This splits the nct6775 driver into an interface-independent core and
a separate platform driver that wraps inb/outb port I/O (or asuswmi
methods) around that core.
Signed-off-by: Zev Weiss <zev@xxxxxxxxxxxxxxxxx>
Tested-by: Renze Nicolai <renze@xxxxxxxxx>
---
MAINTAINERS | 6 +-
drivers/hwmon/Kconfig | 14 +-
drivers/hwmon/Makefile | 2 +
drivers/hwmon/{nct6775.c => nct6775-core.c} | 1459 +------------------
drivers/hwmon/nct6775-platform.c | 1226 ++++++++++++++++
drivers/hwmon/nct6775.h | 252 ++++
6 files changed, 1526 insertions(+), 1433 deletions(-)
rename drivers/hwmon/{nct6775.c => nct6775-core.c} (76%)
create mode 100644 drivers/hwmon/nct6775-platform.c
create mode 100644 drivers/hwmon/nct6775.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 316b96575133..88fdb7cb3197 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13529,12 +13529,14 @@ M: Samuel Mendoza-Jonas <sam@xxxxxxxxxxxxxxxx>
S: Maintained
F: net/ncsi/
-NCT6775 HARDWARE MONITOR DRIVER
+NCT6775 HARDWARE MONITOR DRIVER - CORE & PLATFORM DRIVER
M: Guenter Roeck <linux@xxxxxxxxxxxx>
L: linux-hwmon@xxxxxxxxxxxxxxx
S: Maintained
F: Documentation/hwmon/nct6775.rst
-F: drivers/hwmon/nct6775.c
+F: drivers/hwmon/nct6775-core.c
+F: drivers/hwmon/nct6775-platform.c
+F: drivers/hwmon/nct6775.h
NETDEVSIM
M: Jakub Kicinski <kuba@xxxxxxxxxx>
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index c4e4adb6c302..85c22bba439b 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1462,11 +1462,23 @@ config SENSORS_NCT6683
This driver can also be built as a module. If so, the module
will be called nct6683.
+config SENSORS_NCT6775_CORE
+ tristate
+ select REGMAP
+ help
+ This module contains common code shared by the platform and
+ i2c versions of the nct6775 driver; it is not useful on its
+ own.
+
+ If built as a module, the module will be called
+ nct6775-core.
+
config SENSORS_NCT6775
- tristate "Nuvoton NCT6775F and compatibles"
+ tristate "Platform driver for Nuvoton NCT6775F and compatibles"
depends on !PPC
depends on ACPI_WMI || ACPI_WMI=n
select HWMON_VID
+ select SENSORS_NCT6775_CORE
help
If you say yes here you get support for the hardware monitoring
functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D,
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 8a03289e2aa4..93f2b774cc5e 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -154,6 +154,8 @@ obj-$(CONFIG_SENSORS_MLXREG_FAN) += mlxreg-fan.o
obj-$(CONFIG_SENSORS_MENF21BMC_HWMON) += menf21bmc_hwmon.o
obj-$(CONFIG_SENSORS_MR75203) += mr75203.o
obj-$(CONFIG_SENSORS_NCT6683) += nct6683.o
+obj-$(CONFIG_SENSORS_NCT6775_CORE) += nct6775-core.o
+nct6775-objs := nct6775-platform.o
obj-$(CONFIG_SENSORS_NCT6775) += nct6775.o
obj-$(CONFIG_SENSORS_NCT7802) += nct7802.o
obj-$(CONFIG_SENSORS_NCT7904) += nct7904.o
diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775-core.c
similarity index 76%
rename from drivers/hwmon/nct6775.c
rename to drivers/hwmon/nct6775-core.c
index 5e741bcf2645..446964cbae4c 100644
--- a/drivers/hwmon/nct6775.c
+++ b/drivers/hwmon/nct6775-core.c
@@ -44,25 +44,20 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
-#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
-#include <linux/hwmon-vid.h>
#include <linux/err.h>
#include <linux/mutex.h>
-#include <linux/acpi.h>
#include <linux/bitops.h>
-#include <linux/dmi.h>
-#include <linux/io.h>
#include <linux/nospec.h>
#include <linux/regmap.h>
-#include <linux/wmi.h>
#include "lm75.h"
+#include "nct6775.h"
-#define USE_ALTERNATE
+#undef DEFAULT_SYMBOL_NAMESPACE
+#define DEFAULT_SYMBOL_NAMESPACE HWMON_NCT6775
-enum kinds { nct6106, nct6116, nct6775, nct6776, nct6779, nct6791, nct6792,
- nct6793, nct6795, nct6796, nct6797, nct6798 };
+#define USE_ALTERNATE
/* used to set data->name = nct6775_device_names[data->sio_kind] */
static const char * const nct6775_device_names[] = {
@@ -80,242 +75,6 @@ static const char * const nct6775_device_names[] = {
"nct6798",
};
-static const char * const nct6775_sio_names[] __initconst = {
- "NCT6106D",
- "NCT6116D",
- "NCT6775F",
- "NCT6776D/F",
- "NCT6779D",
- "NCT6791D",
- "NCT6792D",
- "NCT6793D",
- "NCT6795D",
- "NCT6796D",
- "NCT6797D",
- "NCT6798D",
-};
-
-static unsigned short force_id;
-module_param(force_id, ushort, 0);
-MODULE_PARM_DESC(force_id, "Override the detected device ID");
-
-static unsigned short fan_debounce;
-module_param(fan_debounce, ushort, 0);
-MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal");
-
-#define DRVNAME "nct6775"
-
-/*
- * Super-I/O constants and functions
- */
-
-#define NCT6775_LD_ACPI 0x0a
-#define NCT6775_LD_HWM 0x0b
-#define NCT6775_LD_VID 0x0d
-#define NCT6775_LD_12 0x12
-
-#define SIO_REG_LDSEL 0x07 /* Logical device select */
-#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */
-#define SIO_REG_ENABLE 0x30 /* Logical device enable */
-#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
-
-#define SIO_NCT6106_ID 0xc450
-#define SIO_NCT6116_ID 0xd280
-#define SIO_NCT6775_ID 0xb470
-#define SIO_NCT6776_ID 0xc330
-#define SIO_NCT6779_ID 0xc560
-#define SIO_NCT6791_ID 0xc800
-#define SIO_NCT6792_ID 0xc910
-#define SIO_NCT6793_ID 0xd120
-#define SIO_NCT6795_ID 0xd350
-#define SIO_NCT6796_ID 0xd420
-#define SIO_NCT6797_ID 0xd450
-#define SIO_NCT6798_ID 0xd428
-#define SIO_ID_MASK 0xFFF8
-
-enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 };
-enum sensor_access { access_direct, access_asuswmi };
-
-struct nct6775_sio_data {
- int sioreg;
- int ld;
- enum kinds kind;
- enum sensor_access access;
-
- /* superio_() callbacks */
- void (*sio_outb)(struct nct6775_sio_data *sio_data, int reg, int val);
- int (*sio_inb)(struct nct6775_sio_data *sio_data, int reg);
- void (*sio_select)(struct nct6775_sio_data *sio_data, int ld);
- int (*sio_enter)(struct nct6775_sio_data *sio_data);
- void (*sio_exit)(struct nct6775_sio_data *sio_data);
-};
-
-#define ASUSWMI_MONITORING_GUID "466747A0-70EC-11DE-8A39-0800200C9A66"
-#define ASUSWMI_METHODID_RSIO 0x5253494F
-#define ASUSWMI_METHODID_WSIO 0x5753494F
-#define ASUSWMI_METHODID_RHWM 0x5248574D
-#define ASUSWMI_METHODID_WHWM 0x5748574D
-#define ASUSWMI_UNSUPPORTED_METHOD 0xFFFFFFFE
-
-static int nct6775_asuswmi_evaluate_method(u32 method_id, u8 bank, u8 reg, u8 val, u32 *retval)
-{
-#if IS_ENABLED(CONFIG_ACPI_WMI)
- u32 args = bank | (reg << 8) | (val << 16);
- struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
- struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
- acpi_status status;
- union acpi_object *obj;
- u32 tmp = ASUSWMI_UNSUPPORTED_METHOD;
-
- status = wmi_evaluate_method(ASUSWMI_MONITORING_GUID, 0,
- method_id, &input, &output);
-
- if (ACPI_FAILURE(status))
- return -EIO;
-
- obj = output.pointer;
- if (obj && obj->type == ACPI_TYPE_INTEGER)
- tmp = obj->integer.value;
-
- if (retval)
- *retval = tmp;
-
- kfree(obj);
-
- if (tmp == ASUSWMI_UNSUPPORTED_METHOD)
- return -ENODEV;
- return 0;
-#else
- return -EOPNOTSUPP;
-#endif
-}
-
-static inline int nct6775_asuswmi_write(u8 bank, u8 reg, u8 val)
-{
- return nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_WHWM, bank,
- reg, val, NULL);
-}
-
-static inline int nct6775_asuswmi_read(u8 bank, u8 reg, u8 *val)
-{
- u32 ret, tmp = 0;
-
- ret = nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_RHWM, bank,
- reg, 0, &tmp);
- *val = tmp;
- return ret;
-}
-
-static int superio_wmi_inb(struct nct6775_sio_data *sio_data, int reg)
-{
- int tmp = 0;
-
- nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_RSIO, sio_data->ld,
- reg, 0, &tmp);
- return tmp;
-}
-
-static void superio_wmi_outb(struct nct6775_sio_data *sio_data, int reg, int val)
-{
- nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_WSIO, sio_data->ld,
- reg, val, NULL);
-}
-
-static void superio_wmi_select(struct nct6775_sio_data *sio_data, int ld)
-{
- sio_data->ld = ld;
-}
-
-static int superio_wmi_enter(struct nct6775_sio_data *sio_data)
-{
- return 0;
-}
-
-static void superio_wmi_exit(struct nct6775_sio_data *sio_data)
-{
-}
-
-static void superio_outb(struct nct6775_sio_data *sio_data, int reg, int val)
-{
- int ioreg = sio_data->sioreg;
-
- outb(reg, ioreg);
- outb(val, ioreg + 1);
-}
-
-static int superio_inb(struct nct6775_sio_data *sio_data, int reg)
-{
- int ioreg = sio_data->sioreg;
-
- outb(reg, ioreg);
- return inb(ioreg + 1);
-}
-
-static void superio_select(struct nct6775_sio_data *sio_data, int ld)
-{
- int ioreg = sio_data->sioreg;
-
- outb(SIO_REG_LDSEL, ioreg);
- outb(ld, ioreg + 1);
-}
-
-static int superio_enter(struct nct6775_sio_data *sio_data)
-{
- int ioreg = sio_data->sioreg;
-
- /*
- * Try to reserve <ioreg> and <ioreg + 1> for exclusive access.
- */
- if (!request_muxed_region(ioreg, 2, DRVNAME))
- return -EBUSY;
-
- outb(0x87, ioreg);
- outb(0x87, ioreg);
-
- return 0;
-}
-
-static void superio_exit(struct nct6775_sio_data *sio_data)
-{
- int ioreg = sio_data->sioreg;
-
- outb(0xaa, ioreg);
- outb(0x02, ioreg);
- outb(0x02, ioreg + 1);
- release_region(ioreg, 2);
-}
-
-/*
- * ISA constants
- */
-
-#define IOREGION_ALIGNMENT (~7)
-#define IOREGION_OFFSET 5
-#define IOREGION_LENGTH 2
-#define ADDR_REG_OFFSET 0
-#define DATA_REG_OFFSET 1
-
-#define NCT6775_REG_BANK 0x4E
-#define NCT6775_REG_CONFIG 0x40
-#define NCT6775_PORT_CHIPID 0x58
-
-/*
- * Not currently used:
- * REG_MAN_ID has the value 0x5ca3 for all supported chips.
- * REG_CHIP_ID == 0x88/0xa1/0xc1 depending on chip model.
