On Tue, Mar 08, 2022 at 04:50:46PM -0800, Zev Weiss wrote:
> This splits the nct6775 driver into an interface-independent core and
> a separate platform driver that wraps inb/outb port I/O (or asuswmi
> methods) around that core.
>
> Signed-off-by: Zev Weiss <zev@xxxxxxxxxxxxxxxxx>
> Tested-by: Renze Nicolai <renze@xxxxxxxxx>
> ---
> MAINTAINERS | 6 +-
> drivers/hwmon/Kconfig | 15 +-
> drivers/hwmon/Makefile | 3 +-
> drivers/hwmon/{nct6775.c => nct6775-core.c} | 1465 +------------------
> drivers/hwmon/nct6775-platform.c | 1232 ++++++++++++++++
> drivers/hwmon/nct6775.h | 252 ++++
> 6 files changed, 1532 insertions(+), 1441 deletions(-)
> rename drivers/hwmon/{nct6775.c => nct6775-core.c} (76%)
> create mode 100644 drivers/hwmon/nct6775-platform.c
> create mode 100644 drivers/hwmon/nct6775.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a9c9ee378f93..f093e40d2b16 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13287,12 +13287,14 @@ M: Samuel Mendoza-Jonas <sam@xxxxxxxxxxxxxxxx>
> S: Maintained
> F: net/ncsi/
>
> -NCT6775 HARDWARE MONITOR DRIVER
> +NCT6775 HARDWARE MONITOR DRIVER - CORE & PLATFORM DRIVER
> M: Guenter Roeck <linux@xxxxxxxxxxxx>
> L: linux-hwmon@xxxxxxxxxxxxxxx
> S: Maintained
> F: Documentation/hwmon/nct6775.rst
> -F: drivers/hwmon/nct6775.c
> +F: drivers/hwmon/nct6775-core.c
> +F: drivers/hwmon/nct6775-platform.c
> +F: drivers/hwmon/nct6775.h
>
> NETDEVSIM
> M: Jakub Kicinski <kuba@xxxxxxxxxx>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 9ab4e9b3d27b..1c657100c392 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -1458,9 +1458,20 @@ config SENSORS_NCT6683
> will be called nct6683.
>
> config SENSORS_NCT6775
> - tristate "Nuvoton NCT6775F and compatibles"
> + tristate
> + help
> + This module contains common code shared by the platform and
> + i2c versions of the nct6775 driver; it is not useful on its
> + own.
> +
> + If built as a module, the module will be called
> + nct6775-core.
> +
> +config SENSORS_NCT6775_PLATFORM
> + tristate "Platform driver for Nuvoton NCT6775F and compatibles"
> depends on !PPC
> depends on ACPI_WMI || ACPI_WMI=n
> + select SENSORS_NCT6775
> select HWMON_VID
> help
> If you say yes here you get support for the hardware monitoring
> @@ -1470,7 +1481,7 @@ config SENSORS_NCT6775
> NCT6775F and NCT6776F.
>
> This driver can also be built as a module. If so, the module
> - will be called nct6775.
> + will be called nct6775-platform.
This is wrong. The platform driver should still be named "nct6775",
configured with SENSORS_NCT6775, with the current dependencies.
There should be a new SENSORS_NCT6775_CORE, which is auto-selected
from SENSORS_NCT6775 and can not be manually selected. The new
SENSORS_NCT6775_I2C should also auto-select SENSORS_NCT6775_CORE.
User visible options should only be SENSORS_NCT6775 and
SENSORS_NCT6775_I2C.
Guenter
>
> config SENSORS_NCT7802
> tristate "Nuvoton NCT7802Y"
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 4ed138d0621f..2453c087cf1d 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -154,7 +154,8 @@ obj-$(CONFIG_SENSORS_MLXREG_FAN) += mlxreg-fan.o
> obj-$(CONFIG_SENSORS_MENF21BMC_HWMON) += menf21bmc_hwmon.o
> obj-$(CONFIG_SENSORS_MR75203) += mr75203.o
> obj-$(CONFIG_SENSORS_NCT6683) += nct6683.o
> -obj-$(CONFIG_SENSORS_NCT6775) += nct6775.o
> +obj-$(CONFIG_SENSORS_NCT6775) += nct6775-core.o
> +obj-$(CONFIG_SENSORS_NCT6775_PLATFORM) += nct6775-platform.o
> obj-$(CONFIG_SENSORS_NCT7802) += nct7802.o
> obj-$(CONFIG_SENSORS_NCT7904) += nct7904.o
> obj-$(CONFIG_SENSORS_NPCM7XX) += npcm750-pwm-fan.o
> diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775-core.c
> similarity index 76%
> rename from drivers/hwmon/nct6775.c
> rename to drivers/hwmon/nct6775-core.c
> index 99b4e308a053..cb3958c977fa 100644
> --- a/drivers/hwmon/nct6775.c
> +++ b/drivers/hwmon/nct6775-core.c
> @@ -44,25 +44,20 @@
> #include <linux/init.h>
> #include <linux/slab.h>
> #include <linux/jiffies.h>
> -#include <linux/platform_device.h>
> #include <linux/hwmon.h>
> #include <linux/hwmon-sysfs.h>
> -#include <linux/hwmon-vid.h>
> #include <linux/err.h>
> #include <linux/mutex.h>
> -#include <linux/acpi.h>
> #include <linux/bitops.h>
> -#include <linux/dmi.h>
> -#include <linux/io.h>
> #include <linux/nospec.h>
> #include <linux/regmap.h>
> -#include <linux/wmi.h>
> #include "lm75.h"
> +#include "nct6775.h"
>
> -#define USE_ALTERNATE
> +#undef DEFAULT_SYMBOL_NAMESPACE
> +#define DEFAULT_SYMBOL_NAMESPACE HWMON_NCT6775
>
> -enum kinds { nct6106, nct6116, nct6775, nct6776, nct6779, nct6791, nct6792,
> - nct6793, nct6795, nct6796, nct6797, nct6798 };
> +#define USE_ALTERNATE
>
> /* used to set data->name = nct6775_device_names[data->sio_kind] */
> static const char * const nct6775_device_names[] = {
> @@ -80,242 +75,6 @@ static const char * const nct6775_device_names[] = {
> "nct6798",
> };
>
> -static const char * const nct6775_sio_names[] __initconst = {
> - "NCT6106D",
> - "NCT6116D",
> - "NCT6775F",
> - "NCT6776D/F",
> - "NCT6779D",
> - "NCT6791D",
> - "NCT6792D",
> - "NCT6793D",
> - "NCT6795D",
> - "NCT6796D",
> - "NCT6797D",
> - "NCT6798D",
> -};
> -
> -static unsigned short force_id;
> -module_param(force_id, ushort, 0);
> -MODULE_PARM_DESC(force_id, "Override the detected device ID");
> -
> -static unsigned short fan_debounce;
> -module_param(fan_debounce, ushort, 0);
> -MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal");
> -
> -#define DRVNAME "nct6775"
> -
> -/*
> - * Super-I/O constants and functions
> - */
> -
> -#define NCT6775_LD_ACPI 0x0a
> -#define NCT6775_LD_HWM 0x0b
> -#define NCT6775_LD_VID 0x0d
> -#define NCT6775_LD_12 0x12
> -
> -#define SIO_REG_LDSEL 0x07 /* Logical device select */
> -#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */
> -#define SIO_REG_ENABLE 0x30 /* Logical device enable */
> -#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
> -
> -#define SIO_NCT6106_ID 0xc450
> -#define SIO_NCT6116_ID 0xd280
> -#define SIO_NCT6775_ID 0xb470
> -#define SIO_NCT6776_ID 0xc330
> -#define SIO_NCT6779_ID 0xc560
> -#define SIO_NCT6791_ID 0xc800
> -#define SIO_NCT6792_ID 0xc910
> -#define SIO_NCT6793_ID 0xd120
> -#define SIO_NCT6795_ID 0xd350
> -#define SIO_NCT6796_ID 0xd420
> -#define SIO_NCT6797_ID 0xd450
> -#define SIO_NCT6798_ID 0xd428
> -#define SIO_ID_MASK 0xFFF8
> -
> -enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 };
> -enum sensor_access { access_direct, access_asuswmi };
> -
> -struct nct6775_sio_data {
> - int sioreg;
> - int ld;
> - enum kinds kind;
> - enum sensor_access access;
> -
> - /* superio_() callbacks */
> - void (*sio_outb)(struct nct6775_sio_data *sio_data, int reg, int val);
> - int (*sio_inb)(struct nct6775_sio_data *sio_data, int reg);
> - void (*sio_select)(struct nct6775_sio_data *sio_data, int ld);
> - int (*sio_enter)(struct nct6775_sio_data *sio_data);
> - void (*sio_exit)(struct nct6775_sio_data *sio_data);
> -};
> -
> -#define ASUSWMI_MONITORING_GUID "466747A0-70EC-11DE-8A39-0800200C9A66"
> -#define ASUSWMI_METHODID_RSIO 0x5253494F
> -#define ASUSWMI_METHODID_WSIO 0x5753494F
> -#define ASUSWMI_METHODID_RHWM 0x5248574D
> -#define ASUSWMI_METHODID_WHWM 0x5748574D
> -#define ASUSWMI_UNSUPPORTED_METHOD 0xFFFFFFFE
> -
> -static int nct6775_asuswmi_evaluate_method(u32 method_id, u8 bank, u8 reg, u8 val, u32 *retval)
> -{
> -#if IS_ENABLED(CONFIG_ACPI_WMI)
> - u32 args = bank | (reg << 8) | (val << 16);
> - struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
> - struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
> - acpi_status status;
> - union acpi_object *obj;
> - u32 tmp = ASUSWMI_UNSUPPORTED_METHOD;
> -
> - status = wmi_evaluate_method(ASUSWMI_MONITORING_GUID, 0,
> - method_id, &input, &output);
> -
> - if (ACPI_FAILURE(status))
> - return -EIO;
> -
> - obj = output.pointer;
> - if (obj && obj->type == ACPI_TYPE_INTEGER)
> - tmp = obj->integer.value;
> -
> - if (retval)
> - *retval = tmp;
> -
> - kfree(obj);
> -
> - if (tmp == ASUSWMI_UNSUPPORTED_METHOD)
> - return -ENODEV;
> - return 0;
> -#else
> - return -EOPNOTSUPP;
> -#endif
> -}
> -
> -static inline int nct6775_asuswmi_write(u8 bank, u8 reg, u8 val)
> -{
> - return nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_WHWM, bank,
> - reg, val, NULL);
> -}
> -
> -static inline int nct6775_asuswmi_read(u8 bank, u8 reg, u8 *val)
> -{
> - u32 ret, tmp = 0;
> -
> - ret = nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_RHWM, bank,
> - reg, 0, &tmp);
> - *val = tmp;
> - return ret;
> -}
> -
> -static int superio_wmi_inb(struct nct6775_sio_data *sio_data, int reg)
> -{
> - int tmp = 0;
> -
> - nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_RSIO, sio_data->ld,
> - reg, 0, &tmp);
> - return tmp;
> -}
> -
> -static void superio_wmi_outb(struct nct6775_sio_data *sio_data, int reg, int val)
> -{
> - nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_WSIO, sio_data->ld,
> - reg, val, NULL);
> -}
> -
> -static void superio_wmi_select(struct nct6775_sio_data *sio_data, int ld)
> -{
> - sio_data->ld = ld;
> -}
> -
> -static int superio_wmi_enter(struct nct6775_sio_data *sio_data)
> -{
> - return 0;
> -}
> -
> -static void superio_wmi_exit(struct nct6775_sio_data *sio_data)
> -{
> -}
> -
> -static void superio_outb(struct nct6775_sio_data *sio_data, int reg, int val)
> -{
> - int ioreg = sio_data->sioreg;
> -
> - outb(reg, ioreg);
> - outb(val, ioreg + 1);
> -}
> -
> -static int superio_inb(struct nct6775_sio_data *sio_data, int reg)
> -{
> - int ioreg = sio_data->sioreg;
> -
> - outb(reg, ioreg);
> - return inb(ioreg + 1);
> -}
> -
> -static void superio_select(struct nct6775_sio_data *sio_data, int ld)
> -{
> - int ioreg = sio_data->sioreg;
> -
> - outb(SIO_REG_LDSEL, ioreg);
> - outb(ld, ioreg + 1);
> -}
> -
> -static int superio_enter(struct nct6775_sio_data *sio_data)
> -{
> - int ioreg = sio_data->sioreg;
> -
> - /*
> - * Try to reserve <ioreg> and <ioreg + 1> for exclusive access.
> - */
> - if (!request_muxed_region(ioreg, 2, DRVNAME))
> - return -EBUSY;
> -
> - outb(0x87, ioreg);
> - outb(0x87, ioreg);
> -
> - return 0;
> -}
> -
> -static void superio_exit(struct nct6775_sio_data *sio_data)
> -{
> - int ioreg = sio_data->sioreg;
> -
> - outb(0xaa, ioreg);
> - outb(0x02, ioreg);
> - outb(0x02, ioreg + 1);
> - release_region(ioreg, 2);
> -}
> -
> -/*
> - * ISA constants
> - */
> -
> -#define IOREGION_ALIGNMENT (~7)
> -#define IOREGION_OFFSET 5
> -#define IOREGION_LENGTH 2
> -#define ADDR_REG_OFFSET 0
> -#define DATA_REG_OFFSET 1
> -
> -#define NCT6775_REG_BANK 0x4E
> -#define NCT6775_REG_CONFIG 0x40
> -#define NCT6775_PORT_CHIPID 0x58
> -
> -/*
> - * Not currently used:
> - * REG_MAN_ID has the value 0x5ca3 for all supported chips.
