Several of the manuals for devices supported by this driver describes
the need for a minimum wait time before the chip is ready to receive
next command.
This wait time is already implemented in the driver as a ltc_wait_ready
function with a driver defined wait time of 100 ms, and is considered
for specific devices before reading/writing data on the pmbus.
Since this driver uses the default pmbus_regulator_ops for the enable/
disable/is_enabled functions we should add a driver specific callback
for write_byte_data to prevent bypassing the wait time recommendations
for the following devices: ltc3880/ltc3882/ltc3883/ltc3884/ltc3886/
ltc3887/ltc3889/ltm4664/ltm4675/ltm4676/ltm4677/ltm4678/ltm4680/ltm4686/
ltm4700/ltc7880.
Signed-off-by: Mårten Lindahl <marten.lindahl@xxxxxxxx>
---
drivers/hwmon/pmbus/ltc2978.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/hwmon/pmbus/ltc2978.c b/drivers/hwmon/pmbus/ltc2978.c
index 0127273883f0..531aa674a928 100644
--- a/drivers/hwmon/pmbus/ltc2978.c
+++ b/drivers/hwmon/pmbus/ltc2978.c
@@ -196,6 +196,17 @@ static int ltc_read_byte_data(struct i2c_client *client, int page, int reg)
return pmbus_read_byte_data(client, page, reg);
}
+static int ltc_write_byte_data(struct i2c_client *client, int page, int reg, u8 value)
+{
+ int ret;
+
+ ret = ltc_wait_ready(client);
+ if (ret < 0)
+ return ret;
+
+ return pmbus_write_byte_data(client, page, reg, value);
+}
+
static int ltc_write_byte(struct i2c_client *client, int page, u8 byte)
{
int ret;
@@ -681,6 +692,7 @@ static int ltc2978_probe(struct i2c_client *client)
info = &data->info;
info->write_word_data = ltc2978_write_word_data;
info->write_byte = ltc_write_byte;
+ info->write_byte_data = ltc_write_byte_data;
info->read_word_data = ltc_read_word_data;
info->read_byte_data = ltc_read_byte_data;
--
2.30.2