- * REG_MAN_ID is at port 0x4f
- * REG_CHIP_ID is at port 0x58
- */
-
-#define NUM_TEMP 10 /* Max number of temp attribute sets w/ limits*/
-#define NUM_TEMP_FIXED 6 /* Max number of fixed temp attribute sets */
-#define NUM_TSI_TEMP 8 /* Max number of TSI temp register pairs */
-
-#define NUM_REG_ALARM 7 /* Max number of alarm registers */
-#define NUM_REG_BEEP 5 /* Max number of beep registers */
-
-#define NUM_FAN 7
-
/* Common and NCT6775 specific data */
/* Voltage min/max registers for nr=7..14 are in bank 5 */
@@ -334,11 +93,6 @@ static const u16 NCT6775_REG_IN[] = {
#define NCT6775_REG_DIODE 0x5E
#define NCT6775_DIODE_MASK 0x02
-#define NCT6775_REG_FANDIV1 0x506
-#define NCT6775_REG_FANDIV2 0x507
-
-#define NCT6775_REG_CR_FAN_DEBOUNCE 0xf0
-
static const u16 NCT6775_REG_ALARM[NUM_REG_ALARM] = { 0x459, 0x45A, 0x45B };
/* 0..15 voltages, 16..23 fans, 24..29 temperatures, 30..31 intrusion */
@@ -352,10 +106,6 @@ static const s8 NCT6775_ALARM_BITS[] = {
4, 5, 13, -1, -1, -1, /* temp1..temp6 */
12, -1 }; /* intrusion0, intrusion1 */
-#define FAN_ALARM_BASE 16
-#define TEMP_ALARM_BASE 24
-#define INTRUSION_ALARM_BASE 30
-
static const u16 NCT6775_REG_BEEP[NUM_REG_BEEP] = { 0x56, 0x57, 0x453, 0x4e };
/*
@@ -371,11 +121,6 @@ static const s8 NCT6775_BEEP_BITS[] = {
4, 5, 13, -1, -1, -1, /* temp1..temp6 */
12, -1 }; /* intrusion0, intrusion1 */
-#define BEEP_ENABLE_BASE 15
-
-static const u8 NCT6775_REG_CR_CASEOPEN_CLR[] = { 0xe6, 0xee };
-static const u8 NCT6775_CR_CASEOPEN_CLR_MASK[] = { 0x20, 0x01 };
-
/* DC or PWM output fan configuration */
static const u8 NCT6775_REG_PWM_MODE[] = { 0x04, 0x04, 0x12 };
static const u8 NCT6775_PWM_MODE_MASK[] = { 0x01, 0x02, 0x01 };
@@ -691,8 +436,6 @@ static const u16 NCT6779_REG_TEMP_CRIT[32] = {
/* NCT6791 specific data */
-#define NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE 0x28
-
static const u16 NCT6791_REG_WEIGHT_TEMP_SEL[NUM_FAN] = { 0, 0x239 };
static const u16 NCT6791_REG_WEIGHT_TEMP_STEP[NUM_FAN] = { 0, 0x23a };
static const u16 NCT6791_REG_WEIGHT_TEMP_STEP_TOL[NUM_FAN] = { 0, 0x23b };
@@ -1192,165 +935,6 @@ static inline unsigned int tsi_temp_from_reg(unsigned int reg)
* Data structures and manipulation thereof
*/
-struct nct6775_data {
- int addr; /* IO base of hw monitor block */
- struct nct6775_sio_data *sio_data;
- enum kinds kind;
- const char *name;
-
- const struct attribute_group *groups[7];
- u8 num_groups;
-
- u16 reg_temp[5][NUM_TEMP]; /* 0=temp, 1=temp_over, 2=temp_hyst,
- * 3=temp_crit, 4=temp_lcrit
- */
- u8 temp_src[NUM_TEMP];
- u16 reg_temp_config[NUM_TEMP];
- const char * const *temp_label;
- u32 temp_mask;
- u32 virt_temp_mask;
-
- u16 REG_CONFIG;
- u16 REG_VBAT;
- u16 REG_DIODE;
- u8 DIODE_MASK;
-
- const s8 *ALARM_BITS;
- const s8 *BEEP_BITS;
-
- const u16 *REG_VIN;
- const u16 *REG_IN_MINMAX[2];
-
- const u16 *REG_TARGET;
- const u16 *REG_FAN;
- const u16 *REG_FAN_MODE;
- const u16 *REG_FAN_MIN;
- const u16 *REG_FAN_PULSES;
- const u16 *FAN_PULSE_SHIFT;
- const u16 *REG_FAN_TIME[3];
-
- const u16 *REG_TOLERANCE_H;
-
- const u8 *REG_PWM_MODE;
- const u8 *PWM_MODE_MASK;
-
- const u16 *REG_PWM[7]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor,
- * [3]=pwm_max, [4]=pwm_step,
- * [5]=weight_duty_step, [6]=weight_duty_base
- */
- const u16 *REG_PWM_READ;
-
- const u16 *REG_CRITICAL_PWM_ENABLE;
- u8 CRITICAL_PWM_ENABLE_MASK;
- const u16 *REG_CRITICAL_PWM;
-
- const u16 *REG_AUTO_TEMP;
- const u16 *REG_AUTO_PWM;
-
- const u16 *REG_CRITICAL_TEMP;
- const u16 *REG_CRITICAL_TEMP_TOLERANCE;
-
- const u16 *REG_TEMP_SOURCE; /* temp register sources */
- const u16 *REG_TEMP_SEL;
- const u16 *REG_WEIGHT_TEMP_SEL;
- const u16 *REG_WEIGHT_TEMP[3]; /* 0=base, 1=tolerance, 2=step */
-
- const u16 *REG_TEMP_OFFSET;
-
- const u16 *REG_ALARM;
- const u16 *REG_BEEP;
-
- const u16 *REG_TSI_TEMP;
-
- unsigned int (*fan_from_reg)(u16 reg, unsigned int divreg);
- unsigned int (*fan_from_reg_min)(u16 reg, unsigned int divreg);
-
- struct mutex update_lock;
- bool valid; /* true if following fields are valid */
- unsigned long last_updated; /* In jiffies */
-
- /* Register values */
- u8 bank; /* current register bank */
- u8 in_num; /* number of in inputs we have */
- u8 in[15][3]; /* [0]=in, [1]=in_max, [2]=in_min */
- unsigned int rpm[NUM_FAN];
- u16 fan_min[NUM_FAN];
- u8 fan_pulses[NUM_FAN];
- u8 fan_div[NUM_FAN];
- u8 has_pwm;
- u8 has_fan; /* some fan inputs can be disabled */
- u8 has_fan_min; /* some fans don't have min register */
- bool has_fan_div;
-
- u8 num_temp_alarms; /* 2, 3, or 6 */
- u8 num_temp_beeps; /* 2, 3, or 6 */
- u8 temp_fixed_num; /* 3 or 6 */
- u8 temp_type[NUM_TEMP_FIXED];
- s8 temp_offset[NUM_TEMP_FIXED];
- s16 temp[5][NUM_TEMP]; /* 0=temp, 1=temp_over, 2=temp_hyst,
- * 3=temp_crit, 4=temp_lcrit */
- s16 tsi_temp[NUM_TSI_TEMP];
- u64 alarms;
- u64 beeps;
-
- u8 pwm_num; /* number of pwm */
- u8 pwm_mode[NUM_FAN]; /* 0->DC variable voltage,
- * 1->PWM variable duty cycle
- */
- enum pwm_enable pwm_enable[NUM_FAN];
- /* 0->off
- * 1->manual
- * 2->thermal cruise mode (also called SmartFan I)
- * 3->fan speed cruise mode
- * 4->SmartFan III
- * 5->enhanced variable thermal cruise (SmartFan IV)
- */
- u8 pwm[7][NUM_FAN]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor,
- * [3]=pwm_max, [4]=pwm_step,
- * [5]=weight_duty_step, [6]=weight_duty_base
- */
-
- u8 target_temp[NUM_FAN];
- u8 target_temp_mask;
- u32 target_speed[NUM_FAN];
- u32 target_speed_tolerance[NUM_FAN];
- u8 speed_tolerance_limit;
-
- u8 temp_tolerance[2][NUM_FAN];
- u8 tolerance_mask;
-
- u8 fan_time[3][NUM_FAN]; /* 0 = stop_time, 1 = step_up, 2 = step_down */
-
- /* Automatic fan speed control registers */
- int auto_pwm_num;
- u8 auto_pwm[NUM_FAN][7];
- u8 auto_temp[NUM_FAN][7];
- u8 pwm_temp_sel[NUM_FAN];
- u8 pwm_weight_temp_sel[NUM_FAN];
- u8 weight_temp[3][NUM_FAN]; /* 0->temp_step, 1->temp_step_tol,
- * 2->temp_base
- */
-
- u8 vid;
- u8 vrm;
-
- bool have_vid;
-
- u16 have_temp;
- u16 have_temp_fixed;
- u16 have_tsi_temp;
- u16 have_in;
-
- /* Remember extra register values over suspend/resume */
- u8 vbat;
- u8 fandiv1;
- u8 fandiv2;
- u8 sio_reg_enable;
-
- struct regmap *regmap;
- bool read_only;
-};
-
struct sensor_device_template {
struct device_attribute dev_attr;
union {
@@ -1406,21 +990,6 @@ struct sensor_template_group {
int base;
};
-static inline umode_t nct6775_attr_mode(struct nct6775_data *data, struct attribute *attr)
-{
- return data->read_only ? (attr->mode & ~0222) : attr->mode;
-}
-
-static int nct6775_add_attr_group(struct nct6775_data *data, const struct attribute_group *group)
-{
- /* Need to leave a NULL terminator at the end of data->groups */
- if (data->num_groups == ARRAY_SIZE(data->groups) - 1)
- return -ENOBUFS;
-
- data->groups[data->num_groups++] = group;
- return 0;
-}
-
static int nct6775_add_template_attr_group(struct device *dev, struct nct6775_data *data,
const struct sensor_template_group *tg, int repeat)
{
@@ -1495,7 +1064,7 @@ static int nct6775_add_template_attr_group(struct device *dev, struct nct6775_da
return nct6775_add_attr_group(data, group);
}
-static bool is_word_sized(struct nct6775_data *data, u16 reg)
+bool nct6775_reg_is_word_sized(struct nct6775_data *data, u16 reg)
{
switch (data->kind) {
case nct6106:
@@ -1552,122 +1121,7 @@ static bool is_word_sized(struct nct6775_data *data, u16 reg)
}
return false;
}
-
-static inline void nct6775_wmi_set_bank(struct nct6775_data *data, u16 reg)
-{
- u8 bank = reg >> 8;
-
- data->bank = bank;
-}
-
-static int nct6775_wmi_reg_read(void *ctx, unsigned int reg, unsigned int *val)
-{
- struct nct6775_data *data = ctx;
- int err, word_sized = is_word_sized(data, reg);
- u8 tmp = 0;
- u16 res;
-
- nct6775_wmi_set_bank(data, reg);
-
- err = nct6775_asuswmi_read(data->bank, reg & 0xff, &tmp);
- if (err)
- return err;
-
- res = tmp;
- if (word_sized) {
- err = nct6775_asuswmi_read(data->bank, (reg & 0xff) + 1, &tmp);
- if (err)
- return err;
-
- res = (res << 8) + tmp;
- }
- *val = res;
- return 0;
-}
-
-static inline int nct6775_read_value(struct nct6775_data *data, u16 reg, u16 *value)
-{
- unsigned int tmp;
- int ret = regmap_read(data->regmap, reg, &tmp);
-
- if (!ret)
- *value = tmp;
- return ret;
-}
-
-static int nct6775_wmi_reg_write(void *ctx, unsigned int reg, unsigned int value)
-{
- struct nct6775_data *data = ctx;
- int res, word_sized = is_word_sized(data, reg);
-
- nct6775_wmi_set_bank(data, reg);
-
- if (word_sized) {
- res = nct6775_asuswmi_write(data->bank, reg & 0xff, value >> 8);
- if (res)
- return res;
-
- res = nct6775_asuswmi_write(data->bank, (reg & 0xff) + 1, value);
- } else {
- res = nct6775_asuswmi_write(data->bank, reg & 0xff, value);
- }
-
- return res;
-}
-
-static inline int nct6775_write_value(struct nct6775_data *data, u16 reg, u16 value)
-{
- return regmap_write(data->regmap, reg, value);
-}
-
-/*
- * On older chips, only registers 0x50-0x5f are banked.
- * On more recent chips, all registers are banked.
- * Assume that is the case and set the bank number for each access.
- * Cache the bank number so it only needs to be set if it changes.
- */
-static inline void nct6775_set_bank(struct nct6775_data *data, u16 reg)
-{
- u8 bank = reg >> 8;
-
- if (data->bank != bank) {
- outb_p(NCT6775_REG_BANK, data->addr + ADDR_REG_OFFSET);
- outb_p(bank, data->addr + DATA_REG_OFFSET);
- data->bank = bank;
- }
-}
-
-static int nct6775_reg_read(void *ctx, unsigned int reg, unsigned int *val)
-{
- struct nct6775_data *data = ctx;
- int word_sized = is_word_sized(data, reg);
-
- nct6775_set_bank(data, reg);
- outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET);
- *val = inb_p(data->addr + DATA_REG_OFFSET);
- if (word_sized) {
- outb_p((reg & 0xff) + 1,
- data->addr + ADDR_REG_OFFSET);
- *val = (*val << 8) + inb_p(data->addr + DATA_REG_OFFSET);
- }
- return 0;
-}
-
-static int nct6775_reg_write(void *ctx, unsigned int reg, unsigned int value)
-{
- struct nct6775_data *data = ctx;
- int word_sized = is_word_sized(data, reg);
-
- nct6775_set_bank(data, reg);
- outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET);
- if (word_sized) {
- outb_p(value >> 8, data->addr + DATA_REG_OFFSET);
- outb_p((reg & 0xff) + 1,
- data->addr + ADDR_REG_OFFSET);
- }
- outb_p(value & 0xff, data->addr + DATA_REG_OFFSET);
- return 0;
-}
+EXPORT_SYMBOL_GPL(nct6775_reg_is_word_sized);
/* We left-align 8-bit temperature values to make the code simpler */
static int nct6775_read_temp(struct nct6775_data *data, u16 reg, u16 *val)
@@ -1678,19 +1132,12 @@ static int nct6775_read_temp(struct nct6775_data *data, u16 reg, u16 *val)
if (err)
return err;
- if (!is_word_sized(data, reg))
+ if (!nct6775_reg_is_word_sized(data, reg))
*val <<= 8;
return 0;
}
-static int nct6775_write_temp(struct nct6775_data *data, u16 reg, u16 value)
-{
- if (!is_word_sized(data, reg))
- value >>= 8;
- return nct6775_write_value(data, reg, value);
-}
-
/* This function assumes that the caller holds data->update_lock */
static int nct6775_write_fan_div(struct nct6775_data *data, int nr)
{
@@ -2207,8 +1654,8 @@ store_in_reg(struct device *dev, struct device_attribute *attr, const char *buf,
return err ? : count;
}
-static ssize_t
-show_alarm(struct device *dev, struct device_attribute *attr, char *buf)
+ssize_t
+nct6775_show_alarm(struct device *dev, struct device_attribute *attr, char *buf)
{
struct nct6775_data *data = nct6775_update_device(dev);
struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
@@ -2221,6 +1668,7 @@ show_alarm(struct device *dev, struct device_attribute *attr, char *buf)
return sprintf(buf, "%u\n",
(unsigned int)((data->alarms >> nr) & 0x01));
}
+EXPORT_SYMBOL_GPL(nct6775_show_alarm);
static int find_temp_source(struct nct6775_data *data, int index, int count)
{
@@ -2263,8 +1711,8 @@ show_temp_alarm(struct device *dev, struct device_attribute *attr, char *buf)
return sprintf(buf, "%u\n", alarm);
}
-static ssize_t
-show_beep(struct device *dev, struct device_attribute *attr, char *buf)
+ssize_t
+nct6775_show_beep(struct device *dev, struct device_attribute *attr, char *buf)
{
struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
struct nct6775_data *data = nct6775_update_device(dev);
@@ -2278,10 +1726,10 @@ show_beep(struct device *dev, struct device_attribute *attr, char *buf)
return sprintf(buf, "%u\n",
(unsigned int)((data->beeps >> nr) & 0x01));
}
+EXPORT_SYMBOL_GPL(nct6775_show_beep);
-static ssize_t
-store_beep(struct device *dev, struct device_attribute *attr, const char *buf,
- size_t count)
+ssize_t
+nct6775_store_beep(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
struct nct6775_data *data = dev_get_drvdata(dev);
@@ -2306,6 +1754,7 @@ store_beep(struct device *dev, struct device_attribute *attr, const char *buf,
mutex_unlock(&data->update_lock);
return err ? : count;
}
+EXPORT_SYMBOL_GPL(nct6775_store_beep);
static ssize_t
show_temp_beep(struct device *dev, struct device_attribute *attr, char *buf)
@@ -2381,8 +1830,8 @@ static umode_t nct6775_in_is_visible(struct kobject *kobj,
}
SENSOR_TEMPLATE_2(in_input, "in%d_input", 0444, show_in_reg, NULL, 0, 0);
-SENSOR_TEMPLATE(in_alarm, "in%d_alarm", 0444, show_alarm, NULL, 0);
-SENSOR_TEMPLATE(in_beep, "in%d_beep", 0644, show_beep, store_beep, 0);
+SENSOR_TEMPLATE(in_alarm, "in%d_alarm", 0444, nct6775_show_alarm, NULL, 0);
+SENSOR_TEMPLATE(in_beep, "in%d_beep", 0644, nct6775_show_beep, nct6775_store_beep, 0);
SENSOR_TEMPLATE_2(in_min, "in%d_min", 0644, show_in_reg, store_in_reg, 0, 1);
SENSOR_TEMPLATE_2(in_max, "in%d_max", 0644, show_in_reg, store_in_reg, 0, 2);
@@ -2614,8 +2063,9 @@ static umode_t nct6775_fan_is_visible(struct kobject *kobj,
}
SENSOR_TEMPLATE(fan_input, "fan%d_input", 0444, show_fan, NULL, 0);
-SENSOR_TEMPLATE(fan_alarm, "fan%d_alarm", 0444, show_alarm, NULL, FAN_ALARM_BASE);
-SENSOR_TEMPLATE(fan_beep, "fan%d_beep", 0644, show_beep, store_beep, FAN_ALARM_BASE);
+SENSOR_TEMPLATE(fan_alarm, "fan%d_alarm", 0444, nct6775_show_alarm, NULL, FAN_ALARM_BASE);
+SENSOR_TEMPLATE(fan_beep, "fan%d_beep", 0644, nct6775_show_beep,
+ nct6775_store_beep, FAN_ALARM_BASE);
SENSOR_TEMPLATE(fan_pulses, "fan%d_pulses", 0644, show_fan_pulses, store_fan_pulses, 0);
SENSOR_TEMPLATE(fan_min, "fan%d_min", 0644, show_fan_min, store_fan_min, 0);
SENSOR_TEMPLATE(fan_div, "fan%d_div", 0444, show_fan_div, NULL, 0);
@@ -3857,109 +3307,6 @@ static const struct sensor_template_group nct6775_pwm_template_group = {
.base = 1,
};
-static ssize_t
-cpu0_vid_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct nct6775_data *data = dev_get_drvdata(dev);
-
- return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
-}
-
-static DEVICE_ATTR_RO(cpu0_vid);
-
-/* Case open detection */
-
-static ssize_t
-clear_caseopen(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct nct6775_data *data = dev_get_drvdata(dev);
- struct nct6775_sio_data *sio_data = data->sio_data;
- int nr = to_sensor_dev_attr(attr)->index - INTRUSION_ALARM_BASE;
- unsigned long val;
- u8 reg;
- int ret;
-
- if (kstrtoul(buf, 10, &val) || val != 0)
- return -EINVAL;
-
- mutex_lock(&data->update_lock);
-
- /*
- * Use CR registers to clear caseopen status.