> - * REG_CHIP_ID == 0x88/0xa1/0xc1 depending on chip model.
> - * REG_MAN_ID is at port 0x4f
> - * REG_CHIP_ID is at port 0x58
> - */
> -
> -#define NUM_TEMP 10 /* Max number of temp attribute sets w/ limits*/
> -#define NUM_TEMP_FIXED 6 /* Max number of fixed temp attribute sets */
> -#define NUM_TSI_TEMP 8 /* Max number of TSI temp register pairs */
> -
> -#define NUM_REG_ALARM 7 /* Max number of alarm registers */
> -#define NUM_REG_BEEP 5 /* Max number of beep registers */
> -
> -#define NUM_FAN 7
> -
> /* Common and NCT6775 specific data */
>
> /* Voltage min/max registers for nr=7..14 are in bank 5 */
> @@ -334,11 +93,6 @@ static const u16 NCT6775_REG_IN[] = {
> #define NCT6775_REG_DIODE 0x5E
> #define NCT6775_DIODE_MASK 0x02
>
> -#define NCT6775_REG_FANDIV1 0x506
> -#define NCT6775_REG_FANDIV2 0x507
> -
> -#define NCT6775_REG_CR_FAN_DEBOUNCE 0xf0
> -
> static const u16 NCT6775_REG_ALARM[NUM_REG_ALARM] = { 0x459, 0x45A, 0x45B };
>
> /* 0..15 voltages, 16..23 fans, 24..29 temperatures, 30..31 intrusion */
> @@ -352,10 +106,6 @@ static const s8 NCT6775_ALARM_BITS[] = {
> 4, 5, 13, -1, -1, -1, /* temp1..temp6 */
> 12, -1 }; /* intrusion0, intrusion1 */
>
> -#define FAN_ALARM_BASE 16
> -#define TEMP_ALARM_BASE 24
> -#define INTRUSION_ALARM_BASE 30
> -
> static const u16 NCT6775_REG_BEEP[NUM_REG_BEEP] = { 0x56, 0x57, 0x453, 0x4e };
>
> /*
> @@ -371,11 +121,6 @@ static const s8 NCT6775_BEEP_BITS[] = {
> 4, 5, 13, -1, -1, -1, /* temp1..temp6 */
> 12, -1 }; /* intrusion0, intrusion1 */
>
> -#define BEEP_ENABLE_BASE 15
> -
> -static const u8 NCT6775_REG_CR_CASEOPEN_CLR[] = { 0xe6, 0xee };
> -static const u8 NCT6775_CR_CASEOPEN_CLR_MASK[] = { 0x20, 0x01 };
> -
> /* DC or PWM output fan configuration */
> static const u8 NCT6775_REG_PWM_MODE[] = { 0x04, 0x04, 0x12 };
> static const u8 NCT6775_PWM_MODE_MASK[] = { 0x01, 0x02, 0x01 };
> @@ -691,8 +436,6 @@ static const u16 NCT6779_REG_TEMP_CRIT[32] = {
>
> /* NCT6791 specific data */
>
> -#define NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE 0x28
> -
> static const u16 NCT6791_REG_WEIGHT_TEMP_SEL[NUM_FAN] = { 0, 0x239 };
> static const u16 NCT6791_REG_WEIGHT_TEMP_STEP[NUM_FAN] = { 0, 0x23a };
> static const u16 NCT6791_REG_WEIGHT_TEMP_STEP_TOL[NUM_FAN] = { 0, 0x23b };
> @@ -1192,165 +935,6 @@ static inline unsigned int tsi_temp_from_reg(unsigned int reg)
> * Data structures and manipulation thereof
> */
>
> -struct nct6775_data {
> - int addr; /* IO base of hw monitor block */
> - struct nct6775_sio_data *sio_data;
> - enum kinds kind;
> - const char *name;
> -
> - const struct attribute_group *groups[7];
> - u8 num_groups;
> -
> - u16 reg_temp[5][NUM_TEMP]; /* 0=temp, 1=temp_over, 2=temp_hyst,
> - * 3=temp_crit, 4=temp_lcrit
> - */
> - u8 temp_src[NUM_TEMP];
> - u16 reg_temp_config[NUM_TEMP];
> - const char * const *temp_label;
> - u32 temp_mask;
> - u32 virt_temp_mask;
> -
> - u16 REG_CONFIG;
> - u16 REG_VBAT;
> - u16 REG_DIODE;
> - u8 DIODE_MASK;
> -
> - const s8 *ALARM_BITS;
> - const s8 *BEEP_BITS;
> -
> - const u16 *REG_VIN;
> - const u16 *REG_IN_MINMAX[2];
> -
> - const u16 *REG_TARGET;
> - const u16 *REG_FAN;
> - const u16 *REG_FAN_MODE;
> - const u16 *REG_FAN_MIN;
> - const u16 *REG_FAN_PULSES;
> - const u16 *FAN_PULSE_SHIFT;
> - const u16 *REG_FAN_TIME[3];
> -
> - const u16 *REG_TOLERANCE_H;
> -
> - const u8 *REG_PWM_MODE;
> - const u8 *PWM_MODE_MASK;
> -
> - const u16 *REG_PWM[7]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor,
> - * [3]=pwm_max, [4]=pwm_step,
> - * [5]=weight_duty_step, [6]=weight_duty_base
> - */
> - const u16 *REG_PWM_READ;
> -
> - const u16 *REG_CRITICAL_PWM_ENABLE;
> - u8 CRITICAL_PWM_ENABLE_MASK;
> - const u16 *REG_CRITICAL_PWM;
> -
> - const u16 *REG_AUTO_TEMP;
> - const u16 *REG_AUTO_PWM;
> -
> - const u16 *REG_CRITICAL_TEMP;
> - const u16 *REG_CRITICAL_TEMP_TOLERANCE;
> -
> - const u16 *REG_TEMP_SOURCE; /* temp register sources */
> - const u16 *REG_TEMP_SEL;
> - const u16 *REG_WEIGHT_TEMP_SEL;
> - const u16 *REG_WEIGHT_TEMP[3]; /* 0=base, 1=tolerance, 2=step */
> -
> - const u16 *REG_TEMP_OFFSET;
> -
> - const u16 *REG_ALARM;
> - const u16 *REG_BEEP;
> -
> - const u16 *REG_TSI_TEMP;
> -
> - unsigned int (*fan_from_reg)(u16 reg, unsigned int divreg);
> - unsigned int (*fan_from_reg_min)(u16 reg, unsigned int divreg);
> -
> - struct mutex update_lock;
> - bool valid; /* true if following fields are valid */
> - unsigned long last_updated; /* In jiffies */
> -
> - /* Register values */
> - u8 bank; /* current register bank */
> - u8 in_num; /* number of in inputs we have */
> - u8 in[15][3]; /* [0]=in, [1]=in_max, [2]=in_min */
> - unsigned int rpm[NUM_FAN];
> - u16 fan_min[NUM_FAN];
> - u8 fan_pulses[NUM_FAN];
> - u8 fan_div[NUM_FAN];
> - u8 has_pwm;
> - u8 has_fan; /* some fan inputs can be disabled */
> - u8 has_fan_min; /* some fans don't have min register */
> - bool has_fan_div;
> -
> - u8 num_temp_alarms; /* 2, 3, or 6 */
> - u8 num_temp_beeps; /* 2, 3, or 6 */
> - u8 temp_fixed_num; /* 3 or 6 */
> - u8 temp_type[NUM_TEMP_FIXED];
> - s8 temp_offset[NUM_TEMP_FIXED];
> - s16 temp[5][NUM_TEMP]; /* 0=temp, 1=temp_over, 2=temp_hyst,
> - * 3=temp_crit, 4=temp_lcrit */
> - s16 tsi_temp[NUM_TSI_TEMP];
> - u64 alarms;
> - u64 beeps;
> -
> - u8 pwm_num; /* number of pwm */
> - u8 pwm_mode[NUM_FAN]; /* 0->DC variable voltage,
> - * 1->PWM variable duty cycle
> - */
> - enum pwm_enable pwm_enable[NUM_FAN];
> - /* 0->off
> - * 1->manual
> - * 2->thermal cruise mode (also called SmartFan I)
> - * 3->fan speed cruise mode
> - * 4->SmartFan III
> - * 5->enhanced variable thermal cruise (SmartFan IV)
> - */
> - u8 pwm[7][NUM_FAN]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor,
> - * [3]=pwm_max, [4]=pwm_step,
> - * [5]=weight_duty_step, [6]=weight_duty_base
> - */
> -
> - u8 target_temp[NUM_FAN];
> - u8 target_temp_mask;
> - u32 target_speed[NUM_FAN];
> - u32 target_speed_tolerance[NUM_FAN];
> - u8 speed_tolerance_limit;
> -
> - u8 temp_tolerance[2][NUM_FAN];
> - u8 tolerance_mask;
> -
> - u8 fan_time[3][NUM_FAN]; /* 0 = stop_time, 1 = step_up, 2 = step_down */
> -
> - /* Automatic fan speed control registers */
> - int auto_pwm_num;
> - u8 auto_pwm[NUM_FAN][7];
> - u8 auto_temp[NUM_FAN][7];
> - u8 pwm_temp_sel[NUM_FAN];
> - u8 pwm_weight_temp_sel[NUM_FAN];
> - u8 weight_temp[3][NUM_FAN]; /* 0->temp_step, 1->temp_step_tol,
> - * 2->temp_base
> - */
> -
> - u8 vid;
> - u8 vrm;
> -
> - bool have_vid;
> -
> - u16 have_temp;
> - u16 have_temp_fixed;
> - u16 have_tsi_temp;
> - u16 have_in;
> -
> - /* Remember extra register values over suspend/resume */
> - u8 vbat;
> - u8 fandiv1;
> - u8 fandiv2;
> - u8 sio_reg_enable;
> -
> - struct regmap *regmap;
> - bool read_only;
> -};
> -
> struct sensor_device_template {
> struct device_attribute dev_attr;
> union {
> @@ -1406,21 +990,6 @@ struct sensor_template_group {
> int base;
> };
>
> -static inline umode_t nct6775_attr_mode(struct nct6775_data *data, struct attribute *attr)
> -{
> - return data->read_only ? (attr->mode & ~0222) : attr->mode;
> -}
> -
> -static int nct6775_add_attr_group(struct nct6775_data *data, const struct attribute_group *group)
> -{
> - /* Need to leave a NULL terminator at the end of data->groups */
> - if (data->num_groups == ARRAY_SIZE(data->groups) - 1)
> - return -ENOBUFS;
> -
> - data->groups[data->num_groups++] = group;
> - return 0;
> -}
> -
> static int nct6775_add_template_attr_group(struct device *dev, struct nct6775_data *data,
> const struct sensor_template_group *tg, int repeat)
> {
> @@ -1495,7 +1064,7 @@ static int nct6775_add_template_attr_group(struct device *dev, struct nct6775_da
> return nct6775_add_attr_group(data, group);
> }
>
> -static bool is_word_sized(struct nct6775_data *data, u16 reg)
> +bool nct6775_reg_is_word_sized(struct nct6775_data *data, u16 reg)
> {
> switch (data->kind) {
> case nct6106:
> @@ -1552,122 +1121,7 @@ static bool is_word_sized(struct nct6775_data *data, u16 reg)
> }
> return false;
> }
> -
> -static inline void nct6775_wmi_set_bank(struct nct6775_data *data, u16 reg)
> -{
> - u8 bank = reg >> 8;
> -
> - data->bank = bank;
> -}
> -
> -static int nct6775_wmi_reg_read(void *ctx, unsigned int reg, unsigned int *val)
> -{
> - struct nct6775_data *data = ctx;
> - int err, word_sized = is_word_sized(data, reg);
> - u8 tmp = 0;
> - u16 res;
> -
> - nct6775_wmi_set_bank(data, reg);
> -
> - err = nct6775_asuswmi_read(data->bank, reg & 0xff, &tmp);
> - if (err)
> - return err;
> -
> - res = tmp;
> - if (word_sized) {
> - err = nct6775_asuswmi_read(data->bank, (reg & 0xff) + 1, &tmp);
> - if (err)
> - return err;
> -
> - res = (res << 8) + tmp;
> - }
> - *val = res;
> - return 0;
> -}
> -
> -static inline int nct6775_read_value(struct nct6775_data *data, u16 reg, u16 *value)
> -{
> - unsigned int tmp;
> - int ret = regmap_read(data->regmap, reg, &tmp);
> -
> - if (!ret)
> - *value = tmp;
> - return ret;
> -}
> -
> -static int nct6775_wmi_reg_write(void *ctx, unsigned int reg, unsigned int value)
> -{
> - struct nct6775_data *data = ctx;
> - int res, word_sized = is_word_sized(data, reg);
> -
> - nct6775_wmi_set_bank(data, reg);
> -
> - if (word_sized) {
> - res = nct6775_asuswmi_write(data->bank, reg & 0xff, value >> 8);
> - if (res)
> - return res;
> -
> - res = nct6775_asuswmi_write(data->bank, (reg & 0xff) + 1, value);
> - } else {
> - res = nct6775_asuswmi_write(data->bank, reg & 0xff, value);
> - }
> -
> - return res;
> -}
> -
> -static inline int nct6775_write_value(struct nct6775_data *data, u16 reg, u16 value)
> -{
> - return regmap_write(data->regmap, reg, value);
> -}
> -
> -/*
> - * On older chips, only registers 0x50-0x5f are banked.
