Define pump and fan speed register offsets in
D5 Next control report, as well as its size, to expose PWM fan control.
Signed-off-by: Jack Doan <me@xxxxxxxxxxxx>
Signed-off-by: Aleksa Savic <savicaleksa83@xxxxxxxxx>
---
drivers/hwmon/aquacomputer_d5next.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c
index 0e56cc711a26..997d72ea6182 100644
--- a/drivers/hwmon/aquacomputer_d5next.c
+++ b/drivers/hwmon/aquacomputer_d5next.c
@@ -71,8 +71,12 @@ static u8 secondary_ctrl_report[] = {
#define D5NEXT_PUMP_OFFSET 0x6c
#define D5NEXT_FAN_OFFSET 0x5f
#define D5NEXT_5V_VOLTAGE 0x39
+#define D5NEXT_CTRL_REPORT_SIZE 0x329
static u8 d5next_sensor_fan_offsets[] = { D5NEXT_PUMP_OFFSET, D5NEXT_FAN_OFFSET };
+/* Pump and fan speed registers in D5 Next control report (from 0-100%) */
+static u16 d5next_ctrl_fan_offsets[] = { 0x97, 0x42 };
+
/* Register offsets for the Farbwerk RGB controller */
#define FARBWERK_NUM_SENSORS 4
#define FARBWERK_SENSOR_START 0x2f
@@ -667,9 +671,11 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
priv->num_fans = D5NEXT_NUM_FANS;
priv->fan_sensor_offsets = d5next_sensor_fan_offsets;
+ priv->fan_ctrl_offsets = d5next_ctrl_fan_offsets;
priv->num_temp_sensors = D5NEXT_NUM_SENSORS;
priv->temp_sensor_start_offset = D5NEXT_COOLANT_TEMP;
priv->power_cycle_count_offset = D5NEXT_POWER_CYCLES;
+ priv->buffer_size = D5NEXT_CTRL_REPORT_SIZE;
priv->temp_label = label_d5next_temp;
priv->speed_label = label_d5next_speeds;
--
2.36.1
