description:
+ Select which fan channel is controlled by this PWM output.
+
+ Valid fan channel/PWM output combinations are chip-dependent.
+
+ RW
+
What: /sys/class/hwmon/hwmonX/pwmY_auto_channels_temp
Description:
Select which temperature channels affect this PWM output in
diff --git a/Documentation/hwmon/sysfs-interface.rst b/Documentation/hwmon/sysfs-interface.rst
index 209626fb2405..17fcec03d3c5 100644
--- a/Documentation/hwmon/sysfs-interface.rst
+++ b/Documentation/hwmon/sysfs-interface.rst
@@ -209,6 +209,9 @@ PWM
`pwm[1-*]_freq`
Base PWM frequency in Hz.
+`pwm[1-*]_fan_channel`
+ Select which fan channel is controlled by this PWM output.
+
`pwm[1-*]_auto_channels_temp`
Select which temperature channels affect this PWM output in
auto mode.
diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c
index 2e2cd79d89eb..8c2d7574c461 100644
--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -604,6 +604,7 @@ static const char * const hwmon_pwm_attr_templates[] = {
[hwmon_pwm_enable] = "pwm%d_enable",
[hwmon_pwm_mode] = "pwm%d_mode",
[hwmon_pwm_freq] = "pwm%d_freq",
+ [hwmon_pwm_fan_channel] = "pwm%d_fan_channel",
[hwmon_pwm_auto_channels_temp] = "pwm%d_auto_channels_temp",
};
diff --git a/include/linux/hwmon.h b/include/linux/hwmon.h
index 14325f93c6b2..9d40cc1e520f 100644
--- a/include/linux/hwmon.h
+++ b/include/linux/hwmon.h
@@ -332,6 +332,7 @@ enum hwmon_pwm_attributes {
hwmon_pwm_enable,
hwmon_pwm_mode,
hwmon_pwm_freq,
+ hwmon_pwm_fan_channel,
hwmon_pwm_auto_channels_temp,
};
@@ -339,6 +340,7 @@ enum hwmon_pwm_attributes {
#define HWMON_PWM_ENABLE BIT(hwmon_pwm_enable)
#define HWMON_PWM_MODE BIT(hwmon_pwm_mode)
#define HWMON_PWM_FREQ BIT(hwmon_pwm_freq)
+#define HWMON_PWM_FAN_CHANNEL BIT(hwmon_pwm_fan_channel)
#define HWMON_PWM_AUTO_CHANNELS_TEMP BIT(hwmon_pwm_auto_channels_temp)
enum hwmon_intrusion_attributes {
--
2.30.2