> - * On more recent chips, all registers are banked.
> - * Assume that is the case and set the bank number for each access.
> - * Cache the bank number so it only needs to be set if it changes.
> - */
> -static inline void nct6775_set_bank(struct nct6775_data *data, u16 reg)
> -{
> - u8 bank = reg >> 8;
> -
> - if (data->bank != bank) {
> - outb_p(NCT6775_REG_BANK, data->addr + ADDR_REG_OFFSET);
> - outb_p(bank, data->addr + DATA_REG_OFFSET);
> - data->bank = bank;
> - }
> -}
> -
> -static int nct6775_reg_read(void *ctx, unsigned int reg, unsigned int *val)
> -{
> - struct nct6775_data *data = ctx;
> - int word_sized = is_word_sized(data, reg);
> -
> - nct6775_set_bank(data, reg);
> - outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET);
> - *val = inb_p(data->addr + DATA_REG_OFFSET);
> - if (word_sized) {
> - outb_p((reg & 0xff) + 1,
> - data->addr + ADDR_REG_OFFSET);
> - *val = (*val << 8) + inb_p(data->addr + DATA_REG_OFFSET);
> - }
> - return 0;
> -}
> -
> -static int nct6775_reg_write(void *ctx, unsigned int reg, unsigned int value)
> -{
> - struct nct6775_data *data = ctx;
> - int word_sized = is_word_sized(data, reg);
> -
> - nct6775_set_bank(data, reg);
> - outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET);
> - if (word_sized) {
> - outb_p(value >> 8, data->addr + DATA_REG_OFFSET);
> - outb_p((reg & 0xff) + 1,
> - data->addr + ADDR_REG_OFFSET);
> - }
> - outb_p(value & 0xff, data->addr + DATA_REG_OFFSET);
> - return 0;
> -}
> +EXPORT_SYMBOL_GPL(nct6775_reg_is_word_sized);
>
> /* We left-align 8-bit temperature values to make the code simpler */
> static int nct6775_read_temp(struct nct6775_data *data, u16 reg, u16 *val)
> @@ -1678,19 +1132,12 @@ static int nct6775_read_temp(struct nct6775_data *data, u16 reg, u16 *val)
> if (err)
> return err;
>
> - if (!is_word_sized(data, reg))
> + if (!nct6775_reg_is_word_sized(data, reg))
> *val <<= 8;
>
> return 0;
> }
>
> -static int nct6775_write_temp(struct nct6775_data *data, u16 reg, u16 value)
> -{
> - if (!is_word_sized(data, reg))
> - value >>= 8;
> - return nct6775_write_value(data, reg, value);
> -}
> -
> /* This function assumes that the caller holds data->update_lock */
> static int nct6775_write_fan_div(struct nct6775_data *data, int nr)
> {
> @@ -2207,8 +1654,8 @@ store_in_reg(struct device *dev, struct device_attribute *attr, const char *buf,
> return err ? : count;
> }
>
> -static ssize_t
> -show_alarm(struct device *dev, struct device_attribute *attr, char *buf)
> +ssize_t
> +nct6775_show_alarm(struct device *dev, struct device_attribute *attr, char *buf)
> {
> struct nct6775_data *data = nct6775_update_device(dev);
> struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
> @@ -2221,6 +1668,7 @@ show_alarm(struct device *dev, struct device_attribute *attr, char *buf)
> return sprintf(buf, "%u\n",
> (unsigned int)((data->alarms >> nr) & 0x01));
> }
> +EXPORT_SYMBOL_GPL(nct6775_show_alarm);
>
> static int find_temp_source(struct nct6775_data *data, int index, int count)
> {
> @@ -2263,8 +1711,8 @@ show_temp_alarm(struct device *dev, struct device_attribute *attr, char *buf)
> return sprintf(buf, "%u\n", alarm);
> }
>
> -static ssize_t
> -show_beep(struct device *dev, struct device_attribute *attr, char *buf)
> +ssize_t
> +nct6775_show_beep(struct device *dev, struct device_attribute *attr, char *buf)
> {
> struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
> struct nct6775_data *data = nct6775_update_device(dev);
> @@ -2278,10 +1726,10 @@ show_beep(struct device *dev, struct device_attribute *attr, char *buf)
> return sprintf(buf, "%u\n",
> (unsigned int)((data->beeps >> nr) & 0x01));
> }
> +EXPORT_SYMBOL_GPL(nct6775_show_beep);
>
> -static ssize_t
> -store_beep(struct device *dev, struct device_attribute *attr, const char *buf,
> - size_t count)
> +ssize_t
> +nct6775_store_beep(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
> {
> struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
> struct nct6775_data *data = dev_get_drvdata(dev);
> @@ -2306,6 +1754,7 @@ store_beep(struct device *dev, struct device_attribute *attr, const char *buf,
> mutex_unlock(&data->update_lock);
> return err ? : count;
> }
> +EXPORT_SYMBOL_GPL(nct6775_store_beep);
>
> static ssize_t
> show_temp_beep(struct device *dev, struct device_attribute *attr, char *buf)
> @@ -2381,9 +1830,8 @@ static umode_t nct6775_in_is_visible(struct kobject *kobj,
> }
>
> SENSOR_TEMPLATE_2(in_input, "in%d_input", S_IRUGO, show_in_reg, NULL, 0, 0);
> -SENSOR_TEMPLATE(in_alarm, "in%d_alarm", S_IRUGO, show_alarm, NULL, 0);
> -SENSOR_TEMPLATE(in_beep, "in%d_beep", S_IWUSR | S_IRUGO, show_beep, store_beep,
> - 0);
> +SENSOR_TEMPLATE(in_alarm, "in%d_alarm", S_IRUGO, nct6775_show_alarm, NULL, 0);
> +SENSOR_TEMPLATE(in_beep, "in%d_beep", S_IWUSR | S_IRUGO, nct6775_show_beep, nct6775_store_beep, 0);
> SENSOR_TEMPLATE_2(in_min, "in%d_min", S_IWUSR | S_IRUGO, show_in_reg,
> store_in_reg, 0, 1);
> SENSOR_TEMPLATE_2(in_max, "in%d_max", S_IWUSR | S_IRUGO, show_in_reg,
> @@ -2617,10 +2065,10 @@ static umode_t nct6775_fan_is_visible(struct kobject *kobj,
> }
>
> SENSOR_TEMPLATE(fan_input, "fan%d_input", S_IRUGO, show_fan, NULL, 0);
> -SENSOR_TEMPLATE(fan_alarm, "fan%d_alarm", S_IRUGO, show_alarm, NULL,
> +SENSOR_TEMPLATE(fan_alarm, "fan%d_alarm", S_IRUGO, nct6775_show_alarm, NULL,
> FAN_ALARM_BASE);
> -SENSOR_TEMPLATE(fan_beep, "fan%d_beep", S_IWUSR | S_IRUGO, show_beep,
> - store_beep, FAN_ALARM_BASE);
> +SENSOR_TEMPLATE(fan_beep, "fan%d_beep", S_IWUSR | S_IRUGO, nct6775_show_beep,
> + nct6775_store_beep, FAN_ALARM_BASE);
> SENSOR_TEMPLATE(fan_pulses, "fan%d_pulses", S_IWUSR | S_IRUGO, show_fan_pulses,
> store_fan_pulses, 0);
> SENSOR_TEMPLATE(fan_min, "fan%d_min", S_IWUSR | S_IRUGO, show_fan_min,
> @@ -3884,113 +3332,6 @@ static const struct sensor_template_group nct6775_pwm_template_group = {
> .base = 1,
> };
>
> -static ssize_t
> -cpu0_vid_show(struct device *dev, struct device_attribute *attr, char *buf)
> -{
> - struct nct6775_data *data = dev_get_drvdata(dev);
> -
> - return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
> -}
> -
> -static DEVICE_ATTR_RO(cpu0_vid);
> -
> -/* Case open detection */
> -
> -static ssize_t
> -clear_caseopen(struct device *dev, struct device_attribute *attr,
> - const char *buf, size_t count)
> -{
> - struct nct6775_data *data = dev_get_drvdata(dev);
> - struct nct6775_sio_data *sio_data = data->sio_data;
> - int nr = to_sensor_dev_attr(attr)->index - INTRUSION_ALARM_BASE;
> - unsigned long val;
> - u8 reg;
> - int ret;
> -
> - if (kstrtoul(buf, 10, &val) || val != 0)
> - return -EINVAL;
> -
> - mutex_lock(&data->update_lock);
> -
> - /*
> - * Use CR registers to clear caseopen status.
> - * The CR registers are the same for all chips, and not all chips
> - * support clearing the caseopen status through "regular" registers.
> - */
> - ret = sio_data->sio_enter(sio_data);
> - if (ret) {
> - count = ret;
> - goto error;
> - }
> -
> - sio_data->sio_select(sio_data, NCT6775_LD_ACPI);
> - reg = sio_data->sio_inb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr]);
> - reg |= NCT6775_CR_CASEOPEN_CLR_MASK[nr];
> - sio_data->sio_outb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr], reg);
> - reg &= ~NCT6775_CR_CASEOPEN_CLR_MASK[nr];
> - sio_data->sio_outb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr], reg);
> - sio_data->sio_exit(sio_data);
> -
> - data->valid = false; /* Force cache refresh */
> -error:
> - mutex_unlock(&data->update_lock);
> - return count;
> -}
> -
> -static SENSOR_DEVICE_ATTR(intrusion0_alarm, S_IWUSR | S_IRUGO, show_alarm,
> - clear_caseopen, INTRUSION_ALARM_BASE);
> -static SENSOR_DEVICE_ATTR(intrusion1_alarm, S_IWUSR | S_IRUGO, show_alarm,
> - clear_caseopen, INTRUSION_ALARM_BASE + 1);
> -static SENSOR_DEVICE_ATTR(intrusion0_beep, S_IWUSR | S_IRUGO, show_beep,
> - store_beep, INTRUSION_ALARM_BASE);
> -static SENSOR_DEVICE_ATTR(intrusion1_beep, S_IWUSR | S_IRUGO, show_beep,
> - store_beep, INTRUSION_ALARM_BASE + 1);
> -static SENSOR_DEVICE_ATTR(beep_enable, S_IWUSR | S_IRUGO, show_beep,
> - store_beep, BEEP_ENABLE_BASE);
> -
> -static umode_t nct6775_other_is_visible(struct kobject *kobj,
> - struct attribute *attr, int index)
> -{
> - struct device *dev = kobj_to_dev(kobj);
> - struct nct6775_data *data = dev_get_drvdata(dev);
> -
> - if (index == 0 && !data->have_vid)
> - return 0;
> -
> - if (index == 1 || index == 2) {
> - if (data->ALARM_BITS[INTRUSION_ALARM_BASE + index - 1] < 0)
> - return 0;
> - }
> -
> - if (index == 3 || index == 4) {
> - if (data->BEEP_BITS[INTRUSION_ALARM_BASE + index - 3] < 0)
> - return 0;
> - }
> -
> - return nct6775_attr_mode(data, attr);
> -}
> -
> -/*
> - * nct6775_other_is_visible uses the index into the following array
> - * to determine if attributes should be created or not.
> - * Any change in order or content must be matched.
