Trying to use this driver on a big-endian machine results in garbage
values for voltage and current. The tps23861 registers are little-
endian, and regmap_read_bulk() does not do byte order conversion. Thus
on BE machines, the most significant bytes got modified, and were
trimmed by the VOLTAGE_CURRENT_MASK.
To resolve this use uint16_t values, and convert them to host byte
order using le16_to_cpu(). This results in correct readings on MIPS.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx>
---
drivers/hwmon/tps23861.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/hwmon/tps23861.c b/drivers/hwmon/tps23861.c
index 8bd6435c13e8..e07f6b8a1898 100644
--- a/drivers/hwmon/tps23861.c
+++ b/drivers/hwmon/tps23861.c
@@ -140,7 +140,8 @@ static int tps23861_read_temp(struct tps23861_data *data, long *val)
static int tps23861_read_voltage(struct tps23861_data *data, int channel,
long *val)
{
- unsigned int regval;
+ uint16_t regval;
+ long raw_val;
int err;
if (channel < TPS23861_NUM_PORTS) {
@@ -155,7 +156,8 @@ static int tps23861_read_voltage(struct tps23861_data *data, int channel,
if (err < 0)
return err;
- *val = (FIELD_GET(VOLTAGE_CURRENT_MASK, regval) * VOLTAGE_LSB) / 1000;
+ raw_val = le16_to_cpu(regval);
+ *val = (FIELD_GET(VOLTAGE_CURRENT_MASK, raw_val) * VOLTAGE_LSB) / 1000;
return 0;
}
@@ -163,8 +165,9 @@ static int tps23861_read_voltage(struct tps23861_data *data, int channel,
static int tps23861_read_current(struct tps23861_data *data, int channel,
long *val)
{
- unsigned int current_lsb;
- unsigned int regval;
+ long raw_val, current_lsb;
+ uint16_t regval;
+
int err;
if (data->shunt_resistor == SHUNT_RESISTOR_DEFAULT)
@@ -178,7 +181,8 @@ static int tps23861_read_current(struct tps23861_data *data, int channel,
if (err < 0)
return err;
- *val = (FIELD_GET(VOLTAGE_CURRENT_MASK, regval) * current_lsb) / 1000000;
+ raw_val = le16_to_cpu(regval);
+ *val = (FIELD_GET(VOLTAGE_CURRENT_MASK, raw_val) * current_lsb) / 1000000;
return 0;
}
--
2.34.3
