When checking if a regulator supports a voltage range, the regulator
needs to have a list_voltage callback set to the regulator_ops or else
-EINVAL will be returned. This support does not exist for the pmbus
regulators, so this patch adds pmbus_regulator_list_voltage to the
pmbus_regulator_ops.
Signed-off-by: Mårten Lindahl <marten.lindahl@xxxxxxxx>
---
drivers/hwmon/pmbus/pmbus_core.c | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 5e0d16512fa6..f303c2598fb5 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -2745,6 +2745,35 @@ static int pmbus_regulator_set_voltage(struct regulator_dev *rdev, int min_uv,
return _pmbus_write_word_data(client, s.page, PMBUS_VOUT_COMMAND, (u16)val);
}
+static int pmbus_regulator_list_voltage(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ struct device *dev = rdev_get_dev(rdev);
+ struct i2c_client *client = to_i2c_client(dev->parent);
+ int val, low, high;
+
+ if (selector >= rdev->desc->n_voltages ||
+ selector < rdev->desc->linear_min_sel)
+ return -EINVAL;
+
+ selector -= rdev->desc->linear_min_sel;
+ val = DIV_ROUND_CLOSEST(rdev->desc->min_uV +
+ (rdev->desc->uV_step * selector), 1000); /* convert to mV */
+
+ low = pmbus_regulator_get_low_margin(client, rdev_get_id(rdev));
+ if (low < 0)
+ return low;
+
+ high = pmbus_regulator_get_high_margin(client, rdev_get_id(rdev));
+ if (high < 0)
+ return high;
+
+ if (val >= low && val <= high)
+ return val * 1000; /* unit is uV */
+
+ return 0;
+}
+
const struct regulator_ops pmbus_regulator_ops = {
.enable = pmbus_regulator_enable,
.disable = pmbus_regulator_disable,
@@ -2752,6 +2781,7 @@ const struct regulator_ops pmbus_regulator_ops = {
.get_error_flags = pmbus_regulator_get_error_flags,
.get_voltage = pmbus_regulator_get_voltage,
.set_voltage = pmbus_regulator_set_voltage,
+ .list_voltage = pmbus_regulator_list_voltage,
};
EXPORT_SYMBOL_NS_GPL(pmbus_regulator_ops, PMBUS);
--
2.30.2