> - */
> -static struct attribute *nct6775_attributes_other[] = {
> - &dev_attr_cpu0_vid.attr, /* 0 */
> - &sensor_dev_attr_intrusion0_alarm.dev_attr.attr, /* 1 */
> - &sensor_dev_attr_intrusion1_alarm.dev_attr.attr, /* 2 */
> - &sensor_dev_attr_intrusion0_beep.dev_attr.attr, /* 3 */
> - &sensor_dev_attr_intrusion1_beep.dev_attr.attr, /* 4 */
> - &sensor_dev_attr_beep_enable.dev_attr.attr, /* 5 */
> -
> - NULL
> -};
> -
> -static const struct attribute_group nct6775_group_other = {
> - .attrs = nct6775_attributes_other,
> - .is_visible = nct6775_other_is_visible,
> -};
> -
> static inline int nct6775_init_device(struct nct6775_data *data)
> {
> int i, err;
> @@ -4051,227 +3392,6 @@ static inline int nct6775_init_device(struct nct6775_data *data)
> return 0;
> }
>
> -static void
> -nct6775_check_fan_inputs(struct nct6775_data *data, struct nct6775_sio_data *sio_data)
> -{
> - bool fan3pin = false, fan4pin = false, fan4min = false;
> - bool fan5pin = false, fan6pin = false, fan7pin = false;
> - bool pwm3pin = false, pwm4pin = false, pwm5pin = false;
> - bool pwm6pin = false, pwm7pin = false;
> -
> - /* Store SIO_REG_ENABLE for use during resume */
> - sio_data->sio_select(sio_data, NCT6775_LD_HWM);
> - data->sio_reg_enable = sio_data->sio_inb(sio_data, SIO_REG_ENABLE);
> -
> - /* fan4 and fan5 share some pins with the GPIO and serial flash */
> - if (data->kind == nct6775) {
> - int cr2c = sio_data->sio_inb(sio_data, 0x2c);
> -
> - fan3pin = cr2c & BIT(6);
> - pwm3pin = cr2c & BIT(7);
> -
> - /* On NCT6775, fan4 shares pins with the fdc interface */
> - fan4pin = !(sio_data->sio_inb(sio_data, 0x2A) & 0x80);
> - } else if (data->kind == nct6776) {
> - bool gpok = sio_data->sio_inb(sio_data, 0x27) & 0x80;
> - const char *board_vendor, *board_name;
> -
> - board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
> - board_name = dmi_get_system_info(DMI_BOARD_NAME);
> -
> - if (board_name && board_vendor &&
> - !strcmp(board_vendor, "ASRock")) {
> - /*
> - * Auxiliary fan monitoring is not enabled on ASRock
> - * Z77 Pro4-M if booted in UEFI Ultra-FastBoot mode.
> - * Observed with BIOS version 2.00.
> - */
> - if (!strcmp(board_name, "Z77 Pro4-M")) {
> - if ((data->sio_reg_enable & 0xe0) != 0xe0) {
> - data->sio_reg_enable |= 0xe0;
> - sio_data->sio_outb(sio_data, SIO_REG_ENABLE,
> - data->sio_reg_enable);
> - }
> - }
> - }
> -
> - if (data->sio_reg_enable & 0x80)
> - fan3pin = gpok;
> - else
> - fan3pin = !(sio_data->sio_inb(sio_data, 0x24) & 0x40);
> -
> - if (data->sio_reg_enable & 0x40)
> - fan4pin = gpok;
> - else
> - fan4pin = sio_data->sio_inb(sio_data, 0x1C) & 0x01;
> -
> - if (data->sio_reg_enable & 0x20)
> - fan5pin = gpok;
> - else
> - fan5pin = sio_data->sio_inb(sio_data, 0x1C) & 0x02;
> -
> - fan4min = fan4pin;
> - pwm3pin = fan3pin;
> - } else if (data->kind == nct6106) {
> - int cr24 = sio_data->sio_inb(sio_data, 0x24);
> -
> - fan3pin = !(cr24 & 0x80);
> - pwm3pin = cr24 & 0x08;
> - } else if (data->kind == nct6116) {
> - int cr1a = sio_data->sio_inb(sio_data, 0x1a);
> - int cr1b = sio_data->sio_inb(sio_data, 0x1b);
> - int cr24 = sio_data->sio_inb(sio_data, 0x24);
> - int cr2a = sio_data->sio_inb(sio_data, 0x2a);
> - int cr2b = sio_data->sio_inb(sio_data, 0x2b);
> - int cr2f = sio_data->sio_inb(sio_data, 0x2f);
> -
> - fan3pin = !(cr2b & 0x10);
> - fan4pin = (cr2b & 0x80) || // pin 1(2)
> - (!(cr2f & 0x10) && (cr1a & 0x04)); // pin 65(66)
> - fan5pin = (cr2b & 0x80) || // pin 126(127)
> - (!(cr1b & 0x03) && (cr2a & 0x02)); // pin 94(96)
> -
> - pwm3pin = fan3pin && (cr24 & 0x08);
> - pwm4pin = fan4pin;
> - pwm5pin = fan5pin;
> - } else {
> - /*
> - * NCT6779D, NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D,
> - * NCT6797D, NCT6798D
> - */
> - int cr1a = sio_data->sio_inb(sio_data, 0x1a);
> - int cr1b = sio_data->sio_inb(sio_data, 0x1b);
> - int cr1c = sio_data->sio_inb(sio_data, 0x1c);
> - int cr1d = sio_data->sio_inb(sio_data, 0x1d);
> - int cr2a = sio_data->sio_inb(sio_data, 0x2a);
> - int cr2b = sio_data->sio_inb(sio_data, 0x2b);
> - int cr2d = sio_data->sio_inb(sio_data, 0x2d);
> - int cr2f = sio_data->sio_inb(sio_data, 0x2f);
> - bool dsw_en = cr2f & BIT(3);
> - bool ddr4_en = cr2f & BIT(4);
> - int cre0;
> - int creb;
> - int cred;
> -
> - sio_data->sio_select(sio_data, NCT6775_LD_12);
> - cre0 = sio_data->sio_inb(sio_data, 0xe0);
> - creb = sio_data->sio_inb(sio_data, 0xeb);
> - cred = sio_data->sio_inb(sio_data, 0xed);
> -
> - fan3pin = !(cr1c & BIT(5));
> - fan4pin = !(cr1c & BIT(6));
> - fan5pin = !(cr1c & BIT(7));
> -
> - pwm3pin = !(cr1c & BIT(0));
> - pwm4pin = !(cr1c & BIT(1));
> - pwm5pin = !(cr1c & BIT(2));
> -
> - switch (data->kind) {
> - case nct6791:
> - fan6pin = cr2d & BIT(1);
> - pwm6pin = cr2d & BIT(0);
> - break;
> - case nct6792:
> - fan6pin = !dsw_en && (cr2d & BIT(1));
> - pwm6pin = !dsw_en && (cr2d & BIT(0));
> - break;
> - case nct6793:
> - fan5pin |= cr1b & BIT(5);
> - fan5pin |= creb & BIT(5);
> -
> - fan6pin = !dsw_en && (cr2d & BIT(1));
> - fan6pin |= creb & BIT(3);
> -
> - pwm5pin |= cr2d & BIT(7);
> - pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
> -
> - pwm6pin = !dsw_en && (cr2d & BIT(0));
> - pwm6pin |= creb & BIT(2);
> - break;
> - case nct6795:
> - fan5pin |= cr1b & BIT(5);
> - fan5pin |= creb & BIT(5);
> -
> - fan6pin = (cr2a & BIT(4)) &&
> - (!dsw_en || (cred & BIT(4)));
> - fan6pin |= creb & BIT(3);
> -
> - pwm5pin |= cr2d & BIT(7);
> - pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
> -
> - pwm6pin = (cr2a & BIT(3)) && (cred & BIT(2));
> - pwm6pin |= creb & BIT(2);
> - break;
> - case nct6796:
> - fan5pin |= cr1b & BIT(5);
> - fan5pin |= (cre0 & BIT(3)) && !(cr1b & BIT(0));
> - fan5pin |= creb & BIT(5);
> -
> - fan6pin = (cr2a & BIT(4)) &&
> - (!dsw_en || (cred & BIT(4)));
> - fan6pin |= creb & BIT(3);
> -
> - fan7pin = !(cr2b & BIT(2));
> -
> - pwm5pin |= cr2d & BIT(7);
> - pwm5pin |= (cre0 & BIT(4)) && !(cr1b & BIT(0));
> - pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
> -
> - pwm6pin = (cr2a & BIT(3)) && (cred & BIT(2));
> - pwm6pin |= creb & BIT(2);
> -
> - pwm7pin = !(cr1d & (BIT(2) | BIT(3)));
> - break;
> - case nct6797:
> - fan5pin |= !ddr4_en && (cr1b & BIT(5));
> - fan5pin |= creb & BIT(5);
> -
> - fan6pin = cr2a & BIT(4);
> - fan6pin |= creb & BIT(3);
> -
> - fan7pin = cr1a & BIT(1);
> -
> - pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
> - pwm5pin |= !ddr4_en && (cr2d & BIT(7));
> -
> - pwm6pin = creb & BIT(2);
> - pwm6pin |= cred & BIT(2);
> -
> - pwm7pin = cr1d & BIT(4);
> - break;
> - case nct6798:
> - fan6pin = !(cr1b & BIT(0)) && (cre0 & BIT(3));
> - fan6pin |= cr2a & BIT(4);
> - fan6pin |= creb & BIT(5);
> -
> - fan7pin = cr1b & BIT(5);
> - fan7pin |= !(cr2b & BIT(2));
> - fan7pin |= creb & BIT(3);
> -
> - pwm6pin = !(cr1b & BIT(0)) && (cre0 & BIT(4));
> - pwm6pin |= !(cred & BIT(2)) && (cr2a & BIT(3));
> - pwm6pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
> -
> - pwm7pin = !(cr1d & (BIT(2) | BIT(3)));
> - pwm7pin |= cr2d & BIT(7);
> - pwm7pin |= creb & BIT(2);
> - break;
> - default: /* NCT6779D */
> - break;
> - }
> -
> - fan4min = fan4pin;
> - }
> -
> - /* fan 1 and 2 (0x03) are always present */
> - data->has_fan = 0x03 | (fan3pin << 2) | (fan4pin << 3) |
> - (fan5pin << 4) | (fan6pin << 5) | (fan7pin << 6);
> - data->has_fan_min = 0x03 | (fan3pin << 2) | (fan4min << 3) |
> - (fan5pin << 4) | (fan6pin << 5) | (fan7pin << 6);
> - data->has_pwm = 0x03 | (pwm3pin << 2) | (pwm4pin << 3) |
> - (pwm5pin << 4) | (pwm6pin << 5) | (pwm7pin << 6);
> -}
> -
> static int add_temp_sensors(struct nct6775_data *data, const u16 *regp,
> int *available, int *mask)
> {
> @@ -4303,26 +3423,9 @@ static int add_temp_sensors(struct nct6775_data *data, const u16 *regp,
> return 0;
> }
>
> -static const struct regmap_config nct6775_regmap_config = {
> - .reg_bits = 16,
> - .val_bits = 16,
> - .reg_read = nct6775_reg_read,
> - .reg_write = nct6775_reg_write,
> -};
> -
> -static const struct regmap_config nct6775_wmi_regmap_config = {
> - .reg_bits = 16,
> - .val_bits = 16,
> - .reg_read = nct6775_wmi_reg_read,
> - .reg_write = nct6775_wmi_reg_write,
> -};
> -
> -static int nct6775_probe(struct platform_device *pdev)
> +int nct6775_probe(struct device *dev, struct nct6775_data *data,
> + const struct regmap_config *regmapcfg)
> {
> - struct device *dev = &pdev->dev;
> - struct nct6775_sio_data *sio_data = dev_get_platdata(dev);
> - struct nct6775_data *data;
> - struct resource *res;
> int i, s, err = 0;
> int mask, available;
> u16 src;
> @@ -4330,32 +3433,8 @@ static int nct6775_probe(struct platform_device *pdev)
> const u16 *reg_temp_mon, *reg_temp_alternate, *reg_temp_crit;
> const u16 *reg_temp_crit_l = NULL, *reg_temp_crit_h = NULL;
> int num_reg_temp, num_reg_temp_mon, num_reg_tsi_temp;
> - u8 cr2a;
> struct device *hwmon_dev;
> struct sensor_template_group tsi_temp_tg;
> - const struct regmap_config *regmapcfg;
> -
> - if (sio_data->access == access_direct) {
> - res = platform_get_resource(pdev, IORESOURCE_IO, 0);
> - if (!devm_request_region(&pdev->dev, res->start, IOREGION_LENGTH,
> - DRVNAME))
> - return -EBUSY;
> - }
> -
> - data = devm_kzalloc(&pdev->dev, sizeof(struct nct6775_data),
> - GFP_KERNEL);
> - if (!data)
> - return -ENOMEM;
> -
> - data->kind = sio_data->kind;
> - data->sio_data = sio_data;
> -
> - if (sio_data->access == access_direct) {
> - data->addr = res->start;
> - regmapcfg = &nct6775_regmap_config;
> - } else {
> - regmapcfg = &nct6775_wmi_regmap_config;
> - }
>
> data->regmap = devm_regmap_init(dev, NULL, data, regmapcfg);
> if (IS_ERR(data->regmap))
> @@ -4364,7 +3443,6 @@ static int nct6775_probe(struct platform_device *pdev)
> mutex_init(&data->update_lock);
> data->name = nct6775_device_names[data->kind];
> data->bank = 0xff; /* Force initial bank selection */
> - platform_set_drvdata(pdev, data);
>
> switch (data->kind) {
> case nct6106:
> @@ -5099,79 +4177,12 @@ static int nct6775_probe(struct platform_device *pdev)
> if (err)
> return err;
>
> - err = sio_data->sio_enter(sio_data);
> - if (err)
> - return err;
> -
> - cr2a = sio_data->sio_inb(sio_data, 0x2a);
> - switch (data->kind) {
> - case nct6775:
> - data->have_vid = (cr2a & 0x40);
> - break;
> - case nct6776:
> - data->have_vid = (cr2a & 0x60) == 0x40;
> - break;
> - case nct6106:
> - case nct6116:
> - case nct6779:
> - case nct6791:
> - case nct6792:
> - case nct6793:
> - case nct6795:
> - case nct6796:
> - case nct6797:
> - case nct6798:
> - break;
> - }
> -
> - /*
> - * Read VID value
> - * We can get the VID input values directly at logical device D 0xe3.