- * The CR registers are the same for all chips, and not all chips
- * support clearing the caseopen status through "regular" registers.
- */
- ret = sio_data->sio_enter(sio_data);
- if (ret) {
- count = ret;
- goto error;
- }
-
- sio_data->sio_select(sio_data, NCT6775_LD_ACPI);
- reg = sio_data->sio_inb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr]);
- reg |= NCT6775_CR_CASEOPEN_CLR_MASK[nr];
- sio_data->sio_outb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr], reg);
- reg &= ~NCT6775_CR_CASEOPEN_CLR_MASK[nr];
- sio_data->sio_outb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr], reg);
- sio_data->sio_exit(sio_data);
-
- data->valid = false; /* Force cache refresh */
-error:
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static SENSOR_DEVICE_ATTR(intrusion0_alarm, 0644, show_alarm, clear_caseopen, INTRUSION_ALARM_BASE);
-static SENSOR_DEVICE_ATTR(intrusion1_alarm, 0644, show_alarm,
- clear_caseopen, INTRUSION_ALARM_BASE + 1);
-static SENSOR_DEVICE_ATTR(intrusion0_beep, 0644, show_beep, store_beep, INTRUSION_ALARM_BASE);
-static SENSOR_DEVICE_ATTR(intrusion1_beep, 0644, show_beep, store_beep, INTRUSION_ALARM_BASE + 1);
-static SENSOR_DEVICE_ATTR(beep_enable, 0644, show_beep, store_beep, BEEP_ENABLE_BASE);
-
-static umode_t nct6775_other_is_visible(struct kobject *kobj,
- struct attribute *attr, int index)
-{
- struct device *dev = kobj_to_dev(kobj);
- struct nct6775_data *data = dev_get_drvdata(dev);
-
- if (index == 0 && !data->have_vid)
- return 0;
-
- if (index == 1 || index == 2) {
- if (data->ALARM_BITS[INTRUSION_ALARM_BASE + index - 1] < 0)
- return 0;
- }
-
- if (index == 3 || index == 4) {
- if (data->BEEP_BITS[INTRUSION_ALARM_BASE + index - 3] < 0)
- return 0;
- }
-
- return nct6775_attr_mode(data, attr);
-}
-
-/*
- * nct6775_other_is_visible uses the index into the following array
- * to determine if attributes should be created or not.
- * Any change in order or content must be matched.
- */
-static struct attribute *nct6775_attributes_other[] = {
- &dev_attr_cpu0_vid.attr, /* 0 */
- &sensor_dev_attr_intrusion0_alarm.dev_attr.attr, /* 1 */
- &sensor_dev_attr_intrusion1_alarm.dev_attr.attr, /* 2 */
- &sensor_dev_attr_intrusion0_beep.dev_attr.attr, /* 3 */
- &sensor_dev_attr_intrusion1_beep.dev_attr.attr, /* 4 */
- &sensor_dev_attr_beep_enable.dev_attr.attr, /* 5 */
-
- NULL
-};
-
-static const struct attribute_group nct6775_group_other = {
- .attrs = nct6775_attributes_other,
- .is_visible = nct6775_other_is_visible,
-};
-
static inline int nct6775_init_device(struct nct6775_data *data)
{
int i, err;
@@ -4020,227 +3367,6 @@ static inline int nct6775_init_device(struct nct6775_data *data)
return 0;
}
-static void
-nct6775_check_fan_inputs(struct nct6775_data *data, struct nct6775_sio_data *sio_data)
-{
- bool fan3pin = false, fan4pin = false, fan4min = false;
- bool fan5pin = false, fan6pin = false, fan7pin = false;
- bool pwm3pin = false, pwm4pin = false, pwm5pin = false;
- bool pwm6pin = false, pwm7pin = false;
-
- /* Store SIO_REG_ENABLE for use during resume */
- sio_data->sio_select(sio_data, NCT6775_LD_HWM);
- data->sio_reg_enable = sio_data->sio_inb(sio_data, SIO_REG_ENABLE);
-
- /* fan4 and fan5 share some pins with the GPIO and serial flash */
- if (data->kind == nct6775) {
- int cr2c = sio_data->sio_inb(sio_data, 0x2c);
-
- fan3pin = cr2c & BIT(6);
- pwm3pin = cr2c & BIT(7);
-
- /* On NCT6775, fan4 shares pins with the fdc interface */
- fan4pin = !(sio_data->sio_inb(sio_data, 0x2A) & 0x80);
- } else if (data->kind == nct6776) {
- bool gpok = sio_data->sio_inb(sio_data, 0x27) & 0x80;
- const char *board_vendor, *board_name;
-
- board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
- board_name = dmi_get_system_info(DMI_BOARD_NAME);
-
- if (board_name && board_vendor &&
- !strcmp(board_vendor, "ASRock")) {
- /*
- * Auxiliary fan monitoring is not enabled on ASRock
- * Z77 Pro4-M if booted in UEFI Ultra-FastBoot mode.
- * Observed with BIOS version 2.00.
- */
- if (!strcmp(board_name, "Z77 Pro4-M")) {
- if ((data->sio_reg_enable & 0xe0) != 0xe0) {
- data->sio_reg_enable |= 0xe0;
- sio_data->sio_outb(sio_data, SIO_REG_ENABLE,
- data->sio_reg_enable);
- }
- }
- }
-
- if (data->sio_reg_enable & 0x80)
- fan3pin = gpok;
- else
- fan3pin = !(sio_data->sio_inb(sio_data, 0x24) & 0x40);
-
- if (data->sio_reg_enable & 0x40)
- fan4pin = gpok;
- else
- fan4pin = sio_data->sio_inb(sio_data, 0x1C) & 0x01;
-
- if (data->sio_reg_enable & 0x20)
- fan5pin = gpok;
- else
- fan5pin = sio_data->sio_inb(sio_data, 0x1C) & 0x02;
-
- fan4min = fan4pin;
- pwm3pin = fan3pin;
- } else if (data->kind == nct6106) {
- int cr24 = sio_data->sio_inb(sio_data, 0x24);
-
- fan3pin = !(cr24 & 0x80);
- pwm3pin = cr24 & 0x08;
- } else if (data->kind == nct6116) {
- int cr1a = sio_data->sio_inb(sio_data, 0x1a);
- int cr1b = sio_data->sio_inb(sio_data, 0x1b);
- int cr24 = sio_data->sio_inb(sio_data, 0x24);
- int cr2a = sio_data->sio_inb(sio_data, 0x2a);
- int cr2b = sio_data->sio_inb(sio_data, 0x2b);
- int cr2f = sio_data->sio_inb(sio_data, 0x2f);
-
- fan3pin = !(cr2b & 0x10);
- fan4pin = (cr2b & 0x80) || // pin 1(2)
- (!(cr2f & 0x10) && (cr1a & 0x04)); // pin 65(66)
- fan5pin = (cr2b & 0x80) || // pin 126(127)
- (!(cr1b & 0x03) && (cr2a & 0x02)); // pin 94(96)
-
- pwm3pin = fan3pin && (cr24 & 0x08);
- pwm4pin = fan4pin;
- pwm5pin = fan5pin;
- } else {
- /*
- * NCT6779D, NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D,
- * NCT6797D, NCT6798D
- */
- int cr1a = sio_data->sio_inb(sio_data, 0x1a);
- int cr1b = sio_data->sio_inb(sio_data, 0x1b);
- int cr1c = sio_data->sio_inb(sio_data, 0x1c);
- int cr1d = sio_data->sio_inb(sio_data, 0x1d);
- int cr2a = sio_data->sio_inb(sio_data, 0x2a);
- int cr2b = sio_data->sio_inb(sio_data, 0x2b);
- int cr2d = sio_data->sio_inb(sio_data, 0x2d);
- int cr2f = sio_data->sio_inb(sio_data, 0x2f);
- bool dsw_en = cr2f & BIT(3);
- bool ddr4_en = cr2f & BIT(4);
- int cre0;
- int creb;
- int cred;
-
- sio_data->sio_select(sio_data, NCT6775_LD_12);
- cre0 = sio_data->sio_inb(sio_data, 0xe0);
- creb = sio_data->sio_inb(sio_data, 0xeb);
- cred = sio_data->sio_inb(sio_data, 0xed);
-
- fan3pin = !(cr1c & BIT(5));
- fan4pin = !(cr1c & BIT(6));
- fan5pin = !(cr1c & BIT(7));
-
- pwm3pin = !(cr1c & BIT(0));
- pwm4pin = !(cr1c & BIT(1));
- pwm5pin = !(cr1c & BIT(2));
-
- switch (data->kind) {
- case nct6791:
- fan6pin = cr2d & BIT(1);
- pwm6pin = cr2d & BIT(0);
- break;
- case nct6792:
- fan6pin = !dsw_en && (cr2d & BIT(1));
- pwm6pin = !dsw_en && (cr2d & BIT(0));
- break;
- case nct6793:
- fan5pin |= cr1b & BIT(5);
- fan5pin |= creb & BIT(5);
-
- fan6pin = !dsw_en && (cr2d & BIT(1));
- fan6pin |= creb & BIT(3);
-
- pwm5pin |= cr2d & BIT(7);
- pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
-
- pwm6pin = !dsw_en && (cr2d & BIT(0));
- pwm6pin |= creb & BIT(2);
- break;
- case nct6795:
- fan5pin |= cr1b & BIT(5);
- fan5pin |= creb & BIT(5);
-
- fan6pin = (cr2a & BIT(4)) &&
- (!dsw_en || (cred & BIT(4)));
- fan6pin |= creb & BIT(3);
-
- pwm5pin |= cr2d & BIT(7);
- pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
-
- pwm6pin = (cr2a & BIT(3)) && (cred & BIT(2));
- pwm6pin |= creb & BIT(2);
- break;
- case nct6796:
- fan5pin |= cr1b & BIT(5);
- fan5pin |= (cre0 & BIT(3)) && !(cr1b & BIT(0));
- fan5pin |= creb & BIT(5);
-
- fan6pin = (cr2a & BIT(4)) &&
- (!dsw_en || (cred & BIT(4)));
- fan6pin |= creb & BIT(3);
-
- fan7pin = !(cr2b & BIT(2));
-
- pwm5pin |= cr2d & BIT(7);
- pwm5pin |= (cre0 & BIT(4)) && !(cr1b & BIT(0));
- pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
-
- pwm6pin = (cr2a & BIT(3)) && (cred & BIT(2));
- pwm6pin |= creb & BIT(2);
-
- pwm7pin = !(cr1d & (BIT(2) | BIT(3)));
- break;
- case nct6797:
- fan5pin |= !ddr4_en && (cr1b & BIT(5));
- fan5pin |= creb & BIT(5);
-
- fan6pin = cr2a & BIT(4);
- fan6pin |= creb & BIT(3);
-
- fan7pin = cr1a & BIT(1);
-
- pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
- pwm5pin |= !ddr4_en && (cr2d & BIT(7));
-
- pwm6pin = creb & BIT(2);
- pwm6pin |= cred & BIT(2);
-
- pwm7pin = cr1d & BIT(4);
- break;
- case nct6798:
- fan6pin = !(cr1b & BIT(0)) && (cre0 & BIT(3));
- fan6pin |= cr2a & BIT(4);
- fan6pin |= creb & BIT(5);
-
- fan7pin = cr1b & BIT(5);
- fan7pin |= !(cr2b & BIT(2));
- fan7pin |= creb & BIT(3);
-
- pwm6pin = !(cr1b & BIT(0)) && (cre0 & BIT(4));
- pwm6pin |= !(cred & BIT(2)) && (cr2a & BIT(3));
- pwm6pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
-
- pwm7pin = !(cr1d & (BIT(2) | BIT(3)));
- pwm7pin |= cr2d & BIT(7);
- pwm7pin |= creb & BIT(2);
- break;
- default: /* NCT6779D */
- break;
- }
-
- fan4min = fan4pin;
- }
-
- /* fan 1 and 2 (0x03) are always present */
- data->has_fan = 0x03 | (fan3pin << 2) | (fan4pin << 3) |
- (fan5pin << 4) | (fan6pin << 5) | (fan7pin << 6);
- data->has_fan_min = 0x03 | (fan3pin << 2) | (fan4min << 3) |
- (fan5pin << 4) | (fan6pin << 5) | (fan7pin << 6);
- data->has_pwm = 0x03 | (pwm3pin << 2) | (pwm4pin << 3) |
- (pwm5pin << 4) | (pwm6pin << 5) | (pwm7pin << 6);
-}
-
static int add_temp_sensors(struct nct6775_data *data, const u16 *regp,
int *available, int *mask)
{
@@ -4272,26 +3398,9 @@ static int add_temp_sensors(struct nct6775_data *data, const u16 *regp,
return 0;
}
-static const struct regmap_config nct6775_regmap_config = {
- .reg_bits = 16,
- .val_bits = 16,
- .reg_read = nct6775_reg_read,
- .reg_write = nct6775_reg_write,
-};
-
-static const struct regmap_config nct6775_wmi_regmap_config = {
- .reg_bits = 16,
- .val_bits = 16,
- .reg_read = nct6775_wmi_reg_read,
- .reg_write = nct6775_wmi_reg_write,
-};
-
-static int nct6775_probe(struct platform_device *pdev)
+int nct6775_probe(struct device *dev, struct nct6775_data *data,
+ const struct regmap_config *regmapcfg)
{
- struct device *dev = &pdev->dev;
- struct nct6775_sio_data *sio_data = dev_get_platdata(dev);
- struct nct6775_data *data;
- struct resource *res;
int i, s, err = 0;
int mask, available;
u16 src;
@@ -4299,32 +3408,8 @@ static int nct6775_probe(struct platform_device *pdev)
const u16 *reg_temp_mon, *reg_temp_alternate, *reg_temp_crit;
const u16 *reg_temp_crit_l = NULL, *reg_temp_crit_h = NULL;
int num_reg_temp, num_reg_temp_mon, num_reg_tsi_temp;
- u8 cr2a;
struct device *hwmon_dev;
struct sensor_template_group tsi_temp_tg;
- const struct regmap_config *regmapcfg;
-
- if (sio_data->access == access_direct) {
- res = platform_get_resource(pdev, IORESOURCE_IO, 0);
- if (!devm_request_region(&pdev->dev, res->start, IOREGION_LENGTH,
- DRVNAME))
- return -EBUSY;
- }
-
- data = devm_kzalloc(&pdev->dev, sizeof(struct nct6775_data),
- GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- data->kind = sio_data->kind;
- data->sio_data = sio_data;
-
- if (sio_data->access == access_direct) {
- data->addr = res->start;
- regmapcfg = &nct6775_regmap_config;
- } else {
- regmapcfg = &nct6775_wmi_regmap_config;
- }
data->regmap = devm_regmap_init(dev, NULL, data, regmapcfg);
if (IS_ERR(data->regmap))
@@ -4333,7 +3418,6 @@ static int nct6775_probe(struct platform_device *pdev)
mutex_init(&data->update_lock);
data->name = nct6775_device_names[data->kind];
data->bank = 0xff; /* Force initial bank selection */
- platform_set_drvdata(pdev, data);
switch (data->kind) {
case nct6106:
@@ -5068,79 +4152,12 @@ static int nct6775_probe(struct platform_device *pdev)
if (err)
return err;
- err = sio_data->sio_enter(sio_data);
- if (err)
- return err;
-
- cr2a = sio_data->sio_inb(sio_data, 0x2a);
- switch (data->kind) {
- case nct6775:
- data->have_vid = (cr2a & 0x40);
- break;
- case nct6776:
- data->have_vid = (cr2a & 0x60) == 0x40;
- break;
- case nct6106:
- case nct6116:
- case nct6779:
- case nct6791:
- case nct6792:
- case nct6793:
- case nct6795:
- case nct6796:
- case nct6797:
- case nct6798:
- break;
- }
-
- /*
- * Read VID value
- * We can get the VID input values directly at logical device D 0xe3.
