On Sun, Jul 17, 2022 at 07:14:12PM +0200, Aleksa Savic wrote:
> Define pump and fan speed register offsets in
> D5 Next control report, as well as its size, to expose PWM fan control.
>
> Originally-from: Jack Doan <me@xxxxxxxxxxxx>
> Signed-off-by: Aleksa Savic <savicaleksa83@xxxxxxxxx>
Applied.
Thanks,
Guenter
> ---
> Changes in v2:
> - Clarified in the commit message that Jack Doan is the code author
> ---
> drivers/hwmon/aquacomputer_d5next.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c
> index 0e56cc711a26..997d72ea6182 100644
> --- a/drivers/hwmon/aquacomputer_d5next.c
> +++ b/drivers/hwmon/aquacomputer_d5next.c
> @@ -71,8 +71,12 @@ static u8 secondary_ctrl_report[] = {
> #define D5NEXT_PUMP_OFFSET 0x6c
> #define D5NEXT_FAN_OFFSET 0x5f
> #define D5NEXT_5V_VOLTAGE 0x39
> +#define D5NEXT_CTRL_REPORT_SIZE 0x329
> static u8 d5next_sensor_fan_offsets[] = { D5NEXT_PUMP_OFFSET, D5NEXT_FAN_OFFSET };
>
> +/* Pump and fan speed registers in D5 Next control report (from 0-100%) */
> +static u16 d5next_ctrl_fan_offsets[] = { 0x97, 0x42 };
> +
> /* Register offsets for the Farbwerk RGB controller */
> #define FARBWERK_NUM_SENSORS 4
> #define FARBWERK_SENSOR_START 0x2f
> @@ -667,9 +671,11 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
>
> priv->num_fans = D5NEXT_NUM_FANS;
> priv->fan_sensor_offsets = d5next_sensor_fan_offsets;
> + priv->fan_ctrl_offsets = d5next_ctrl_fan_offsets;
> priv->num_temp_sensors = D5NEXT_NUM_SENSORS;
> priv->temp_sensor_start_offset = D5NEXT_COOLANT_TEMP;
> priv->power_cycle_count_offset = D5NEXT_POWER_CYCLES;
> + priv->buffer_size = D5NEXT_CTRL_REPORT_SIZE;
>
> priv->temp_label = label_d5next_temp;
> priv->speed_label = label_d5next_speeds;