> - */
> - if (data->have_vid) {
> - sio_data->sio_select(sio_data, NCT6775_LD_VID);
> - data->vid = sio_data->sio_inb(sio_data, 0xe3);
> - data->vrm = vid_which_vrm();
> - }
> -
> - if (fan_debounce) {
> - u8 tmp;
> -
> - sio_data->sio_select(sio_data, NCT6775_LD_HWM);
> - tmp = sio_data->sio_inb(sio_data,
> - NCT6775_REG_CR_FAN_DEBOUNCE);
> - switch (data->kind) {
> - case nct6106:
> - case nct6116:
> - tmp |= 0xe0;
> - break;
> - case nct6775:
> - tmp |= 0x1e;
> - break;
> - case nct6776:
> - case nct6779:
> - tmp |= 0x3e;
> - break;
> - case nct6791:
> - case nct6792:
> - case nct6793:
> - case nct6795:
> - case nct6796:
> - case nct6797:
> - case nct6798:
> - tmp |= 0x7e;
> - break;
> - }
> - sio_data->sio_outb(sio_data, NCT6775_REG_CR_FAN_DEBOUNCE,
> - tmp);
> - dev_info(&pdev->dev, "Enabled fan debounce for chip %s\n",
> - data->name);
> + if (data->driver_init) {
> + err = data->driver_init(data);
> + if (err)
> + return err;
> }
>
> - nct6775_check_fan_inputs(data, sio_data);
> -
> - sio_data->sio_exit(sio_data);
> -
> /* Read fan clock dividers immediately */
> err = nct6775_init_fan_common(dev, data);
> if (err)
> @@ -5208,430 +4219,12 @@ static int nct6775_probe(struct platform_device *pdev)
> return err;
> }
>
> - err = nct6775_add_attr_group(data, &nct6775_group_other);
> - if (err)
> - return err;
> -
> hwmon_dev = devm_hwmon_device_register_with_groups(dev, data->name,
> data, data->groups);
> return PTR_ERR_OR_ZERO(hwmon_dev);
> }
> -
> -static void nct6791_enable_io_mapping(struct nct6775_sio_data *sio_data)
> -{
> - int val;
> -
> - val = sio_data->sio_inb(sio_data, NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE);
> - if (val & 0x10) {
> - pr_info("Enabling hardware monitor logical device mappings.\n");
> - sio_data->sio_outb(sio_data, NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE,
> - val & ~0x10);
> - }
> -}
> -
> -static int __maybe_unused nct6775_suspend(struct device *dev)
> -{
> - int err;
> - u16 tmp;
> - struct nct6775_data *data = nct6775_update_device(dev);
> -
> - if (IS_ERR(data))
> - return PTR_ERR(data);
> -
> - mutex_lock(&data->update_lock);
> - err = nct6775_read_value(data, data->REG_VBAT, &tmp);
> - if (err)
> - goto out;
> - data->vbat = tmp;
> - if (data->kind == nct6775) {
> - err = nct6775_read_value(data, NCT6775_REG_FANDIV1, &tmp);
> - if (err)
> - goto out;
> - data->fandiv1 = tmp;
> -
> - err = nct6775_read_value(data, NCT6775_REG_FANDIV2, &tmp);
> - if (err)
> - goto out;
> - data->fandiv2 = tmp;
> - }
> -out:
> - mutex_unlock(&data->update_lock);
> -
> - return err;
> -}
> -
> -static int __maybe_unused nct6775_resume(struct device *dev)
> -{
> - struct nct6775_data *data = dev_get_drvdata(dev);
> - struct nct6775_sio_data *sio_data = dev_get_platdata(dev);
> - int i, j, err = 0;
> - u8 reg;
> -
> - mutex_lock(&data->update_lock);
> - data->bank = 0xff; /* Force initial bank selection */
> -
> - err = sio_data->sio_enter(sio_data);
> - if (err)
> - goto abort;
> -
> - sio_data->sio_select(sio_data, NCT6775_LD_HWM);
> - reg = sio_data->sio_inb(sio_data, SIO_REG_ENABLE);
> - if (reg != data->sio_reg_enable)
> - sio_data->sio_outb(sio_data, SIO_REG_ENABLE, data->sio_reg_enable);
> -
> - if (data->kind == nct6791 || data->kind == nct6792 ||
> - data->kind == nct6793 || data->kind == nct6795 ||
> - data->kind == nct6796 || data->kind == nct6797 ||
> - data->kind == nct6798)
> - nct6791_enable_io_mapping(sio_data);
> -
> - sio_data->sio_exit(sio_data);
> -
> - /* Restore limits */
> - for (i = 0; i < data->in_num; i++) {
> - if (!(data->have_in & BIT(i)))
> - continue;
> -
> - err = nct6775_write_value(data, data->REG_IN_MINMAX[0][i], data->in[i][1]);
> - if (err)
> - goto abort;
> - err = nct6775_write_value(data, data->REG_IN_MINMAX[1][i], data->in[i][2]);
> - if (err)
> - goto abort;
> - }
> -
> - for (i = 0; i < ARRAY_SIZE(data->fan_min); i++) {
> - if (!(data->has_fan_min & BIT(i)))
> - continue;
> -
> - err = nct6775_write_value(data, data->REG_FAN_MIN[i], data->fan_min[i]);
> - if (err)
> - goto abort;
> - }
> -
> - for (i = 0; i < NUM_TEMP; i++) {
> - if (!(data->have_temp & BIT(i)))
> - continue;
> -
> - for (j = 1; j < ARRAY_SIZE(data->reg_temp); j++)
> - if (data->reg_temp[j][i]) {
> - err = nct6775_write_temp(data, data->reg_temp[j][i],
> - data->temp[j][i]);
> - if (err)
> - goto abort;
> - }
> - }
> -
> - /* Restore other settings */
> - err = nct6775_write_value(data, data->REG_VBAT, data->vbat);
> - if (err)
> - goto abort;
> - if (data->kind == nct6775) {
> - err = nct6775_write_value(data, NCT6775_REG_FANDIV1, data->fandiv1);
> - if (err)
> - goto abort;
> - err = nct6775_write_value(data, NCT6775_REG_FANDIV2, data->fandiv2);
> - }
> -
> -abort:
> - /* Force re-reading all values */
> - data->valid = false;
> - mutex_unlock(&data->update_lock);
> -
> - return err;
> -}
> -
> -static SIMPLE_DEV_PM_OPS(nct6775_dev_pm_ops, nct6775_suspend, nct6775_resume);
> -
> -static struct platform_driver nct6775_driver = {
> - .driver = {
> - .name = DRVNAME,
> - .pm = &nct6775_dev_pm_ops,
> - },
> - .probe = nct6775_probe,
> -};
> -
> -/* nct6775_find() looks for a '627 in the Super-I/O config space */
> -static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data)
> -{
> - u16 val;
> - int err;
> - int addr;
> -
> - sio_data->access = access_direct;
> - sio_data->sioreg = sioaddr;
> -
> - err = sio_data->sio_enter(sio_data);
> - if (err)
> - return err;
> -
> - val = (sio_data->sio_inb(sio_data, SIO_REG_DEVID) << 8) |
> - sio_data->sio_inb(sio_data, SIO_REG_DEVID + 1);
> - if (force_id && val != 0xffff)
> - val = force_id;
> -
> - switch (val & SIO_ID_MASK) {
> - case SIO_NCT6106_ID:
> - sio_data->kind = nct6106;
> - break;
> - case SIO_NCT6116_ID:
> - sio_data->kind = nct6116;
> - break;
> - case SIO_NCT6775_ID:
> - sio_data->kind = nct6775;
> - break;
> - case SIO_NCT6776_ID:
> - sio_data->kind = nct6776;
> - break;
> - case SIO_NCT6779_ID:
> - sio_data->kind = nct6779;
> - break;
> - case SIO_NCT6791_ID:
> - sio_data->kind = nct6791;
> - break;
> - case SIO_NCT6792_ID:
> - sio_data->kind = nct6792;
> - break;
> - case SIO_NCT6793_ID:
> - sio_data->kind = nct6793;
> - break;
> - case SIO_NCT6795_ID:
> - sio_data->kind = nct6795;
> - break;
> - case SIO_NCT6796_ID:
> - sio_data->kind = nct6796;
> - break;
> - case SIO_NCT6797_ID:
> - sio_data->kind = nct6797;
> - break;
> - case SIO_NCT6798_ID:
> - sio_data->kind = nct6798;
> - break;
> - default:
> - if (val != 0xffff)
> - pr_debug("unsupported chip ID: 0x%04x\n", val);
> - sio_data->sio_exit(sio_data);
> - return -ENODEV;
> - }
> -
> - /* We have a known chip, find the HWM I/O address */
> - sio_data->sio_select(sio_data, NCT6775_LD_HWM);
> - val = (sio_data->sio_inb(sio_data, SIO_REG_ADDR) << 8)
> - | sio_data->sio_inb(sio_data, SIO_REG_ADDR + 1);
> - addr = val & IOREGION_ALIGNMENT;
> - if (addr == 0) {
> - pr_err("Refusing to enable a Super-I/O device with a base I/O port 0\n");
> - sio_data->sio_exit(sio_data);
> - return -ENODEV;
> - }
> -
> - /* Activate logical device if needed */
> - val = sio_data->sio_inb(sio_data, SIO_REG_ENABLE);
> - if (!(val & 0x01)) {
> - pr_warn("Forcibly enabling Super-I/O. Sensor is probably unusable.\n");
> - sio_data->sio_outb(sio_data, SIO_REG_ENABLE, val | 0x01);
> - }
> -
> - if (sio_data->kind == nct6791 || sio_data->kind == nct6792 ||
> - sio_data->kind == nct6793 || sio_data->kind == nct6795 ||
> - sio_data->kind == nct6796 || sio_data->kind == nct6797 ||
> - sio_data->kind == nct6798)
> - nct6791_enable_io_mapping(sio_data);
> -
> - sio_data->sio_exit(sio_data);
> - pr_info("Found %s or compatible chip at %#x:%#x\n",
> - nct6775_sio_names[sio_data->kind], sioaddr, addr);
> -
> - return addr;
> -}
> -
> -/*
> - * when Super-I/O functions move to a separate file, the Super-I/O
> - * bus will manage the lifetime of the device and this module will only keep
> - * track of the nct6775 driver. But since we use platform_device_alloc(), we
> - * must keep track of the device
> - */
> -static struct platform_device *pdev[2];
> -
> -static const char * const asus_wmi_boards[] = {
> - "ProArt X570-CREATOR WIFI",
> - "Pro B550M-C",
> - "Pro WS X570-ACE",
> - "PRIME B360-PLUS",
> - "PRIME B460-PLUS",
> - "PRIME B550-PLUS",
> - "PRIME B550M-A",
> - "PRIME B550M-A (WI-FI)",
> - "PRIME X570-P",
> - "PRIME X570-PRO",
> - "ROG CROSSHAIR VIII DARK HERO",
> - "ROG CROSSHAIR VIII FORMULA",
> - "ROG CROSSHAIR VIII HERO",
> - "ROG CROSSHAIR VIII IMPACT",
> - "ROG STRIX B550-A GAMING",
> - "ROG STRIX B550-E GAMING",
> - "ROG STRIX B550-F GAMING",
> - "ROG STRIX B550-F GAMING (WI-FI)",
> - "ROG STRIX B550-F GAMING WIFI II",
> - "ROG STRIX B550-I GAMING",
> - "ROG STRIX B550-XE GAMING (WI-FI)",
> - "ROG STRIX X570-E GAMING",
> - "ROG STRIX X570-F GAMING",
> - "ROG STRIX X570-I GAMING",
> - "ROG STRIX Z390-E GAMING",
> - "ROG STRIX Z390-F GAMING",
> - "ROG STRIX Z390-H GAMING",
> - "ROG STRIX Z390-I GAMING",
> - "ROG STRIX Z490-A GAMING",
> - "ROG STRIX Z490-E GAMING",
> - "ROG STRIX Z490-F GAMING",
> - "ROG STRIX Z490-G GAMING",
> - "ROG STRIX Z490-G GAMING (WI-FI)",
> - "ROG STRIX Z490-H GAMING",
> - "ROG STRIX Z490-I GAMING",
> - "TUF GAMING B550M-PLUS",
> - "TUF GAMING B550M-PLUS (WI-FI)",
> - "TUF GAMING B550-PLUS",
> - "TUF GAMING B550-PRO",
> - "TUF GAMING X570-PLUS",
> - "TUF GAMING X570-PLUS (WI-FI)",
> - "TUF GAMING X570-PRO (WI-FI)",
> - "TUF GAMING Z490-PLUS",
> - "TUF GAMING Z490-PLUS (WI-FI)",
> -};
> -
> -static int __init sensors_nct6775_init(void)
> -{
> - int i, err;
> - bool found = false;
> - int address;
> - struct resource res;
> - struct nct6775_sio_data sio_data;
> - int sioaddr[2] = { 0x2e, 0x4e };
> - enum sensor_access access = access_direct;
> - const char *board_vendor, *board_name;
> - u8 tmp;
> -
> - err = platform_driver_register(&nct6775_driver);
> - if (err)
> - return err;
> -
> - board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
> - board_name = dmi_get_system_info(DMI_BOARD_NAME);
> -
> - if (board_name && board_vendor &&
> - !strcmp(board_vendor, "ASUSTeK COMPUTER INC.")) {
> - err = match_string(asus_wmi_boards, ARRAY_SIZE(asus_wmi_boards),
> - board_name);
> - if (err >= 0) {
> - /* if reading chip id via WMI succeeds, use WMI */
> - if (!nct6775_asuswmi_read(0, NCT6775_PORT_CHIPID, &tmp) && tmp) {
> - pr_info("Using Asus WMI to access %#x chip.\n", tmp);
> - access = access_asuswmi;
> - } else {
> - pr_err("Can't read ChipID by Asus WMI.\n");
> - }
> - }
> - }
> -
> - /*
> - * initialize sio_data->kind and sio_data->sioreg.