- */
- if (data->have_vid) {
- sio_data->sio_select(sio_data, NCT6775_LD_VID);
- data->vid = sio_data->sio_inb(sio_data, 0xe3);
- data->vrm = vid_which_vrm();
- }
-
- if (fan_debounce) {
- u8 tmp;
-
- sio_data->sio_select(sio_data, NCT6775_LD_HWM);
- tmp = sio_data->sio_inb(sio_data,
- NCT6775_REG_CR_FAN_DEBOUNCE);
- switch (data->kind) {
- case nct6106:
- case nct6116:
- tmp |= 0xe0;
- break;
- case nct6775:
- tmp |= 0x1e;
- break;
- case nct6776:
- case nct6779:
- tmp |= 0x3e;
- break;
- case nct6791:
- case nct6792:
- case nct6793:
- case nct6795:
- case nct6796:
- case nct6797:
- case nct6798:
- tmp |= 0x7e;
- break;
- }
- sio_data->sio_outb(sio_data, NCT6775_REG_CR_FAN_DEBOUNCE,
- tmp);
- dev_info(&pdev->dev, "Enabled fan debounce for chip %s\n",
- data->name);
+ if (data->driver_init) {
+ err = data->driver_init(data);
+ if (err)
+ return err;
}
- nct6775_check_fan_inputs(data, sio_data);
-
- sio_data->sio_exit(sio_data);
-
/* Read fan clock dividers immediately */
err = nct6775_init_fan_common(dev, data);
if (err)
@@ -5177,430 +4194,12 @@ static int nct6775_probe(struct platform_device *pdev)
return err;
}
- err = nct6775_add_attr_group(data, &nct6775_group_other);
- if (err)
- return err;
-
hwmon_dev = devm_hwmon_device_register_with_groups(dev, data->name,
data, data->groups);
return PTR_ERR_OR_ZERO(hwmon_dev);
}
-
-static void nct6791_enable_io_mapping(struct nct6775_sio_data *sio_data)
-{
- int val;
-
- val = sio_data->sio_inb(sio_data, NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE);
- if (val & 0x10) {
- pr_info("Enabling hardware monitor logical device mappings.\n");
- sio_data->sio_outb(sio_data, NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE,
- val & ~0x10);
- }
-}
-
-static int __maybe_unused nct6775_suspend(struct device *dev)
-{
- int err;
- u16 tmp;
- struct nct6775_data *data = nct6775_update_device(dev);
-
- if (IS_ERR(data))
- return PTR_ERR(data);
-
- mutex_lock(&data->update_lock);
- err = nct6775_read_value(data, data->REG_VBAT, &tmp);
- if (err)
- goto out;
- data->vbat = tmp;
- if (data->kind == nct6775) {
- err = nct6775_read_value(data, NCT6775_REG_FANDIV1, &tmp);
- if (err)
- goto out;
- data->fandiv1 = tmp;
-
- err = nct6775_read_value(data, NCT6775_REG_FANDIV2, &tmp);
- if (err)
- goto out;
- data->fandiv2 = tmp;
- }
-out:
- mutex_unlock(&data->update_lock);
-
- return err;
-}
-
-static int __maybe_unused nct6775_resume(struct device *dev)
-{
- struct nct6775_data *data = dev_get_drvdata(dev);
- struct nct6775_sio_data *sio_data = dev_get_platdata(dev);
- int i, j, err = 0;
- u8 reg;
-
- mutex_lock(&data->update_lock);
- data->bank = 0xff; /* Force initial bank selection */
-
- err = sio_data->sio_enter(sio_data);
- if (err)
- goto abort;
-
- sio_data->sio_select(sio_data, NCT6775_LD_HWM);
- reg = sio_data->sio_inb(sio_data, SIO_REG_ENABLE);
- if (reg != data->sio_reg_enable)
- sio_data->sio_outb(sio_data, SIO_REG_ENABLE, data->sio_reg_enable);
-
- if (data->kind == nct6791 || data->kind == nct6792 ||
- data->kind == nct6793 || data->kind == nct6795 ||
- data->kind == nct6796 || data->kind == nct6797 ||
- data->kind == nct6798)
- nct6791_enable_io_mapping(sio_data);
-
- sio_data->sio_exit(sio_data);
-
- /* Restore limits */
- for (i = 0; i < data->in_num; i++) {
- if (!(data->have_in & BIT(i)))
- continue;
-
- err = nct6775_write_value(data, data->REG_IN_MINMAX[0][i], data->in[i][1]);
- if (err)
- goto abort;
- err = nct6775_write_value(data, data->REG_IN_MINMAX[1][i], data->in[i][2]);
- if (err)
- goto abort;
- }
-
- for (i = 0; i < ARRAY_SIZE(data->fan_min); i++) {
- if (!(data->has_fan_min & BIT(i)))
- continue;
-
- err = nct6775_write_value(data, data->REG_FAN_MIN[i], data->fan_min[i]);
- if (err)
- goto abort;
- }
-
- for (i = 0; i < NUM_TEMP; i++) {
- if (!(data->have_temp & BIT(i)))
- continue;
-
- for (j = 1; j < ARRAY_SIZE(data->reg_temp); j++)
- if (data->reg_temp[j][i]) {
- err = nct6775_write_temp(data, data->reg_temp[j][i],
- data->temp[j][i]);
- if (err)
- goto abort;
- }
- }
-
- /* Restore other settings */
- err = nct6775_write_value(data, data->REG_VBAT, data->vbat);
- if (err)
- goto abort;
- if (data->kind == nct6775) {
- err = nct6775_write_value(data, NCT6775_REG_FANDIV1, data->fandiv1);
- if (err)
- goto abort;
- err = nct6775_write_value(data, NCT6775_REG_FANDIV2, data->fandiv2);
- }
-
-abort:
- /* Force re-reading all values */
- data->valid = false;
- mutex_unlock(&data->update_lock);
-
- return err;
-}
-
-static SIMPLE_DEV_PM_OPS(nct6775_dev_pm_ops, nct6775_suspend, nct6775_resume);
-
-static struct platform_driver nct6775_driver = {
- .driver = {
- .name = DRVNAME,
- .pm = &nct6775_dev_pm_ops,
- },
- .probe = nct6775_probe,
-};
-
-/* nct6775_find() looks for a '627 in the Super-I/O config space */
-static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data)
-{
- u16 val;
- int err;
- int addr;
-
- sio_data->access = access_direct;
- sio_data->sioreg = sioaddr;
-
- err = sio_data->sio_enter(sio_data);
- if (err)
- return err;
-
- val = (sio_data->sio_inb(sio_data, SIO_REG_DEVID) << 8) |
- sio_data->sio_inb(sio_data, SIO_REG_DEVID + 1);
- if (force_id && val != 0xffff)
- val = force_id;
-
- switch (val & SIO_ID_MASK) {
- case SIO_NCT6106_ID:
- sio_data->kind = nct6106;
- break;
- case SIO_NCT6116_ID:
- sio_data->kind = nct6116;
- break;
- case SIO_NCT6775_ID:
- sio_data->kind = nct6775;
- break;
- case SIO_NCT6776_ID:
- sio_data->kind = nct6776;
- break;
- case SIO_NCT6779_ID:
- sio_data->kind = nct6779;
- break;
- case SIO_NCT6791_ID:
- sio_data->kind = nct6791;
- break;
- case SIO_NCT6792_ID:
- sio_data->kind = nct6792;
- break;
- case SIO_NCT6793_ID:
- sio_data->kind = nct6793;
- break;
- case SIO_NCT6795_ID:
- sio_data->kind = nct6795;
- break;
- case SIO_NCT6796_ID:
- sio_data->kind = nct6796;
- break;
- case SIO_NCT6797_ID:
- sio_data->kind = nct6797;
- break;
- case SIO_NCT6798_ID:
- sio_data->kind = nct6798;
- break;
- default:
- if (val != 0xffff)
- pr_debug("unsupported chip ID: 0x%04x\n", val);
- sio_data->sio_exit(sio_data);
- return -ENODEV;
- }
-
- /* We have a known chip, find the HWM I/O address */
- sio_data->sio_select(sio_data, NCT6775_LD_HWM);
- val = (sio_data->sio_inb(sio_data, SIO_REG_ADDR) << 8)
- | sio_data->sio_inb(sio_data, SIO_REG_ADDR + 1);
- addr = val & IOREGION_ALIGNMENT;
- if (addr == 0) {
- pr_err("Refusing to enable a Super-I/O device with a base I/O port 0\n");
- sio_data->sio_exit(sio_data);
- return -ENODEV;
- }
-
- /* Activate logical device if needed */
- val = sio_data->sio_inb(sio_data, SIO_REG_ENABLE);
- if (!(val & 0x01)) {
- pr_warn("Forcibly enabling Super-I/O. Sensor is probably unusable.\n");
- sio_data->sio_outb(sio_data, SIO_REG_ENABLE, val | 0x01);
- }
-
- if (sio_data->kind == nct6791 || sio_data->kind == nct6792 ||
- sio_data->kind == nct6793 || sio_data->kind == nct6795 ||
- sio_data->kind == nct6796 || sio_data->kind == nct6797 ||
- sio_data->kind == nct6798)
- nct6791_enable_io_mapping(sio_data);
-
- sio_data->sio_exit(sio_data);
- pr_info("Found %s or compatible chip at %#x:%#x\n",
- nct6775_sio_names[sio_data->kind], sioaddr, addr);
-
- return addr;
-}
-
-/*
- * when Super-I/O functions move to a separate file, the Super-I/O
- * bus will manage the lifetime of the device and this module will only keep
- * track of the nct6775 driver. But since we use platform_device_alloc(), we
- * must keep track of the device
- */
-static struct platform_device *pdev[2];
-
-static const char * const asus_wmi_boards[] = {
- "ProArt X570-CREATOR WIFI",
- "Pro B550M-C",
- "Pro WS X570-ACE",
- "PRIME B360-PLUS",
- "PRIME B460-PLUS",
- "PRIME B550-PLUS",
- "PRIME B550M-A",
- "PRIME B550M-A (WI-FI)",
- "PRIME X570-P",
- "PRIME X570-PRO",
- "ROG CROSSHAIR VIII DARK HERO",
- "ROG CROSSHAIR VIII FORMULA",
- "ROG CROSSHAIR VIII HERO",
- "ROG CROSSHAIR VIII IMPACT",
- "ROG STRIX B550-A GAMING",
- "ROG STRIX B550-E GAMING",
- "ROG STRIX B550-F GAMING",
- "ROG STRIX B550-F GAMING (WI-FI)",
- "ROG STRIX B550-F GAMING WIFI II",
- "ROG STRIX B550-I GAMING",
- "ROG STRIX B550-XE GAMING (WI-FI)",
- "ROG STRIX X570-E GAMING",
- "ROG STRIX X570-F GAMING",
- "ROG STRIX X570-I GAMING",
- "ROG STRIX Z390-E GAMING",
- "ROG STRIX Z390-F GAMING",
- "ROG STRIX Z390-H GAMING",
- "ROG STRIX Z390-I GAMING",
- "ROG STRIX Z490-A GAMING",
- "ROG STRIX Z490-E GAMING",
- "ROG STRIX Z490-F GAMING",
- "ROG STRIX Z490-G GAMING",
- "ROG STRIX Z490-G GAMING (WI-FI)",
- "ROG STRIX Z490-H GAMING",
- "ROG STRIX Z490-I GAMING",
- "TUF GAMING B550M-PLUS",
- "TUF GAMING B550M-PLUS (WI-FI)",
- "TUF GAMING B550-PLUS",
- "TUF GAMING B550-PRO",
- "TUF GAMING X570-PLUS",
- "TUF GAMING X570-PLUS (WI-FI)",
- "TUF GAMING X570-PRO (WI-FI)",
- "TUF GAMING Z490-PLUS",
- "TUF GAMING Z490-PLUS (WI-FI)",
-};
-
-static int __init sensors_nct6775_init(void)
-{
- int i, err;
- bool found = false;
- int address;
- struct resource res;
- struct nct6775_sio_data sio_data;
- int sioaddr[2] = { 0x2e, 0x4e };
- enum sensor_access access = access_direct;
- const char *board_vendor, *board_name;
- u8 tmp;
-
- err = platform_driver_register(&nct6775_driver);
- if (err)
- return err;
-
- board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
- board_name = dmi_get_system_info(DMI_BOARD_NAME);
-
- if (board_name && board_vendor &&
- !strcmp(board_vendor, "ASUSTeK COMPUTER INC.")) {
- err = match_string(asus_wmi_boards, ARRAY_SIZE(asus_wmi_boards),
- board_name);
- if (err >= 0) {
- /* if reading chip id via WMI succeeds, use WMI */
- if (!nct6775_asuswmi_read(0, NCT6775_PORT_CHIPID, &tmp) && tmp) {
- pr_info("Using Asus WMI to access %#x chip.\n", tmp);
- access = access_asuswmi;
- } else {
- pr_err("Can't read ChipID by Asus WMI.\n");
- }
- }
- }
-
- /*
- * initialize sio_data->kind and sio_data->sioreg.