> - *
> - * when Super-I/O functions move to a separate file, the Super-I/O
> - * driver will probe 0x2e and 0x4e and auto-detect the presence of a
> - * nct6775 hardware monitor, and call probe()
> - */
> - for (i = 0; i < ARRAY_SIZE(pdev); i++) {
> - sio_data.sio_outb = superio_outb;
> - sio_data.sio_inb = superio_inb;
> - sio_data.sio_select = superio_select;
> - sio_data.sio_enter = superio_enter;
> - sio_data.sio_exit = superio_exit;
> -
> - address = nct6775_find(sioaddr[i], &sio_data);
> - if (address <= 0)
> - continue;
> -
> - found = true;
> -
> - sio_data.access = access;
> -
> - if (access == access_asuswmi) {
> - sio_data.sio_outb = superio_wmi_outb;
> - sio_data.sio_inb = superio_wmi_inb;
> - sio_data.sio_select = superio_wmi_select;
> - sio_data.sio_enter = superio_wmi_enter;
> - sio_data.sio_exit = superio_wmi_exit;
> - }
> -
> - pdev[i] = platform_device_alloc(DRVNAME, address);
> - if (!pdev[i]) {
> - err = -ENOMEM;
> - goto exit_device_unregister;
> - }
> -
> - err = platform_device_add_data(pdev[i], &sio_data,
> - sizeof(struct nct6775_sio_data));
> - if (err)
> - goto exit_device_put;
> -
> - if (sio_data.access == access_direct) {
> - memset(&res, 0, sizeof(res));
> - res.name = DRVNAME;
> - res.start = address + IOREGION_OFFSET;
> - res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1;
> - res.flags = IORESOURCE_IO;
> -
> - err = acpi_check_resource_conflict(&res);
> - if (err) {
> - platform_device_put(pdev[i]);
> - pdev[i] = NULL;
> - continue;
> - }
> -
> - err = platform_device_add_resources(pdev[i], &res, 1);
> - if (err)
> - goto exit_device_put;
> - }
> -
> - /* platform_device_add calls probe() */
> - err = platform_device_add(pdev[i]);
> - if (err)
> - goto exit_device_put;
> - }
> - if (!found) {
> - err = -ENODEV;
> - goto exit_unregister;
> - }
> -
> - return 0;
> -
> -exit_device_put:
> - platform_device_put(pdev[i]);
> -exit_device_unregister:
> - while (--i >= 0) {
> - if (pdev[i])
> - platform_device_unregister(pdev[i]);
> - }
> -exit_unregister:
> - platform_driver_unregister(&nct6775_driver);
> - return err;
> -}
> -
> -static void __exit sensors_nct6775_exit(void)
> -{
> - int i;
> -
> - for (i = 0; i < ARRAY_SIZE(pdev); i++) {
> - if (pdev[i])
> - platform_device_unregister(pdev[i]);
> - }
> - platform_driver_unregister(&nct6775_driver);
> -}
> +EXPORT_SYMBOL_GPL(nct6775_probe);
>
> MODULE_AUTHOR("Guenter Roeck <linux@xxxxxxxxxxxx>");
> -MODULE_DESCRIPTION("Driver for NCT6775F and compatible chips");
> +MODULE_DESCRIPTION("Core driver for NCT6775F and compatible chips");
> MODULE_LICENSE("GPL");
> -
> -module_init(sensors_nct6775_init);
> -module_exit(sensors_nct6775_exit);
> diff --git a/drivers/hwmon/nct6775-platform.c b/drivers/hwmon/nct6775-platform.c
> new file mode 100644
> index 000000000000..15d6ad376007
> --- /dev/null
> +++ b/drivers/hwmon/nct6775-platform.c
> @@ -0,0 +1,1232 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * nct6775-platform - Platform driver for the hardware monitoring
> + * functionality of Nuvoton NCT677x Super-I/O chips
> + *
> + * Copyright (C) 2012 Guenter Roeck <linux@xxxxxxxxxxxx>
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> +#include <linux/acpi.h>
> +#include <linux/dmi.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/hwmon-vid.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/wmi.h>
> +
> +#include "nct6775.h"
> +
> +enum sensor_access { access_direct, access_asuswmi };
> +
> +static const char * const nct6775_sio_names[] __initconst = {
> + "NCT6106D",
> + "NCT6116D",
> + "NCT6775F",
> + "NCT6776D/F",
> + "NCT6779D",
> + "NCT6791D",
> + "NCT6792D",
> + "NCT6793D",
> + "NCT6795D",
> + "NCT6796D",
> + "NCT6797D",
> + "NCT6798D",
> +};
> +
> +static unsigned short force_id;
> +module_param(force_id, ushort, 0);
> +MODULE_PARM_DESC(force_id, "Override the detected device ID");
> +
> +static unsigned short fan_debounce;
> +module_param(fan_debounce, ushort, 0);
> +MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal");
> +
> +#define DRVNAME "nct6775-platform"
> +
> +#define NCT6775_PORT_CHIPID 0x58
> +
> +/*
> + * ISA constants
> + */
> +
> +#define IOREGION_ALIGNMENT (~7)
> +#define IOREGION_OFFSET 5
> +#define IOREGION_LENGTH 2
> +#define ADDR_REG_OFFSET 0
> +#define DATA_REG_OFFSET 1
> +
> +/*
> + * Super-I/O constants and functions
> + */
> +
> +#define NCT6775_LD_ACPI 0x0a
> +#define NCT6775_LD_HWM 0x0b
> +#define NCT6775_LD_VID 0x0d
> +#define NCT6775_LD_12 0x12
> +
> +#define SIO_REG_LDSEL 0x07 /* Logical device select */
> +#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */
> +#define SIO_REG_ENABLE 0x30 /* Logical device enable */
> +#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
> +
> +#define SIO_NCT6106_ID 0xc450
> +#define SIO_NCT6116_ID 0xd280
> +#define SIO_NCT6775_ID 0xb470
> +#define SIO_NCT6776_ID 0xc330
> +#define SIO_NCT6779_ID 0xc560
> +#define SIO_NCT6791_ID 0xc800
> +#define SIO_NCT6792_ID 0xc910
> +#define SIO_NCT6793_ID 0xd120
> +#define SIO_NCT6795_ID 0xd350
> +#define SIO_NCT6796_ID 0xd420
> +#define SIO_NCT6797_ID 0xd450
> +#define SIO_NCT6798_ID 0xd428
> +#define SIO_ID_MASK 0xFFF8
> +
> +/*
> + * Control registers
> + */
> +#define NCT6775_REG_CR_FAN_DEBOUNCE 0xf0
> +
> +struct nct6775_sio_data {
> + int sioreg;
> + int ld;
> + enum kinds kind;
> + enum sensor_access access;
> +
> + /* superio_() callbacks */
> + void (*sio_outb)(struct nct6775_sio_data *sio_data, int reg, int val);
> + int (*sio_inb)(struct nct6775_sio_data *sio_data, int reg);
> + void (*sio_select)(struct nct6775_sio_data *sio_data, int ld);
> + int (*sio_enter)(struct nct6775_sio_data *sio_data);
> + void (*sio_exit)(struct nct6775_sio_data *sio_data);
> +};
> +
> +#define ASUSWMI_MONITORING_GUID "466747A0-70EC-11DE-8A39-0800200C9A66"
> +#define ASUSWMI_METHODID_RSIO 0x5253494F
> +#define ASUSWMI_METHODID_WSIO 0x5753494F
> +#define ASUSWMI_METHODID_RHWM 0x5248574D
> +#define ASUSWMI_METHODID_WHWM 0x5748574D
> +#define ASUSWMI_UNSUPPORTED_METHOD 0xFFFFFFFE
> +
> +static int nct6775_asuswmi_evaluate_method(u32 method_id, u8 bank, u8 reg, u8 val, u32 *retval)
> +{
> +#if IS_ENABLED(CONFIG_ACPI_WMI)
> + u32 args = bank | (reg << 8) | (val << 16);
> + struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
> + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
> + acpi_status status;
> + union acpi_object *obj;
> + u32 tmp = ASUSWMI_UNSUPPORTED_METHOD;
> +
> + status = wmi_evaluate_method(ASUSWMI_MONITORING_GUID, 0,
> + method_id, &input, &output);
> +
> + if (ACPI_FAILURE(status))
> + return -EIO;
> +
> + obj = output.pointer;
> + if (obj && obj->type == ACPI_TYPE_INTEGER)
> + tmp = obj->integer.value;
> +
> + if (retval)
> + *retval = tmp;
> +
> + kfree(obj);
> +
> + if (tmp == ASUSWMI_UNSUPPORTED_METHOD)
> + return -ENODEV;
> + return 0;
> +#else
> + return -EOPNOTSUPP;
> +#endif
> +}
> +
> +static inline int nct6775_asuswmi_write(u8 bank, u8 reg, u8 val)
> +{
> + return nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_WHWM, bank,
> + reg, val, NULL);
> +}
> +
> +static inline int nct6775_asuswmi_read(u8 bank, u8 reg, u8 *val)
> +{
> + u32 ret, tmp = 0;
> +
> + ret = nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_RHWM, bank,
> + reg, 0, &tmp);
> + *val = tmp;
> + return ret;
> +}
> +
> +static int superio_wmi_inb(struct nct6775_sio_data *sio_data, int reg)
> +{
> + int tmp = 0;
> +
> + nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_RSIO, sio_data->ld,
> + reg, 0, &tmp);
> + return tmp;
> +}
> +
> +static void superio_wmi_outb(struct nct6775_sio_data *sio_data, int reg, int val)
> +{
> + nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_WSIO, sio_data->ld,
> + reg, val, NULL);
> +}
> +
> +static void superio_wmi_select(struct nct6775_sio_data *sio_data, int ld)
> +{
> + sio_data->ld = ld;
> +}
> +
> +static int superio_wmi_enter(struct nct6775_sio_data *sio_data)
> +{
> + return 0;
> +}
> +
> +static void superio_wmi_exit(struct nct6775_sio_data *sio_data)
> +{
> +}
> +
> +static void superio_outb(struct nct6775_sio_data *sio_data, int reg, int val)
> +{
> + int ioreg = sio_data->sioreg;
> +
> + outb(reg, ioreg);
> + outb(val, ioreg + 1);
> +}
> +
> +static int superio_inb(struct nct6775_sio_data *sio_data, int reg)
> +{
> + int ioreg = sio_data->sioreg;
> +
> + outb(reg, ioreg);
> + return inb(ioreg + 1);
> +}
> +
> +static void superio_select(struct nct6775_sio_data *sio_data, int ld)
> +{
> + int ioreg = sio_data->sioreg;
> +
> + outb(SIO_REG_LDSEL, ioreg);
> + outb(ld, ioreg + 1);
> +}
> +
> +static int superio_enter(struct nct6775_sio_data *sio_data)
> +{
> + int ioreg = sio_data->sioreg;
> +
> + /*
> + * Try to reserve <ioreg> and <ioreg + 1> for exclusive access.