- *
- * when Super-I/O functions move to a separate file, the Super-I/O
- * driver will probe 0x2e and 0x4e and auto-detect the presence of a
- * nct6775 hardware monitor, and call probe()
- */
- for (i = 0; i < ARRAY_SIZE(pdev); i++) {
- sio_data.sio_outb = superio_outb;
- sio_data.sio_inb = superio_inb;
- sio_data.sio_select = superio_select;
- sio_data.sio_enter = superio_enter;
- sio_data.sio_exit = superio_exit;
-
- address = nct6775_find(sioaddr[i], &sio_data);
- if (address <= 0)
- continue;
-
- found = true;
-
- sio_data.access = access;
-
- if (access == access_asuswmi) {
- sio_data.sio_outb = superio_wmi_outb;
- sio_data.sio_inb = superio_wmi_inb;
- sio_data.sio_select = superio_wmi_select;
- sio_data.sio_enter = superio_wmi_enter;
- sio_data.sio_exit = superio_wmi_exit;
- }
-
- pdev[i] = platform_device_alloc(DRVNAME, address);
- if (!pdev[i]) {
- err = -ENOMEM;
- goto exit_device_unregister;
- }
-
- err = platform_device_add_data(pdev[i], &sio_data,
- sizeof(struct nct6775_sio_data));
- if (err)
- goto exit_device_put;
-
- if (sio_data.access == access_direct) {
- memset(&res, 0, sizeof(res));
- res.name = DRVNAME;
- res.start = address + IOREGION_OFFSET;
- res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1;
- res.flags = IORESOURCE_IO;
-
- err = acpi_check_resource_conflict(&res);
- if (err) {
- platform_device_put(pdev[i]);
- pdev[i] = NULL;
- continue;
- }
-
- err = platform_device_add_resources(pdev[i], &res, 1);
- if (err)
- goto exit_device_put;
- }
-
- /* platform_device_add calls probe() */
- err = platform_device_add(pdev[i]);
- if (err)
- goto exit_device_put;
- }
- if (!found) {
- err = -ENODEV;
- goto exit_unregister;
- }
-
- return 0;
-
-exit_device_put:
- platform_device_put(pdev[i]);
-exit_device_unregister:
- while (--i >= 0) {
- if (pdev[i])
- platform_device_unregister(pdev[i]);
- }
-exit_unregister:
- platform_driver_unregister(&nct6775_driver);
- return err;
-}
-
-static void __exit sensors_nct6775_exit(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(pdev); i++) {
- if (pdev[i])
- platform_device_unregister(pdev[i]);
- }
- platform_driver_unregister(&nct6775_driver);
-}
+EXPORT_SYMBOL_GPL(nct6775_probe);
MODULE_AUTHOR("Guenter Roeck <linux@xxxxxxxxxxxx>");
-MODULE_DESCRIPTION("Driver for NCT6775F and compatible chips");
+MODULE_DESCRIPTION("Core driver for NCT6775F and compatible chips");
MODULE_LICENSE("GPL");
-
-module_init(sensors_nct6775_init);
-module_exit(sensors_nct6775_exit);
diff --git a/drivers/hwmon/nct6775-platform.c b/drivers/hwmon/nct6775-platform.c
new file mode 100644
index 000000000000..c2f76af735a2
--- /dev/null
+++ b/drivers/hwmon/nct6775-platform.c
@@ -0,0 +1,1226 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * nct6775 - Platform driver for the hardware monitoring
+ * functionality of Nuvoton NCT677x Super-I/O chips
+ *
+ * Copyright (C) 2012 Guenter Roeck <linux@xxxxxxxxxxxx>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/wmi.h>
+
+#include "nct6775.h"
+
+enum sensor_access { access_direct, access_asuswmi };
+
+static const char * const nct6775_sio_names[] __initconst = {
+ "NCT6106D",
+ "NCT6116D",
+ "NCT6775F",
+ "NCT6776D/F",
+ "NCT6779D",
+ "NCT6791D",
+ "NCT6792D",
+ "NCT6793D",
+ "NCT6795D",
+ "NCT6796D",
+ "NCT6797D",
+ "NCT6798D",
+};
+
+static unsigned short force_id;
+module_param(force_id, ushort, 0);
+MODULE_PARM_DESC(force_id, "Override the detected device ID");
+
+static unsigned short fan_debounce;
+module_param(fan_debounce, ushort, 0);
+MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal");
+
+#define DRVNAME "nct6775"
+
+#define NCT6775_PORT_CHIPID 0x58
+
+/*
+ * ISA constants
+ */
+
+#define IOREGION_ALIGNMENT (~7)
+#define IOREGION_OFFSET 5
+#define IOREGION_LENGTH 2
+#define ADDR_REG_OFFSET 0
+#define DATA_REG_OFFSET 1
+
+/*
+ * Super-I/O constants and functions
+ */
+
+#define NCT6775_LD_ACPI 0x0a
+#define NCT6775_LD_HWM 0x0b
+#define NCT6775_LD_VID 0x0d
+#define NCT6775_LD_12 0x12
+
+#define SIO_REG_LDSEL 0x07 /* Logical device select */
+#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */
+#define SIO_REG_ENABLE 0x30 /* Logical device enable */
+#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
+
+#define SIO_NCT6106_ID 0xc450
+#define SIO_NCT6116_ID 0xd280
+#define SIO_NCT6775_ID 0xb470
+#define SIO_NCT6776_ID 0xc330
+#define SIO_NCT6779_ID 0xc560
+#define SIO_NCT6791_ID 0xc800
+#define SIO_NCT6792_ID 0xc910
+#define SIO_NCT6793_ID 0xd120
+#define SIO_NCT6795_ID 0xd350
+#define SIO_NCT6796_ID 0xd420
+#define SIO_NCT6797_ID 0xd450
+#define SIO_NCT6798_ID 0xd428
+#define SIO_ID_MASK 0xFFF8
+
+/*
+ * Control registers
+ */
+#define NCT6775_REG_CR_FAN_DEBOUNCE 0xf0
+
+struct nct6775_sio_data {
+ int sioreg;
+ int ld;
+ enum kinds kind;
+ enum sensor_access access;
+
+ /* superio_() callbacks */
+ void (*sio_outb)(struct nct6775_sio_data *sio_data, int reg, int val);
+ int (*sio_inb)(struct nct6775_sio_data *sio_data, int reg);
+ void (*sio_select)(struct nct6775_sio_data *sio_data, int ld);
+ int (*sio_enter)(struct nct6775_sio_data *sio_data);
+ void (*sio_exit)(struct nct6775_sio_data *sio_data);
+};
+
+#define ASUSWMI_MONITORING_GUID "466747A0-70EC-11DE-8A39-0800200C9A66"
+#define ASUSWMI_METHODID_RSIO 0x5253494F
+#define ASUSWMI_METHODID_WSIO 0x5753494F
+#define ASUSWMI_METHODID_RHWM 0x5248574D
+#define ASUSWMI_METHODID_WHWM 0x5748574D
+#define ASUSWMI_UNSUPPORTED_METHOD 0xFFFFFFFE
+
+static int nct6775_asuswmi_evaluate_method(u32 method_id, u8 bank, u8 reg, u8 val, u32 *retval)
+{
+#if IS_ENABLED(CONFIG_ACPI_WMI)
+ u32 args = bank | (reg << 8) | (val << 16);
+ struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
+ struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+ acpi_status status;
+ union acpi_object *obj;
+ u32 tmp = ASUSWMI_UNSUPPORTED_METHOD;
+
+ status = wmi_evaluate_method(ASUSWMI_MONITORING_GUID, 0,
+ method_id, &input, &output);
+
+ if (ACPI_FAILURE(status))
+ return -EIO;
+
+ obj = output.pointer;
+ if (obj && obj->type == ACPI_TYPE_INTEGER)
+ tmp = obj->integer.value;
+
+ if (retval)
+ *retval = tmp;
+
+ kfree(obj);
+
+ if (tmp == ASUSWMI_UNSUPPORTED_METHOD)
+ return -ENODEV;
+ return 0;
+#else
+ return -EOPNOTSUPP;
+#endif
+}
+
+static inline int nct6775_asuswmi_write(u8 bank, u8 reg, u8 val)
+{
+ return nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_WHWM, bank,
+ reg, val, NULL);
+}
+
+static inline int nct6775_asuswmi_read(u8 bank, u8 reg, u8 *val)
+{
+ u32 ret, tmp = 0;
+
+ ret = nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_RHWM, bank,
+ reg, 0, &tmp);
+ *val = tmp;
+ return ret;
+}
+
+static int superio_wmi_inb(struct nct6775_sio_data *sio_data, int reg)
+{
+ int tmp = 0;
+
+ nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_RSIO, sio_data->ld,
+ reg, 0, &tmp);
+ return tmp;
+}
+
+static void superio_wmi_outb(struct nct6775_sio_data *sio_data, int reg, int val)
+{
+ nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_WSIO, sio_data->ld,
+ reg, val, NULL);
+}
+
+static void superio_wmi_select(struct nct6775_sio_data *sio_data, int ld)
+{
+ sio_data->ld = ld;
+}
+
+static int superio_wmi_enter(struct nct6775_sio_data *sio_data)
+{
+ return 0;
+}
+
+static void superio_wmi_exit(struct nct6775_sio_data *sio_data)
+{
+}
+
+static void superio_outb(struct nct6775_sio_data *sio_data, int reg, int val)
+{
+ int ioreg = sio_data->sioreg;
+
+ outb(reg, ioreg);
+ outb(val, ioreg + 1);
+}
+
+static int superio_inb(struct nct6775_sio_data *sio_data, int reg)
+{
+ int ioreg = sio_data->sioreg;
+
+ outb(reg, ioreg);
+ return inb(ioreg + 1);
+}
+
+static void superio_select(struct nct6775_sio_data *sio_data, int ld)
+{
+ int ioreg = sio_data->sioreg;
+
+ outb(SIO_REG_LDSEL, ioreg);
+ outb(ld, ioreg + 1);
+}
+
+static int superio_enter(struct nct6775_sio_data *sio_data)
+{
+ int ioreg = sio_data->sioreg;
+
+ /*
+ * Try to reserve <ioreg> and <ioreg + 1> for exclusive access.
+ */
+ if (!request_muxed_region(ioreg, 2, DRVNAME))
+ return -EBUSY;
+
+ outb(0x87, ioreg);
+ outb(0x87, ioreg);
+
+ return 0;
+}
+
+static void superio_exit(struct nct6775_sio_data *sio_data)
+{
+ int ioreg = sio_data->sioreg;
+
+ outb(0xaa, ioreg);
+ outb(0x02, ioreg);
+ outb(0x02, ioreg + 1);
+ release_region(ioreg, 2);
+}
+
+static inline void nct6775_wmi_set_bank(struct nct6775_data *data, u16 reg)
+{
+ u8 bank = reg >> 8;
+
+ data->bank = bank;
+}
+
+static int nct6775_wmi_reg_read(void *ctx, unsigned int reg, unsigned int *val)
+{
+ struct nct6775_data *data = ctx;
+ int err, word_sized = nct6775_reg_is_word_sized(data, reg);
+ u8 tmp = 0;
+ u16 res;
+
+ nct6775_wmi_set_bank(data, reg);
+
+ err = nct6775_asuswmi_read(data->bank, reg & 0xff, &tmp);
+ if (err)
+ return err;
+
+ res = tmp;
+ if (word_sized) {
+ err = nct6775_asuswmi_read(data->bank, (reg & 0xff) + 1, &tmp);
+ if (err)
+ return err;
+
+ res = (res << 8) + tmp;
+ }
+ *val = res;
+ return 0;
+}
+
+static int nct6775_wmi_reg_write(void *ctx, unsigned int reg, unsigned int value)
+{
+ struct nct6775_data *data = ctx;
+ int res, word_sized = nct6775_reg_is_word_sized(data, reg);
+
+ nct6775_wmi_set_bank(data, reg);
+
+ if (word_sized) {
+ res = nct6775_asuswmi_write(data->bank, reg & 0xff, value >> 8);
+ if (res)
+ return res;
+
+ res = nct6775_asuswmi_write(data->bank, (reg & 0xff) + 1, value);
+ } else {
+ res = nct6775_asuswmi_write(data->bank, reg & 0xff, value);
+ }
+
+ return res;
+}
+
+/*
+ * On older chips, only registers 0x50-0x5f are banked.