> + */
> + if (!request_muxed_region(ioreg, 2, DRVNAME))
> + return -EBUSY;
> +
> + outb(0x87, ioreg);
> + outb(0x87, ioreg);
> +
> + return 0;
> +}
> +
> +static void superio_exit(struct nct6775_sio_data *sio_data)
> +{
> + int ioreg = sio_data->sioreg;
> +
> + outb(0xaa, ioreg);
> + outb(0x02, ioreg);
> + outb(0x02, ioreg + 1);
> + release_region(ioreg, 2);
> +}
> +
> +static inline void nct6775_wmi_set_bank(struct nct6775_data *data, u16 reg)
> +{
> + u8 bank = reg >> 8;
> +
> + data->bank = bank;
> +}
> +
> +static int nct6775_wmi_reg_read(void *ctx, unsigned int reg, unsigned int *val)
> +{
> + struct nct6775_data *data = ctx;
> + int err, word_sized = nct6775_reg_is_word_sized(data, reg);
> + u8 tmp = 0;
> + u16 res;
> +
> + nct6775_wmi_set_bank(data, reg);
> +
> + err = nct6775_asuswmi_read(data->bank, reg & 0xff, &tmp);
> + if (err)
> + return err;
> +
> + res = tmp;
> + if (word_sized) {
> + err = nct6775_asuswmi_read(data->bank, (reg & 0xff) + 1, &tmp);
> + if (err)
> + return err;
> +
> + res = (res << 8) + tmp;
> + }
> + *val = res;
> + return 0;
> +}
> +
> +static int nct6775_wmi_reg_write(void *ctx, unsigned int reg, unsigned int value)
> +{
> + struct nct6775_data *data = ctx;
> + int res, word_sized = nct6775_reg_is_word_sized(data, reg);
> +
> + nct6775_wmi_set_bank(data, reg);
> +
> + if (word_sized) {
> + res = nct6775_asuswmi_write(data->bank, reg & 0xff, value >> 8);
> + if (res)
> + return res;
> +
> + res = nct6775_asuswmi_write(data->bank, (reg & 0xff) + 1, value);
> + } else {
> + res = nct6775_asuswmi_write(data->bank, reg & 0xff, value);
> + }
> +
> + return res;
> +}
> +
> +/*
> + * On older chips, only registers 0x50-0x5f are banked.
> + * On more recent chips, all registers are banked.
> + * Assume that is the case and set the bank number for each access.
> + * Cache the bank number so it only needs to be set if it changes.
> + */
> +static inline void nct6775_set_bank(struct nct6775_data *data, u16 reg)
> +{
> + u8 bank = reg >> 8;
> +
> + if (data->bank != bank) {
> + outb_p(NCT6775_REG_BANK, data->addr + ADDR_REG_OFFSET);
> + outb_p(bank, data->addr + DATA_REG_OFFSET);
> + data->bank = bank;
> + }
> +}
> +
> +static int nct6775_reg_read(void *ctx, unsigned int reg, unsigned int *val)
> +{
> + struct nct6775_data *data = ctx;
> + int word_sized = nct6775_reg_is_word_sized(data, reg);
> +
> + nct6775_set_bank(data, reg);
> + outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET);
> + *val = inb_p(data->addr + DATA_REG_OFFSET);
> + if (word_sized) {
> + outb_p((reg & 0xff) + 1,
> + data->addr + ADDR_REG_OFFSET);
> + *val = (*val << 8) + inb_p(data->addr + DATA_REG_OFFSET);
> + }
> + return 0;
> +}
> +
> +static int nct6775_reg_write(void *ctx, unsigned int reg, unsigned int value)
> +{
> + struct nct6775_data *data = ctx;
> + int word_sized = nct6775_reg_is_word_sized(data, reg);
> +
> + nct6775_set_bank(data, reg);
> + outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET);
> + if (word_sized) {
> + outb_p(value >> 8, data->addr + DATA_REG_OFFSET);
> + outb_p((reg & 0xff) + 1,
> + data->addr + ADDR_REG_OFFSET);
> + }
> + outb_p(value & 0xff, data->addr + DATA_REG_OFFSET);
> + return 0;
> +}
> +
> +static void nct6791_enable_io_mapping(struct nct6775_sio_data *sio_data)
> +{
> + int val;
> +
> + val = sio_data->sio_inb(sio_data, NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE);
> + if (val & 0x10) {
> + pr_info("Enabling hardware monitor logical device mappings.\n");
> + sio_data->sio_outb(sio_data, NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE,
> + val & ~0x10);
> + }
> +}
> +
> +static int __maybe_unused nct6775_suspend(struct device *dev)
> +{
> + int err;
> + u16 tmp;
> + struct nct6775_data *data = dev_get_drvdata(dev);
> +
> + if (IS_ERR(data))
> + return PTR_ERR(data);
> +
> + mutex_lock(&data->update_lock);
> + err = nct6775_read_value(data, data->REG_VBAT, &tmp);
> + if (err)
> + goto out;
> + data->vbat = tmp;
> + if (data->kind == nct6775) {
> + err = nct6775_read_value(data, NCT6775_REG_FANDIV1, &tmp);
> + if (err)
> + goto out;
> + data->fandiv1 = tmp;
> +
> + err = nct6775_read_value(data, NCT6775_REG_FANDIV2, &tmp);
> + if (err)
> + goto out;
> + data->fandiv2 = tmp;
> + }
> +out:
> + mutex_unlock(&data->update_lock);
> +
> + return err;
> +}
> +
> +static int __maybe_unused nct6775_resume(struct device *dev)
> +{
> + struct nct6775_data *data = dev_get_drvdata(dev);
> + struct nct6775_sio_data *sio_data = dev_get_platdata(dev);
> + int i, j, err = 0;
> + u8 reg;
> +
> + mutex_lock(&data->update_lock);
> + data->bank = 0xff; /* Force initial bank selection */
> +
> + err = sio_data->sio_enter(sio_data);
> + if (err)
> + goto abort;
> +
> + sio_data->sio_select(sio_data, NCT6775_LD_HWM);
> + reg = sio_data->sio_inb(sio_data, SIO_REG_ENABLE);
> + if (reg != data->sio_reg_enable)
> + sio_data->sio_outb(sio_data, SIO_REG_ENABLE, data->sio_reg_enable);
> +
> + if (data->kind == nct6791 || data->kind == nct6792 ||
> + data->kind == nct6793 || data->kind == nct6795 ||
> + data->kind == nct6796 || data->kind == nct6797 ||
> + data->kind == nct6798)
> + nct6791_enable_io_mapping(sio_data);
> +
> + sio_data->sio_exit(sio_data);
> +
> + /* Restore limits */
> + for (i = 0; i < data->in_num; i++) {
> + if (!(data->have_in & BIT(i)))
> + continue;
> +
> + err = nct6775_write_value(data, data->REG_IN_MINMAX[0][i], data->in[i][1]);
> + if (err)
> + goto abort;
> + err = nct6775_write_value(data, data->REG_IN_MINMAX[1][i], data->in[i][2]);
> + if (err)
> + goto abort;
> + }
> +
> + for (i = 0; i < ARRAY_SIZE(data->fan_min); i++) {
> + if (!(data->has_fan_min & BIT(i)))
> + continue;
> +
> + err = nct6775_write_value(data, data->REG_FAN_MIN[i], data->fan_min[i]);
> + if (err)
> + goto abort;
> + }
> +
> + for (i = 0; i < NUM_TEMP; i++) {
> + if (!(data->have_temp & BIT(i)))
> + continue;
> +
> + for (j = 1; j < ARRAY_SIZE(data->reg_temp); j++)
> + if (data->reg_temp[j][i]) {
> + err = nct6775_write_temp(data, data->reg_temp[j][i],
> + data->temp[j][i]);
> + if (err)
> + goto abort;
> + }
> + }
> +
> + /* Restore other settings */
> + err = nct6775_write_value(data, data->REG_VBAT, data->vbat);
> + if (err)
> + goto abort;
> + if (data->kind == nct6775) {
> + err = nct6775_write_value(data, NCT6775_REG_FANDIV1, data->fandiv1);
> + if (err)
> + goto abort;
> + err = nct6775_write_value(data, NCT6775_REG_FANDIV2, data->fandiv2);
> + }
> +
> +abort:
> + /* Force re-reading all values */
> + data->valid = false;
> + mutex_unlock(&data->update_lock);
> +
> + return err;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(nct6775_dev_pm_ops, nct6775_suspend, nct6775_resume);
> +
> +static void
> +nct6775_check_fan_inputs(struct nct6775_data *data, struct nct6775_sio_data *sio_data)
> +{
> + bool fan3pin = false, fan4pin = false, fan4min = false;
> + bool fan5pin = false, fan6pin = false, fan7pin = false;
> + bool pwm3pin = false, pwm4pin = false, pwm5pin = false;
> + bool pwm6pin = false, pwm7pin = false;
> +
> + /* Store SIO_REG_ENABLE for use during resume */
> + sio_data->sio_select(sio_data, NCT6775_LD_HWM);
> + data->sio_reg_enable = sio_data->sio_inb(sio_data, SIO_REG_ENABLE);
> +
> + /* fan4 and fan5 share some pins with the GPIO and serial flash */
> + if (data->kind == nct6775) {
> + int cr2c = sio_data->sio_inb(sio_data, 0x2c);
> +
> + fan3pin = cr2c & BIT(6);
> + pwm3pin = cr2c & BIT(7);
> +
> + /* On NCT6775, fan4 shares pins with the fdc interface */
> + fan4pin = !(sio_data->sio_inb(sio_data, 0x2A) & 0x80);
> + } else if (data->kind == nct6776) {
> + bool gpok = sio_data->sio_inb(sio_data, 0x27) & 0x80;
> + const char *board_vendor, *board_name;
> +
> + board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
> + board_name = dmi_get_system_info(DMI_BOARD_NAME);
> +
> + if (board_name && board_vendor &&
> + !strcmp(board_vendor, "ASRock")) {
> + /*
> + * Auxiliary fan monitoring is not enabled on ASRock
> + * Z77 Pro4-M if booted in UEFI Ultra-FastBoot mode.
> + * Observed with BIOS version 2.00.
> + */
> + if (!strcmp(board_name, "Z77 Pro4-M")) {
> + if ((data->sio_reg_enable & 0xe0) != 0xe0) {
> + data->sio_reg_enable |= 0xe0;
> + sio_data->sio_outb(sio_data, SIO_REG_ENABLE,
> + data->sio_reg_enable);
> + }
> + }
> + }
> +
> + if (data->sio_reg_enable & 0x80)
> + fan3pin = gpok;
> + else
> + fan3pin = !(sio_data->sio_inb(sio_data, 0x24) & 0x40);
> +
> + if (data->sio_reg_enable & 0x40)
> + fan4pin = gpok;
> + else
> + fan4pin = sio_data->sio_inb(sio_data, 0x1C) & 0x01;
> +
> + if (data->sio_reg_enable & 0x20)
> + fan5pin = gpok;
> + else
> + fan5pin = sio_data->sio_inb(sio_data, 0x1C) & 0x02;
> +
> + fan4min = fan4pin;
> + pwm3pin = fan3pin;
> + } else if (data->kind == nct6106) {
> + int cr24 = sio_data->sio_inb(sio_data, 0x24);
> +
> + fan3pin = !(cr24 & 0x80);
> + pwm3pin = cr24 & 0x08;
> + } else if (data->kind == nct6116) {
> + int cr1a = sio_data->sio_inb(sio_data, 0x1a);
> + int cr1b = sio_data->sio_inb(sio_data, 0x1b);
> + int cr24 = sio_data->sio_inb(sio_data, 0x24);
> + int cr2a = sio_data->sio_inb(sio_data, 0x2a);
> + int cr2b = sio_data->sio_inb(sio_data, 0x2b);
> + int cr2f = sio_data->sio_inb(sio_data, 0x2f);
> +
> + fan3pin = !(cr2b & 0x10);
> + fan4pin = (cr2b & 0x80) || // pin 1(2)
> + (!(cr2f & 0x10) && (cr1a & 0x04)); // pin 65(66)
> + fan5pin = (cr2b & 0x80) || // pin 126(127)
> + (!(cr1b & 0x03) && (cr2a & 0x02)); // pin 94(96)
> +
> + pwm3pin = fan3pin && (cr24 & 0x08);
> + pwm4pin = fan4pin;
> + pwm5pin = fan5pin;
> + } else {
> + /*
> + * NCT6779D, NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D,
> + * NCT6797D, NCT6798D
> + */
> + int cr1a = sio_data->sio_inb(sio_data, 0x1a);
> + int cr1b = sio_data->sio_inb(sio_data, 0x1b);
> + int cr1c = sio_data->sio_inb(sio_data, 0x1c);
> + int cr1d = sio_data->sio_inb(sio_data, 0x1d);
> + int cr2a = sio_data->sio_inb(sio_data, 0x2a);
> + int cr2b = sio_data->sio_inb(sio_data, 0x2b);
> + int cr2d = sio_data->sio_inb(sio_data, 0x2d);
> + int cr2f = sio_data->sio_inb(sio_data, 0x2f);
> + bool dsw_en = cr2f & BIT(3);
> + bool ddr4_en = cr2f & BIT(4);
> + int cre0;
> + int creb;
> + int cred;
> +
> + sio_data->sio_select(sio_data, NCT6775_LD_12);
> + cre0 = sio_data->sio_inb(sio_data, 0xe0);
> + creb = sio_data->sio_inb(sio_data, 0xeb);
> + cred = sio_data->sio_inb(sio_data, 0xed);
> +
> + fan3pin = !(cr1c & BIT(5));
> + fan4pin = !(cr1c & BIT(6));