+ * On more recent chips, all registers are banked.
+ * Assume that is the case and set the bank number for each access.
+ * Cache the bank number so it only needs to be set if it changes.
+ */
+static inline void nct6775_set_bank(struct nct6775_data *data, u16 reg)
+{
+ u8 bank = reg >> 8;
+
+ if (data->bank != bank) {
+ outb_p(NCT6775_REG_BANK, data->addr + ADDR_REG_OFFSET);
+ outb_p(bank, data->addr + DATA_REG_OFFSET);
+ data->bank = bank;
+ }
+}
+
+static int nct6775_reg_read(void *ctx, unsigned int reg, unsigned int *val)
+{
+ struct nct6775_data *data = ctx;
+ int word_sized = nct6775_reg_is_word_sized(data, reg);
+
+ nct6775_set_bank(data, reg);
+ outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET);
+ *val = inb_p(data->addr + DATA_REG_OFFSET);
+ if (word_sized) {
+ outb_p((reg & 0xff) + 1,
+ data->addr + ADDR_REG_OFFSET);
+ *val = (*val << 8) + inb_p(data->addr + DATA_REG_OFFSET);
+ }
+ return 0;
+}
+
+static int nct6775_reg_write(void *ctx, unsigned int reg, unsigned int value)
+{
+ struct nct6775_data *data = ctx;
+ int word_sized = nct6775_reg_is_word_sized(data, reg);
+
+ nct6775_set_bank(data, reg);
+ outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET);
+ if (word_sized) {
+ outb_p(value >> 8, data->addr + DATA_REG_OFFSET);
+ outb_p((reg & 0xff) + 1,
+ data->addr + ADDR_REG_OFFSET);
+ }
+ outb_p(value & 0xff, data->addr + DATA_REG_OFFSET);
+ return 0;
+}
+
+static void nct6791_enable_io_mapping(struct nct6775_sio_data *sio_data)
+{
+ int val;
+
+ val = sio_data->sio_inb(sio_data, NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE);
+ if (val & 0x10) {
+ pr_info("Enabling hardware monitor logical device mappings.\n");
+ sio_data->sio_outb(sio_data, NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE,
+ val & ~0x10);
+ }
+}
+
+static int __maybe_unused nct6775_suspend(struct device *dev)
+{
+ int err;
+ u16 tmp;
+ struct nct6775_data *data = dev_get_drvdata(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ mutex_lock(&data->update_lock);
+ err = nct6775_read_value(data, data->REG_VBAT, &tmp);
+ if (err)
+ goto out;
+ data->vbat = tmp;
+ if (data->kind == nct6775) {
+ err = nct6775_read_value(data, NCT6775_REG_FANDIV1, &tmp);
+ if (err)
+ goto out;
+ data->fandiv1 = tmp;
+
+ err = nct6775_read_value(data, NCT6775_REG_FANDIV2, &tmp);
+ if (err)
+ goto out;
+ data->fandiv2 = tmp;
+ }
+out:
+ mutex_unlock(&data->update_lock);
+
+ return err;
+}
+
+static int __maybe_unused nct6775_resume(struct device *dev)
+{
+ struct nct6775_data *data = dev_get_drvdata(dev);
+ struct nct6775_sio_data *sio_data = dev_get_platdata(dev);
+ int i, j, err = 0;
+ u8 reg;
+
+ mutex_lock(&data->update_lock);
+ data->bank = 0xff; /* Force initial bank selection */
+
+ err = sio_data->sio_enter(sio_data);
+ if (err)
+ goto abort;
+
+ sio_data->sio_select(sio_data, NCT6775_LD_HWM);
+ reg = sio_data->sio_inb(sio_data, SIO_REG_ENABLE);
+ if (reg != data->sio_reg_enable)
+ sio_data->sio_outb(sio_data, SIO_REG_ENABLE, data->sio_reg_enable);
+
+ if (data->kind == nct6791 || data->kind == nct6792 ||
+ data->kind == nct6793 || data->kind == nct6795 ||
+ data->kind == nct6796 || data->kind == nct6797 ||
+ data->kind == nct6798)
+ nct6791_enable_io_mapping(sio_data);
+
+ sio_data->sio_exit(sio_data);
+
+ /* Restore limits */
+ for (i = 0; i < data->in_num; i++) {
+ if (!(data->have_in & BIT(i)))
+ continue;
+
+ err = nct6775_write_value(data, data->REG_IN_MINMAX[0][i], data->in[i][1]);
+ if (err)
+ goto abort;
+ err = nct6775_write_value(data, data->REG_IN_MINMAX[1][i], data->in[i][2]);
+ if (err)
+ goto abort;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(data->fan_min); i++) {
+ if (!(data->has_fan_min & BIT(i)))
+ continue;
+
+ err = nct6775_write_value(data, data->REG_FAN_MIN[i], data->fan_min[i]);
+ if (err)
+ goto abort;
+ }
+
+ for (i = 0; i < NUM_TEMP; i++) {
+ if (!(data->have_temp & BIT(i)))
+ continue;
+
+ for (j = 1; j < ARRAY_SIZE(data->reg_temp); j++)
+ if (data->reg_temp[j][i]) {
+ err = nct6775_write_temp(data, data->reg_temp[j][i],
+ data->temp[j][i]);
+ if (err)
+ goto abort;
+ }
+ }
+
+ /* Restore other settings */
+ err = nct6775_write_value(data, data->REG_VBAT, data->vbat);
+ if (err)
+ goto abort;
+ if (data->kind == nct6775) {
+ err = nct6775_write_value(data, NCT6775_REG_FANDIV1, data->fandiv1);
+ if (err)
+ goto abort;
+ err = nct6775_write_value(data, NCT6775_REG_FANDIV2, data->fandiv2);
+ }
+
+abort:
+ /* Force re-reading all values */
+ data->valid = false;
+ mutex_unlock(&data->update_lock);
+
+ return err;
+}
+
+static SIMPLE_DEV_PM_OPS(nct6775_dev_pm_ops, nct6775_suspend, nct6775_resume);
+
+static void
+nct6775_check_fan_inputs(struct nct6775_data *data, struct nct6775_sio_data *sio_data)
+{
+ bool fan3pin = false, fan4pin = false, fan4min = false;
+ bool fan5pin = false, fan6pin = false, fan7pin = false;
+ bool pwm3pin = false, pwm4pin = false, pwm5pin = false;
+ bool pwm6pin = false, pwm7pin = false;
+
+ /* Store SIO_REG_ENABLE for use during resume */
+ sio_data->sio_select(sio_data, NCT6775_LD_HWM);
+ data->sio_reg_enable = sio_data->sio_inb(sio_data, SIO_REG_ENABLE);
+
+ /* fan4 and fan5 share some pins with the GPIO and serial flash */
+ if (data->kind == nct6775) {
+ int cr2c = sio_data->sio_inb(sio_data, 0x2c);
+
+ fan3pin = cr2c & BIT(6);
+ pwm3pin = cr2c & BIT(7);
+
+ /* On NCT6775, fan4 shares pins with the fdc interface */
+ fan4pin = !(sio_data->sio_inb(sio_data, 0x2A) & 0x80);
+ } else if (data->kind == nct6776) {
+ bool gpok = sio_data->sio_inb(sio_data, 0x27) & 0x80;
+ const char *board_vendor, *board_name;
+
+ board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+ board_name = dmi_get_system_info(DMI_BOARD_NAME);
+
+ if (board_name && board_vendor &&
+ !strcmp(board_vendor, "ASRock")) {
+ /*
+ * Auxiliary fan monitoring is not enabled on ASRock
+ * Z77 Pro4-M if booted in UEFI Ultra-FastBoot mode.
+ * Observed with BIOS version 2.00.
+ */
+ if (!strcmp(board_name, "Z77 Pro4-M")) {
+ if ((data->sio_reg_enable & 0xe0) != 0xe0) {
+ data->sio_reg_enable |= 0xe0;
+ sio_data->sio_outb(sio_data, SIO_REG_ENABLE,
+ data->sio_reg_enable);
+ }
+ }
+ }
+
+ if (data->sio_reg_enable & 0x80)
+ fan3pin = gpok;
+ else
+ fan3pin = !(sio_data->sio_inb(sio_data, 0x24) & 0x40);
+
+ if (data->sio_reg_enable & 0x40)
+ fan4pin = gpok;
+ else
+ fan4pin = sio_data->sio_inb(sio_data, 0x1C) & 0x01;
+
+ if (data->sio_reg_enable & 0x20)
+ fan5pin = gpok;
+ else
+ fan5pin = sio_data->sio_inb(sio_data, 0x1C) & 0x02;
+
+ fan4min = fan4pin;
+ pwm3pin = fan3pin;
+ } else if (data->kind == nct6106) {
+ int cr24 = sio_data->sio_inb(sio_data, 0x24);
+
+ fan3pin = !(cr24 & 0x80);
+ pwm3pin = cr24 & 0x08;
+ } else if (data->kind == nct6116) {
+ int cr1a = sio_data->sio_inb(sio_data, 0x1a);
+ int cr1b = sio_data->sio_inb(sio_data, 0x1b);
+ int cr24 = sio_data->sio_inb(sio_data, 0x24);
+ int cr2a = sio_data->sio_inb(sio_data, 0x2a);
+ int cr2b = sio_data->sio_inb(sio_data, 0x2b);
+ int cr2f = sio_data->sio_inb(sio_data, 0x2f);
+
+ fan3pin = !(cr2b & 0x10);
+ fan4pin = (cr2b & 0x80) || // pin 1(2)
+ (!(cr2f & 0x10) && (cr1a & 0x04)); // pin 65(66)
+ fan5pin = (cr2b & 0x80) || // pin 126(127)
+ (!(cr1b & 0x03) && (cr2a & 0x02)); // pin 94(96)
+
+ pwm3pin = fan3pin && (cr24 & 0x08);
+ pwm4pin = fan4pin;
+ pwm5pin = fan5pin;
+ } else {
+ /*
+ * NCT6779D, NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D,
+ * NCT6797D, NCT6798D
+ */
+ int cr1a = sio_data->sio_inb(sio_data, 0x1a);
+ int cr1b = sio_data->sio_inb(sio_data, 0x1b);
+ int cr1c = sio_data->sio_inb(sio_data, 0x1c);
+ int cr1d = sio_data->sio_inb(sio_data, 0x1d);
+ int cr2a = sio_data->sio_inb(sio_data, 0x2a);
+ int cr2b = sio_data->sio_inb(sio_data, 0x2b);
+ int cr2d = sio_data->sio_inb(sio_data, 0x2d);
+ int cr2f = sio_data->sio_inb(sio_data, 0x2f);
+ bool dsw_en = cr2f & BIT(3);
+ bool ddr4_en = cr2f & BIT(4);
+ int cre0;
+ int creb;
+ int cred;
+
+ sio_data->sio_select(sio_data, NCT6775_LD_12);
+ cre0 = sio_data->sio_inb(sio_data, 0xe0);
+ creb = sio_data->sio_inb(sio_data, 0xeb);
+ cred = sio_data->sio_inb(sio_data, 0xed);
+
+ fan3pin = !(cr1c & BIT(5));
+ fan4pin = !(cr1c & BIT(6));
+ fan5pin = !(cr1c & BIT(7));
+
+ pwm3pin = !(cr1c & BIT(0));
+ pwm4pin = !(cr1c & BIT(1));
+ pwm5pin = !(cr1c & BIT(2));
+
+ switch (data->kind) {
+ case nct6791:
+ fan6pin = cr2d & BIT(1);
+ pwm6pin = cr2d & BIT(0);
+ break;
+ case nct6792:
+ fan6pin = !dsw_en && (cr2d & BIT(1));
+ pwm6pin = !dsw_en && (cr2d & BIT(0));
+ break;
+ case nct6793:
+ fan5pin |= cr1b & BIT(5);
+ fan5pin |= creb & BIT(5);
+
+ fan6pin = !dsw_en && (cr2d & BIT(1));
+ fan6pin |= creb & BIT(3);
+
+ pwm5pin |= cr2d & BIT(7);
+ pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
+
+ pwm6pin = !dsw_en && (cr2d & BIT(0));
+ pwm6pin |= creb & BIT(2);
+ break;
+ case nct6795:
+ fan5pin |= cr1b & BIT(5);
+ fan5pin |= creb & BIT(5);
+
+ fan6pin = (cr2a & BIT(4)) &&
+ (!dsw_en || (cred & BIT(4)));
+ fan6pin |= creb & BIT(3);
+
+ pwm5pin |= cr2d & BIT(7);
+ pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
+
+ pwm6pin = (cr2a & BIT(3)) && (cred & BIT(2));
+ pwm6pin |= creb & BIT(2);
+ break;
+ case nct6796:
+ fan5pin |= cr1b & BIT(5);
+ fan5pin |= (cre0 & BIT(3)) && !(cr1b & BIT(0));
+ fan5pin |= creb & BIT(5);
+
+ fan6pin = (cr2a & BIT(4)) &&
+ (!dsw_en || (cred & BIT(4)));
+ fan6pin |= creb & BIT(3);
+
+ fan7pin = !(cr2b & BIT(2));
+
+ pwm5pin |= cr2d & BIT(7);
+ pwm5pin |= (cre0 & BIT(4)) && !(cr1b & BIT(0));
+ pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
+
+ pwm6pin = (cr2a & BIT(3)) && (cred & BIT(2));
+ pwm6pin |= creb & BIT(2);
+
+ pwm7pin = !(cr1d & (BIT(2) | BIT(3)));
+ break;
+ case nct6797:
+ fan5pin |= !ddr4_en && (cr1b & BIT(5));
+ fan5pin |= creb & BIT(5);
+
+ fan6pin = cr2a & BIT(4);
+ fan6pin |= creb & BIT(3);
+
+ fan7pin = cr1a & BIT(1);
+
+ pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
+ pwm5pin |= !ddr4_en && (cr2d & BIT(7));
+
+ pwm6pin = creb & BIT(2);
+ pwm6pin |= cred & BIT(2);
+
+ pwm7pin = cr1d & BIT(4);
+ break;
+ case nct6798:
+ fan6pin = !(cr1b & BIT(0)) && (cre0 & BIT(3));
+ fan6pin |= cr2a & BIT(4);
+ fan6pin |= creb & BIT(5);
+
+ fan7pin = cr1b & BIT(5);
+ fan7pin |= !(cr2b & BIT(2));
+ fan7pin |= creb & BIT(3);
+
+ pwm6pin = !(cr1b & BIT(0)) && (cre0 & BIT(4));
+ pwm6pin |= !(cred & BIT(2)) && (cr2a & BIT(3));
+ pwm6pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
+
+ pwm7pin = !(cr1d & (BIT(2) | BIT(3)));
+ pwm7pin |= cr2d & BIT(7);
+ pwm7pin |= creb & BIT(2);
+ break;
+ default: /* NCT6779D */
+ break;
+ }
+
+ fan4min = fan4pin;
+ }
+
+ /* fan 1 and 2 (0x03) are always present */
+ data->has_fan = 0x03 | (fan3pin << 2) | (fan4pin << 3) |
+ (fan5pin << 4) | (fan6pin << 5) | (fan7pin << 6);
+ data->has_fan_min = 0x03 | (fan3pin << 2) | (fan4min << 3) |
+ (fan5pin << 4) | (fan6pin << 5) | (fan7pin << 6);
+ data->has_pwm = 0x03 | (pwm3pin << 2) | (pwm4pin << 3) |
+ (pwm5pin << 4) | (pwm6pin << 5) | (pwm7pin << 6);
+}
+
+static ssize_t
+cpu0_vid_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct nct6775_data *data = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
+}
+
+static DEVICE_ATTR_RO(cpu0_vid);
+
+/* Case open detection */
+
+static const u8 NCT6775_REG_CR_CASEOPEN_CLR[] = { 0xe6, 0xee };
+static const u8 NCT6775_CR_CASEOPEN_CLR_MASK[] = { 0x20, 0x01 };
+
+static ssize_t
+clear_caseopen(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct nct6775_data *data = dev_get_drvdata(dev);
+ struct nct6775_sio_data *sio_data = data->driver_data;
+ int nr = to_sensor_dev_attr(attr)->index - INTRUSION_ALARM_BASE;
+ unsigned long val;
+ u8 reg;
+ int ret;
+
+ if (kstrtoul(buf, 10, &val) || val != 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+
+ /*
+ * Use CR registers to clear caseopen status.
+ * The CR registers are the same for all chips, and not all chips
+ * support clearing the caseopen status through "regular" registers.
+ */
+ ret = sio_data->sio_enter(sio_data);
+ if (ret) {
+ count = ret;
+ goto error;
+ }
+
+ sio_data->sio_select(sio_data, NCT6775_LD_ACPI);
+ reg = sio_data->sio_inb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr]);
+ reg |= NCT6775_CR_CASEOPEN_CLR_MASK[nr];
+ sio_data->sio_outb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr], reg);
+ reg &= ~NCT6775_CR_CASEOPEN_CLR_MASK[nr];
+ sio_data->sio_outb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr], reg);
+ sio_data->sio_exit(sio_data);
+
+ data->valid = false; /* Force cache refresh */
+error:
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR(intrusion0_alarm, 0644, nct6775_show_alarm,
+ clear_caseopen, INTRUSION_ALARM_BASE);
+static SENSOR_DEVICE_ATTR(intrusion1_alarm, 0644, nct6775_show_alarm,
+ clear_caseopen, INTRUSION_ALARM_BASE + 1);
+static SENSOR_DEVICE_ATTR(intrusion0_beep, 0644, nct6775_show_beep,
+ nct6775_store_beep, INTRUSION_ALARM_BASE);
+static SENSOR_DEVICE_ATTR(intrusion1_beep, 0644, nct6775_show_beep,
+ nct6775_store_beep, INTRUSION_ALARM_BASE + 1);
+static SENSOR_DEVICE_ATTR(beep_enable, 0644, nct6775_show_beep,
+ nct6775_store_beep, BEEP_ENABLE_BASE);
+
+static umode_t nct6775_other_is_visible(struct kobject *kobj,
+ struct attribute *attr, int index)
+{
+ struct device *dev = kobj_to_dev(kobj);
+ struct nct6775_data *data = dev_get_drvdata(dev);
+
+ if (index == 0 && !data->have_vid)
+ return 0;
+
+ if (index == 1 || index == 2) {
+ if (data->ALARM_BITS[INTRUSION_ALARM_BASE + index - 1] < 0)
+ return 0;
+ }
+
+ if (index == 3 || index == 4) {
+ if (data->BEEP_BITS[INTRUSION_ALARM_BASE + index - 3] < 0)
+ return 0;
+ }
+
+ return nct6775_attr_mode(data, attr);
+}
+
+/*
+ * nct6775_other_is_visible uses the index into the following array
+ * to determine if attributes should be created or not.
+ * Any change in order or content must be matched.
+ */
+static struct attribute *nct6775_attributes_other[] = {
+ &dev_attr_cpu0_vid.attr, /* 0 */
+ &sensor_dev_attr_intrusion0_alarm.dev_attr.attr, /* 1 */
+ &sensor_dev_attr_intrusion1_alarm.dev_attr.attr, /* 2 */
+ &sensor_dev_attr_intrusion0_beep.dev_attr.attr, /* 3 */
+ &sensor_dev_attr_intrusion1_beep.dev_attr.attr, /* 4 */
+ &sensor_dev_attr_beep_enable.dev_attr.attr, /* 5 */
+
+ NULL
+};
+
+static const struct attribute_group nct6775_group_other = {
+ .attrs = nct6775_attributes_other,
+ .is_visible = nct6775_other_is_visible,
+};
+
+static int nct6775_platform_probe_init(struct nct6775_data *data)
+{
+ int err;
+ u8 cr2a;
+ struct nct6775_sio_data *sio_data = data->driver_data;
+
+ err = sio_data->sio_enter(sio_data);
+ if (err)
+ return err;
+
+ cr2a = sio_data->sio_inb(sio_data, 0x2a);
+ switch (data->kind) {
+ case nct6775:
+ data->have_vid = (cr2a & 0x40);
+ break;
+ case nct6776:
+ data->have_vid = (cr2a & 0x60) == 0x40;
+ break;
+ case nct6106:
+ case nct6116:
+ case nct6779:
+ case nct6791:
+ case nct6792:
+ case nct6793:
+ case nct6795:
+ case nct6796:
+ case nct6797:
+ case nct6798:
+ break;
+ }
+
+ /*
+ * Read VID value
+ * We can get the VID input values directly at logical device D 0xe3.
+ */
+ if (data->have_vid) {
+ sio_data->sio_select(sio_data, NCT6775_LD_VID);
+ data->vid = sio_data->sio_inb(sio_data, 0xe3);
+ data->vrm = vid_which_vrm();
+ }
+
+ if (fan_debounce) {
+ u8 tmp;
+
+ sio_data->sio_select(sio_data, NCT6775_LD_HWM);
+ tmp = sio_data->sio_inb(sio_data,
+ NCT6775_REG_CR_FAN_DEBOUNCE);
+ switch (data->kind) {
+ case nct6106:
+ case nct6116:
+ tmp |= 0xe0;
+ break;
+ case nct6775:
+ tmp |= 0x1e;
+ break;
+ case nct6776:
+ case nct6779:
+ tmp |= 0x3e;
+ break;
+ case nct6791:
+ case nct6792:
+ case nct6793:
+ case nct6795:
+ case nct6796:
+ case nct6797:
+ case nct6798:
+ tmp |= 0x7e;
+ break;
+ }
+ sio_data->sio_outb(sio_data, NCT6775_REG_CR_FAN_DEBOUNCE,
+ tmp);
+ pr_info("Enabled fan debounce for chip %s\n", data->name);
+ }
+
+ nct6775_check_fan_inputs(data, sio_data);
+
+ sio_data->sio_exit(sio_data);
+
+ return nct6775_add_attr_group(data, &nct6775_group_other);
+}
+
+static const struct regmap_config nct6775_regmap_config = {
+ .reg_bits = 16,
+ .val_bits = 16,
+ .reg_read = nct6775_reg_read,
+ .reg_write = nct6775_reg_write,
+};
+
+static const struct regmap_config nct6775_wmi_regmap_config = {
+ .reg_bits = 16,
+ .val_bits = 16,
+ .reg_read = nct6775_wmi_reg_read,
+ .reg_write = nct6775_wmi_reg_write,
+};
+
+static int nct6775_platform_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct nct6775_sio_data *sio_data = dev_get_platdata(dev);
+ struct nct6775_data *data;
+ struct resource *res;
+ const struct regmap_config *regmapcfg;
+
+ if (sio_data->access == access_direct) {
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!devm_request_region(&pdev->dev, res->start, IOREGION_LENGTH, DRVNAME))
+ return -EBUSY;
+ }
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->kind = sio_data->kind;
+ data->sioreg = sio_data->sioreg;
+
+ if (sio_data->access == access_direct) {
+ data->addr = res->start;
+ regmapcfg = &nct6775_regmap_config;
+ } else {
+ regmapcfg = &nct6775_wmi_regmap_config;
+ }
+
+ platform_set_drvdata(pdev, data);
+
+ data->driver_data = sio_data;
+ data->driver_init = nct6775_platform_probe_init;
+
+ return nct6775_probe(&pdev->dev, data, regmapcfg);
+}
+
+static struct platform_driver nct6775_driver = {
+ .driver = {
+ .name = DRVNAME,
+ .pm = &nct6775_dev_pm_ops,
+ },
+ .probe = nct6775_platform_probe,
+};
+
+/* nct6775_find() looks for a '627 in the Super-I/O config space */
+static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data)
+{
+ u16 val;
+ int err;
+ int addr;
+
+ sio_data->access = access_direct;
+ sio_data->sioreg = sioaddr;
+
+ err = sio_data->sio_enter(sio_data);
+ if (err)
+ return err;
+
+ val = (sio_data->sio_inb(sio_data, SIO_REG_DEVID) << 8) |
+ sio_data->sio_inb(sio_data, SIO_REG_DEVID + 1);
+ if (force_id && val != 0xffff)
+ val = force_id;
+
+ switch (val & SIO_ID_MASK) {
+ case SIO_NCT6106_ID:
+ sio_data->kind = nct6106;
+ break;
+ case SIO_NCT6116_ID:
+ sio_data->kind = nct6116;
+ break;
+ case SIO_NCT6775_ID:
+ sio_data->kind = nct6775;
+ break;
+ case SIO_NCT6776_ID:
+ sio_data->kind = nct6776;
+ break;
+ case SIO_NCT6779_ID:
+ sio_data->kind = nct6779;
+ break;
+ case SIO_NCT6791_ID:
+ sio_data->kind = nct6791;
+ break;
+ case SIO_NCT6792_ID:
+ sio_data->kind = nct6792;
+ break;
+ case SIO_NCT6793_ID:
+ sio_data->kind = nct6793;
+ break;
+ case SIO_NCT6795_ID:
+ sio_data->kind = nct6795;
+ break;
+ case SIO_NCT6796_ID:
+ sio_data->kind = nct6796;
+ break;
+ case SIO_NCT6797_ID:
+ sio_data->kind = nct6797;
+ break;
+ case SIO_NCT6798_ID:
+ sio_data->kind = nct6798;
+ break;
+ default:
+ if (val != 0xffff)
+ pr_debug("unsupported chip ID: 0x%04x\n", val);
+ sio_data->sio_exit(sio_data);
+ return -ENODEV;
+ }
+
+ /* We have a known chip, find the HWM I/O address */
+ sio_data->sio_select(sio_data, NCT6775_LD_HWM);
+ val = (sio_data->sio_inb(sio_data, SIO_REG_ADDR) << 8)
+ | sio_data->sio_inb(sio_data, SIO_REG_ADDR + 1);
+ addr = val & IOREGION_ALIGNMENT;
+ if (addr == 0) {
+ pr_err("Refusing to enable a Super-I/O device with a base I/O port 0\n");
+ sio_data->sio_exit(sio_data);
+ return -ENODEV;
+ }
+
+ /* Activate logical device if needed */
+ val = sio_data->sio_inb(sio_data, SIO_REG_ENABLE);
+ if (!(val & 0x01)) {
+ pr_warn("Forcibly enabling Super-I/O. Sensor is probably unusable.\n");
+ sio_data->sio_outb(sio_data, SIO_REG_ENABLE, val | 0x01);
+ }
+
+ if (sio_data->kind == nct6791 || sio_data->kind == nct6792 ||
+ sio_data->kind == nct6793 || sio_data->kind == nct6795 ||
+ sio_data->kind == nct6796 || sio_data->kind == nct6797 ||
+ sio_data->kind == nct6798)
+ nct6791_enable_io_mapping(sio_data);
+
+ sio_data->sio_exit(sio_data);
+ pr_info("Found %s or compatible chip at %#x:%#x\n",
+ nct6775_sio_names[sio_data->kind], sioaddr, addr);
+
+ return addr;
+}
+
+/*
+ * when Super-I/O functions move to a separate file, the Super-I/O
+ * bus will manage the lifetime of the device and this module will only keep
+ * track of the nct6775 driver. But since we use platform_device_alloc(), we
+ * must keep track of the device
+ */
+static struct platform_device *pdev[2];
+
+static const char * const asus_wmi_boards[] = {
+ "ProArt X570-CREATOR WIFI",
+ "Pro B550M-C",
+ "Pro WS X570-ACE",
+ "PRIME B360-PLUS",
+ "PRIME B460-PLUS",
+ "PRIME B550-PLUS",
+ "PRIME B550M-A",
+ "PRIME B550M-A (WI-FI)",
+ "PRIME X570-P",
+ "PRIME X570-PRO",
+ "ROG CROSSHAIR VIII DARK HERO",
+ "ROG CROSSHAIR VIII FORMULA",
+ "ROG CROSSHAIR VIII HERO",
+ "ROG CROSSHAIR VIII IMPACT",
+ "ROG STRIX B550-A GAMING",
+ "ROG STRIX B550-E GAMING",
+ "ROG STRIX B550-F GAMING",
+ "ROG STRIX B550-F GAMING (WI-FI)",
+ "ROG STRIX B550-F GAMING WIFI II",
+ "ROG STRIX B550-I GAMING",
+ "ROG STRIX B550-XE GAMING (WI-FI)",
+ "ROG STRIX X570-E GAMING",
+ "ROG STRIX X570-F GAMING",
+ "ROG STRIX X570-I GAMING",
+ "ROG STRIX Z390-E GAMING",
+ "ROG STRIX Z390-F GAMING",
+ "ROG STRIX Z390-H GAMING",
+ "ROG STRIX Z390-I GAMING",
+ "ROG STRIX Z490-A GAMING",
+ "ROG STRIX Z490-E GAMING",
+ "ROG STRIX Z490-F GAMING",
+ "ROG STRIX Z490-G GAMING",
+ "ROG STRIX Z490-G GAMING (WI-FI)",
+ "ROG STRIX Z490-H GAMING",
+ "ROG STRIX Z490-I GAMING",
+ "TUF GAMING B550M-PLUS",
+ "TUF GAMING B550M-PLUS (WI-FI)",
+ "TUF GAMING B550-PLUS",
+ "TUF GAMING B550-PRO",
+ "TUF GAMING X570-PLUS",
+ "TUF GAMING X570-PLUS (WI-FI)",
+ "TUF GAMING X570-PRO (WI-FI)",
+ "TUF GAMING Z490-PLUS",
+ "TUF GAMING Z490-PLUS (WI-FI)",
+};
+
+static int __init sensors_nct6775_platform_init(void)
+{
+ int i, err;
+ bool found = false;
+ int address;
+ struct resource res;
+ struct nct6775_sio_data sio_data;
+ int sioaddr[2] = { 0x2e, 0x4e };
+ enum sensor_access access = access_direct;
+ const char *board_vendor, *board_name;
+ u8 tmp;
+
+ err = platform_driver_register(&nct6775_driver);
+ if (err)
+ return err;
+
+ board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+ board_name = dmi_get_system_info(DMI_BOARD_NAME);
+
+ if (board_name && board_vendor &&
+ !strcmp(board_vendor, "ASUSTeK COMPUTER INC.")) {
+ err = match_string(asus_wmi_boards, ARRAY_SIZE(asus_wmi_boards),
+ board_name);
+ if (err >= 0) {
+ /* if reading chip id via WMI succeeds, use WMI */
+ if (!nct6775_asuswmi_read(0, NCT6775_PORT_CHIPID, &tmp) && tmp) {
+ pr_info("Using Asus WMI to access %#x chip.\n", tmp);
+ access = access_asuswmi;
+ } else {
+ pr_err("Can't read ChipID by Asus WMI.\n");
+ }
+ }
+ }
+
+ /*
+ * initialize sio_data->kind and sio_data->sioreg.
+ *
+ * when Super-I/O functions move to a separate file, the Super-I/O
+ * driver will probe 0x2e and 0x4e and auto-detect the presence of a
+ * nct6775 hardware monitor, and call probe()
+ */
+ for (i = 0; i < ARRAY_SIZE(pdev); i++) {
+ sio_data.sio_outb = superio_outb;
+ sio_data.sio_inb = superio_inb;
+ sio_data.sio_select = superio_select;
+ sio_data.sio_enter = superio_enter;
+ sio_data.sio_exit = superio_exit;
+
+ address = nct6775_find(sioaddr[i], &sio_data);
+ if (address <= 0)
+ continue;
+
+ found = true;
+
+ sio_data.access = access;
+
+ if (access == access_asuswmi) {
+ sio_data.sio_outb = superio_wmi_outb;
+ sio_data.sio_inb = superio_wmi_inb;
+ sio_data.sio_select = superio_wmi_select;
+ sio_data.sio_enter = superio_wmi_enter;
+ sio_data.sio_exit = superio_wmi_exit;
+ }
+
+ pdev[i] = platform_device_alloc(DRVNAME, address);
+ if (!pdev[i]) {
+ err = -ENOMEM;
+ goto exit_device_unregister;
+ }
+
+ err = platform_device_add_data(pdev[i], &sio_data,
+ sizeof(struct nct6775_sio_data));
+ if (err)
+ goto exit_device_put;
+
+ if (sio_data.access == access_direct) {
+ memset(&res, 0, sizeof(res));
+ res.name = DRVNAME;
+ res.start = address + IOREGION_OFFSET;
+ res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1;
+ res.flags = IORESOURCE_IO;
+
+ err = acpi_check_resource_conflict(&res);
+ if (err) {
+ platform_device_put(pdev[i]);
+ pdev[i] = NULL;
+ continue;
+ }
+
+ err = platform_device_add_resources(pdev[i], &res, 1);
+ if (err)
+ goto exit_device_put;
+ }
+
+ /* platform_device_add calls probe() */
+ err = platform_device_add(pdev[i]);
+ if (err)
+ goto exit_device_put;
+ }
+ if (!found) {
+ err = -ENODEV;
+ goto exit_unregister;
+ }
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(pdev[i]);
+exit_device_unregister:
+ while (--i >= 0) {
+ if (pdev[i])
+ platform_device_unregister(pdev[i]);
+ }
+exit_unregister:
+ platform_driver_unregister(&nct6775_driver);
+ return err;
+}
+
+static void __exit sensors_nct6775_platform_exit(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(pdev); i++) {
+ if (pdev[i])
+ platform_device_unregister(pdev[i]);
+ }
+ platform_driver_unregister(&nct6775_driver);
+}
+
+MODULE_AUTHOR("Guenter Roeck <linux@xxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Platform driver for NCT6775F and compatible chips");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(HWMON_NCT6775);
+
+module_init(sensors_nct6775_platform_init);
+module_exit(sensors_nct6775_platform_exit);
diff --git a/drivers/hwmon/nct6775.h b/drivers/hwmon/nct6775.h
new file mode 100644
index 000000000000..93f708148e65
--- /dev/null
+++ b/drivers/hwmon/nct6775.h
@@ -0,0 +1,252 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef __HWMON_NCT6775_H__
+#define __HWMON_NCT6775_H__
+
+#include <linux/types.h>
+
+enum kinds { nct6106, nct6116, nct6775, nct6776, nct6779, nct6791, nct6792,
+ nct6793, nct6795, nct6796, nct6797, nct6798 };
+enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 };
+
+#define NUM_TEMP 10 /* Max number of temp attribute sets w/ limits*/
+#define NUM_TEMP_FIXED 6 /* Max number of fixed temp attribute sets */
+#define NUM_TSI_TEMP 8 /* Max number of TSI temp register pairs */
+
+#define NUM_REG_ALARM 7 /* Max number of alarm registers */
+#define NUM_REG_BEEP 5 /* Max number of beep registers */
+
+#define NUM_FAN 7
+
+struct nct6775_data {
+ int addr; /* IO base of hw monitor block */
+ int sioreg; /* SIO register address */
+ enum kinds kind;
+ const char *name;
+
+ const struct attribute_group *groups[7];
+ u8 num_groups;
+
+ u16 reg_temp[5][NUM_TEMP]; /* 0=temp, 1=temp_over, 2=temp_hyst,
+ * 3=temp_crit, 4=temp_lcrit
+ */
+ u8 temp_src[NUM_TEMP];
+ u16 reg_temp_config[NUM_TEMP];
+ const char * const *temp_label;
+ u32 temp_mask;
+ u32 virt_temp_mask;
+
+ u16 REG_CONFIG;
+ u16 REG_VBAT;
+ u16 REG_DIODE;
+ u8 DIODE_MASK;
+
+ const s8 *ALARM_BITS;
+ const s8 *BEEP_BITS;
+
+ const u16 *REG_VIN;
+ const u16 *REG_IN_MINMAX[2];
+
+ const u16 *REG_TARGET;
+ const u16 *REG_FAN;
+ const u16 *REG_FAN_MODE;
+ const u16 *REG_FAN_MIN;
+ const u16 *REG_FAN_PULSES;
+ const u16 *FAN_PULSE_SHIFT;
+ const u16 *REG_FAN_TIME[3];
+
+ const u16 *REG_TOLERANCE_H;
+
+ const u8 *REG_PWM_MODE;
+ const u8 *PWM_MODE_MASK;
+
+ const u16 *REG_PWM[7]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor,
+ * [3]=pwm_max, [4]=pwm_step,
+ * [5]=weight_duty_step, [6]=weight_duty_base
+ */
+ const u16 *REG_PWM_READ;
+
+ const u16 *REG_CRITICAL_PWM_ENABLE;
+ u8 CRITICAL_PWM_ENABLE_MASK;
+ const u16 *REG_CRITICAL_PWM;
+
+ const u16 *REG_AUTO_TEMP;
+ const u16 *REG_AUTO_PWM;
+
+ const u16 *REG_CRITICAL_TEMP;
+ const u16 *REG_CRITICAL_TEMP_TOLERANCE;
+
+ const u16 *REG_TEMP_SOURCE; /* temp register sources */
+ const u16 *REG_TEMP_SEL;
+ const u16 *REG_WEIGHT_TEMP_SEL;
+ const u16 *REG_WEIGHT_TEMP[3]; /* 0=base, 1=tolerance, 2=step */
+
+ const u16 *REG_TEMP_OFFSET;
+
+ const u16 *REG_ALARM;
+ const u16 *REG_BEEP;
+
+ const u16 *REG_TSI_TEMP;
+
+ unsigned int (*fan_from_reg)(u16 reg, unsigned int divreg);
+ unsigned int (*fan_from_reg_min)(u16 reg, unsigned int divreg);
+
+ struct mutex update_lock;
+ bool valid; /* true if following fields are valid */
+ unsigned long last_updated; /* In jiffies */
+
+ /* Register values */
+ u8 bank; /* current register bank */
+ u8 in_num; /* number of in inputs we have */
+ u8 in[15][3]; /* [0]=in, [1]=in_max, [2]=in_min */
+ unsigned int rpm[NUM_FAN];
+ u16 fan_min[NUM_FAN];
+ u8 fan_pulses[NUM_FAN];
+ u8 fan_div[NUM_FAN];
+ u8 has_pwm;
+ u8 has_fan; /* some fan inputs can be disabled */
+ u8 has_fan_min; /* some fans don't have min register */
+ bool has_fan_div;
+
+ u8 num_temp_alarms; /* 2, 3, or 6 */
+ u8 num_temp_beeps; /* 2, 3, or 6 */
+ u8 temp_fixed_num; /* 3 or 6 */
+ u8 temp_type[NUM_TEMP_FIXED];
+ s8 temp_offset[NUM_TEMP_FIXED];
+ s16 temp[5][NUM_TEMP]; /* 0=temp, 1=temp_over, 2=temp_hyst,
+ * 3=temp_crit, 4=temp_lcrit
+ */
+ s16 tsi_temp[NUM_TSI_TEMP];
+ u64 alarms;
+ u64 beeps;
+
+ u8 pwm_num; /* number of pwm */
+ u8 pwm_mode[NUM_FAN]; /* 0->DC variable voltage,
+ * 1->PWM variable duty cycle
+ */
+ enum pwm_enable pwm_enable[NUM_FAN];
+ /* 0->off
+ * 1->manual
+ * 2->thermal cruise mode (also called SmartFan I)
+ * 3->fan speed cruise mode
+ * 4->SmartFan III
+ * 5->enhanced variable thermal cruise (SmartFan IV)
+ */
+ u8 pwm[7][NUM_FAN]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor,
+ * [3]=pwm_max, [4]=pwm_step,
+ * [5]=weight_duty_step, [6]=weight_duty_base
+ */
+
+ u8 target_temp[NUM_FAN];
+ u8 target_temp_mask;
+ u32 target_speed[NUM_FAN];
+ u32 target_speed_tolerance[NUM_FAN];
+ u8 speed_tolerance_limit;
+
+ u8 temp_tolerance[2][NUM_FAN];
+ u8 tolerance_mask;
+
+ u8 fan_time[3][NUM_FAN]; /* 0 = stop_time, 1 = step_up, 2 = step_down */
+
+ /* Automatic fan speed control registers */
+ int auto_pwm_num;
+ u8 auto_pwm[NUM_FAN][7];
+ u8 auto_temp[NUM_FAN][7];
+ u8 pwm_temp_sel[NUM_FAN];
+ u8 pwm_weight_temp_sel[NUM_FAN];
+ u8 weight_temp[3][NUM_FAN]; /* 0->temp_step, 1->temp_step_tol,
+ * 2->temp_base
+ */
+
+ u8 vid;
+ u8 vrm;
+
+ bool have_vid;
+
+ u16 have_temp;
+ u16 have_temp_fixed;
+ u16 have_tsi_temp;
+ u16 have_in;
+
+ /* Remember extra register values over suspend/resume */
+ u8 vbat;
+ u8 fandiv1;
+ u8 fandiv2;
+ u8 sio_reg_enable;
+
+ struct regmap *regmap;
+ bool read_only;
+
+ /* driver-specific (platform, i2c) initialization hook and data */
+ int (*driver_init)(struct nct6775_data *data);
+ void *driver_data;
+};
+
+static inline int nct6775_read_value(struct nct6775_data *data, u16 reg, u16 *value)
+{
+ unsigned int tmp;
+ int ret = regmap_read(data->regmap, reg, &tmp);
+
+ if (!ret)
+ *value = tmp;
+ return ret;
+}
+
+static inline int nct6775_write_value(struct nct6775_data *data, u16 reg, u16 value)
+{
+ return regmap_write(data->regmap, reg, value);
+}
+
+bool nct6775_reg_is_word_sized(struct nct6775_data *data, u16 reg);
+int nct6775_probe(struct device *dev, struct nct6775_data *data,
+ const struct regmap_config *regmapcfg);
+
+ssize_t nct6775_show_alarm(struct device *dev, struct device_attribute *attr, char *buf);
+ssize_t nct6775_show_beep(struct device *dev, struct device_attribute *attr, char *buf);
+ssize_t nct6775_store_beep(struct device *dev, struct device_attribute *attr, const char *buf,
+ size_t count);
+
+static inline int nct6775_write_temp(struct nct6775_data *data, u16 reg, u16 value)
+{
+ if (!nct6775_reg_is_word_sized(data, reg))
+ value >>= 8;
+ return nct6775_write_value(data, reg, value);
+}
+
+static inline umode_t nct6775_attr_mode(struct nct6775_data *data, struct attribute *attr)
+{
+ return data->read_only ? (attr->mode & ~0222) : attr->mode;
+}
+
+static inline int
+nct6775_add_attr_group(struct nct6775_data *data, const struct attribute_group *group)
+{
+ /* Need to leave a NULL terminator at the end of data->groups */
+ if (data->num_groups == ARRAY_SIZE(data->groups) - 1)
+ return -ENOBUFS;
+
+ data->groups[data->num_groups++] = group;
+ return 0;
+}
+
+#define NCT6775_REG_BANK 0x4E
+#define NCT6775_REG_CONFIG 0x40
+
+#define NCT6775_REG_FANDIV1 0x506
+#define NCT6775_REG_FANDIV2 0x507
+
+#define NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE 0x28
+
+#define FAN_ALARM_BASE 16
+#define TEMP_ALARM_BASE 24
+#define INTRUSION_ALARM_BASE 30
+#define BEEP_ENABLE_BASE 15
+
+/*
+ * Not currently used:
+ * REG_MAN_ID has the value 0x5ca3 for all supported chips.
+ * REG_CHIP_ID == 0x88/0xa1/0xc1 depending on chip model.
+ * REG_MAN_ID is at port 0x4f
+ * REG_CHIP_ID is at port 0x58
+ */
+
+#endif /* __HWMON_NCT6775_H__ */
--
2.36.0