> + fan5pin = !(cr1c & BIT(7));
> +
> + pwm3pin = !(cr1c & BIT(0));
> + pwm4pin = !(cr1c & BIT(1));
> + pwm5pin = !(cr1c & BIT(2));
> +
> + switch (data->kind) {
> + case nct6791:
> + fan6pin = cr2d & BIT(1);
> + pwm6pin = cr2d & BIT(0);
> + break;
> + case nct6792:
> + fan6pin = !dsw_en && (cr2d & BIT(1));
> + pwm6pin = !dsw_en && (cr2d & BIT(0));
> + break;
> + case nct6793:
> + fan5pin |= cr1b & BIT(5);
> + fan5pin |= creb & BIT(5);
> +
> + fan6pin = !dsw_en && (cr2d & BIT(1));
> + fan6pin |= creb & BIT(3);
> +
> + pwm5pin |= cr2d & BIT(7);
> + pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
> +
> + pwm6pin = !dsw_en && (cr2d & BIT(0));
> + pwm6pin |= creb & BIT(2);
> + break;
> + case nct6795:
> + fan5pin |= cr1b & BIT(5);
> + fan5pin |= creb & BIT(5);
> +
> + fan6pin = (cr2a & BIT(4)) &&
> + (!dsw_en || (cred & BIT(4)));
> + fan6pin |= creb & BIT(3);
> +
> + pwm5pin |= cr2d & BIT(7);
> + pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
> +
> + pwm6pin = (cr2a & BIT(3)) && (cred & BIT(2));
> + pwm6pin |= creb & BIT(2);
> + break;
> + case nct6796:
> + fan5pin |= cr1b & BIT(5);
> + fan5pin |= (cre0 & BIT(3)) && !(cr1b & BIT(0));
> + fan5pin |= creb & BIT(5);
> +
> + fan6pin = (cr2a & BIT(4)) &&
> + (!dsw_en || (cred & BIT(4)));
> + fan6pin |= creb & BIT(3);
> +
> + fan7pin = !(cr2b & BIT(2));
> +
> + pwm5pin |= cr2d & BIT(7);
> + pwm5pin |= (cre0 & BIT(4)) && !(cr1b & BIT(0));
> + pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
> +
> + pwm6pin = (cr2a & BIT(3)) && (cred & BIT(2));
> + pwm6pin |= creb & BIT(2);
> +
> + pwm7pin = !(cr1d & (BIT(2) | BIT(3)));
> + break;
> + case nct6797:
> + fan5pin |= !ddr4_en && (cr1b & BIT(5));
> + fan5pin |= creb & BIT(5);
> +
> + fan6pin = cr2a & BIT(4);
> + fan6pin |= creb & BIT(3);
> +
> + fan7pin = cr1a & BIT(1);
> +
> + pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
> + pwm5pin |= !ddr4_en && (cr2d & BIT(7));
> +
> + pwm6pin = creb & BIT(2);
> + pwm6pin |= cred & BIT(2);
> +
> + pwm7pin = cr1d & BIT(4);
> + break;
> + case nct6798:
> + fan6pin = !(cr1b & BIT(0)) && (cre0 & BIT(3));
> + fan6pin |= cr2a & BIT(4);
> + fan6pin |= creb & BIT(5);
> +
> + fan7pin = cr1b & BIT(5);
> + fan7pin |= !(cr2b & BIT(2));
> + fan7pin |= creb & BIT(3);
> +
> + pwm6pin = !(cr1b & BIT(0)) && (cre0 & BIT(4));
> + pwm6pin |= !(cred & BIT(2)) && (cr2a & BIT(3));
> + pwm6pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
> +
> + pwm7pin = !(cr1d & (BIT(2) | BIT(3)));
> + pwm7pin |= cr2d & BIT(7);
> + pwm7pin |= creb & BIT(2);
> + break;
> + default: /* NCT6779D */
> + break;
> + }
> +
> + fan4min = fan4pin;
> + }
> +
> + /* fan 1 and 2 (0x03) are always present */
> + data->has_fan = 0x03 | (fan3pin << 2) | (fan4pin << 3) |
> + (fan5pin << 4) | (fan6pin << 5) | (fan7pin << 6);
> + data->has_fan_min = 0x03 | (fan3pin << 2) | (fan4min << 3) |
> + (fan5pin << 4) | (fan6pin << 5) | (fan7pin << 6);
> + data->has_pwm = 0x03 | (pwm3pin << 2) | (pwm4pin << 3) |
> + (pwm5pin << 4) | (pwm6pin << 5) | (pwm7pin << 6);
> +}
> +
> +static ssize_t
> +cpu0_vid_show(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> + struct nct6775_data *data = dev_get_drvdata(dev);
> +
> + return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
> +}
> +
> +static DEVICE_ATTR_RO(cpu0_vid);
> +
> +/* Case open detection */
> +
> +static const u8 NCT6775_REG_CR_CASEOPEN_CLR[] = { 0xe6, 0xee };
> +static const u8 NCT6775_CR_CASEOPEN_CLR_MASK[] = { 0x20, 0x01 };
> +
> +static ssize_t
> +clear_caseopen(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct nct6775_data *data = dev_get_drvdata(dev);
> + struct nct6775_sio_data *sio_data = data->driver_data;
> + int nr = to_sensor_dev_attr(attr)->index - INTRUSION_ALARM_BASE;
> + unsigned long val;
> + u8 reg;
> + int ret;
> +
> + if (kstrtoul(buf, 10, &val) || val != 0)
> + return -EINVAL;
> +
> + mutex_lock(&data->update_lock);
> +
> + /*
> + * Use CR registers to clear caseopen status.
> + * The CR registers are the same for all chips, and not all chips
> + * support clearing the caseopen status through "regular" registers.
> + */
> + ret = sio_data->sio_enter(sio_data);
> + if (ret) {
> + count = ret;
> + goto error;
> + }
> +
> + sio_data->sio_select(sio_data, NCT6775_LD_ACPI);
> + reg = sio_data->sio_inb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr]);
> + reg |= NCT6775_CR_CASEOPEN_CLR_MASK[nr];
> + sio_data->sio_outb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr], reg);
> + reg &= ~NCT6775_CR_CASEOPEN_CLR_MASK[nr];
> + sio_data->sio_outb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr], reg);
> + sio_data->sio_exit(sio_data);
> +
> + data->valid = false; /* Force cache refresh */
> +error:
> + mutex_unlock(&data->update_lock);
> + return count;
> +}
> +
> +static SENSOR_DEVICE_ATTR(intrusion0_alarm, S_IWUSR | S_IRUGO, nct6775_show_alarm,
> + clear_caseopen, INTRUSION_ALARM_BASE);
> +static SENSOR_DEVICE_ATTR(intrusion1_alarm, S_IWUSR | S_IRUGO, nct6775_show_alarm,
> + clear_caseopen, INTRUSION_ALARM_BASE + 1);
> +static SENSOR_DEVICE_ATTR(intrusion0_beep, S_IWUSR | S_IRUGO, nct6775_show_beep,
> + nct6775_store_beep, INTRUSION_ALARM_BASE);
> +static SENSOR_DEVICE_ATTR(intrusion1_beep, S_IWUSR | S_IRUGO, nct6775_show_beep,
> + nct6775_store_beep, INTRUSION_ALARM_BASE + 1);
> +static SENSOR_DEVICE_ATTR(beep_enable, S_IWUSR | S_IRUGO, nct6775_show_beep,
> + nct6775_store_beep, BEEP_ENABLE_BASE);
> +
> +static umode_t nct6775_other_is_visible(struct kobject *kobj,
> + struct attribute *attr, int index)
> +{
> + struct device *dev = kobj_to_dev(kobj);
> + struct nct6775_data *data = dev_get_drvdata(dev);
> +
> + if (index == 0 && !data->have_vid)
> + return 0;
> +
> + if (index == 1 || index == 2) {
> + if (data->ALARM_BITS[INTRUSION_ALARM_BASE + index - 1] < 0)
> + return 0;
> + }
> +
> + if (index == 3 || index == 4) {
> + if (data->BEEP_BITS[INTRUSION_ALARM_BASE + index - 3] < 0)
> + return 0;
> + }
> +
> + return nct6775_attr_mode(data, attr);
> +}
> +
> +/*
> + * nct6775_other_is_visible uses the index into the following array
> + * to determine if attributes should be created or not.
> + * Any change in order or content must be matched.
> + */
> +static struct attribute *nct6775_attributes_other[] = {
> + &dev_attr_cpu0_vid.attr, /* 0 */
> + &sensor_dev_attr_intrusion0_alarm.dev_attr.attr, /* 1 */
> + &sensor_dev_attr_intrusion1_alarm.dev_attr.attr, /* 2 */
> + &sensor_dev_attr_intrusion0_beep.dev_attr.attr, /* 3 */
> + &sensor_dev_attr_intrusion1_beep.dev_attr.attr, /* 4 */
> + &sensor_dev_attr_beep_enable.dev_attr.attr, /* 5 */
> +
> + NULL
> +};
> +
> +static const struct attribute_group nct6775_group_other = {
> + .attrs = nct6775_attributes_other,
> + .is_visible = nct6775_other_is_visible,
> +};
> +
> +static int nct6775_platform_probe_init(struct nct6775_data *data)
> +{
> + int err;
> + u8 cr2a;
> + struct nct6775_sio_data *sio_data = data->driver_data;
> +
> + err = sio_data->sio_enter(sio_data);
> + if (err)
> + return err;
> +
> + cr2a = sio_data->sio_inb(sio_data, 0x2a);
> + switch (data->kind) {
> + case nct6775:
> + data->have_vid = (cr2a & 0x40);
> + break;
> + case nct6776:
> + data->have_vid = (cr2a & 0x60) == 0x40;
> + break;
> + case nct6106:
> + case nct6116:
> + case nct6779:
> + case nct6791:
> + case nct6792:
> + case nct6793:
> + case nct6795:
> + case nct6796:
> + case nct6797:
> + case nct6798:
> + break;
> + }
> +
> + /*
> + * Read VID value
> + * We can get the VID input values directly at logical device D 0xe3.
> + */
> + if (data->have_vid) {
> + sio_data->sio_select(sio_data, NCT6775_LD_VID);
> + data->vid = sio_data->sio_inb(sio_data, 0xe3);
> + data->vrm = vid_which_vrm();
> + }
> +
> + if (fan_debounce) {
> + u8 tmp;
> +
> + sio_data->sio_select(sio_data, NCT6775_LD_HWM);
> + tmp = sio_data->sio_inb(sio_data,
> + NCT6775_REG_CR_FAN_DEBOUNCE);
> + switch (data->kind) {
> + case nct6106:
> + case nct6116:
> + tmp |= 0xe0;
> + break;
> + case nct6775:
> + tmp |= 0x1e;
> + break;
> + case nct6776:
> + case nct6779:
> + tmp |= 0x3e;
> + break;
> + case nct6791:
> + case nct6792:
> + case nct6793:
> + case nct6795:
> + case nct6796:
> + case nct6797:
> + case nct6798:
> + tmp |= 0x7e;
> + break;
> + }
> + sio_data->sio_outb(sio_data, NCT6775_REG_CR_FAN_DEBOUNCE,
> + tmp);
> + pr_info("Enabled fan debounce for chip %s\n", data->name);
> + }
> +
> + nct6775_check_fan_inputs(data, sio_data);
> +
> + sio_data->sio_exit(sio_data);
> +
> + return nct6775_add_attr_group(data, &nct6775_group_other);
> +}
> +
> +static const struct regmap_config nct6775_regmap_config = {
> + .reg_bits = 16,
> + .val_bits = 16,
> + .reg_read = nct6775_reg_read,
> + .reg_write = nct6775_reg_write,
> +};
> +
> +static const struct regmap_config nct6775_wmi_regmap_config = {
> + .reg_bits = 16,
> + .val_bits = 16,
> + .reg_read = nct6775_wmi_reg_read,
> + .reg_write = nct6775_wmi_reg_write,
> +};
> +
> +static int nct6775_platform_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct nct6775_sio_data *sio_data = dev_get_platdata(dev);
> + struct nct6775_data *data;
> + struct resource *res;
> + const struct regmap_config *regmapcfg;
> +
> + if (sio_data->access == access_direct) {
> + res = platform_get_resource(pdev, IORESOURCE_IO, 0);
> + if (!devm_request_region(&pdev->dev, res->start, IOREGION_LENGTH, DRVNAME))
> + return -EBUSY;
> + }
> +
> + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + data->kind = sio_data->kind;
> + data->sioreg = sio_data->sioreg;
> +
> + if (sio_data->access == access_direct) {
> + data->addr = res->start;
> + regmapcfg = &nct6775_regmap_config;
> + } else {
> + regmapcfg = &nct6775_wmi_regmap_config;
> + }
> +
> + platform_set_drvdata(pdev, data);
> +
> + data->driver_data = sio_data;
> + data->driver_init = nct6775_platform_probe_init;
> +
> + return nct6775_probe(&pdev->dev, data, regmapcfg);
> +}
> +
> +static struct platform_driver nct6775_driver = {
> + .driver = {
> + .name = DRVNAME,
> + .pm = &nct6775_dev_pm_ops,
> + },
> + .probe = nct6775_platform_probe,
> +};
> +
> +/* nct6775_find() looks for a '627 in the Super-I/O config space */
> +static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data)
> +{
> + u16 val;
> + int err;
> + int addr;
> +
> + sio_data->access = access_direct;
> + sio_data->sioreg = sioaddr;
> +
> + err = sio_data->sio_enter(sio_data);
> + if (err)
> + return err;
> +
> + val = (sio_data->sio_inb(sio_data, SIO_REG_DEVID) << 8) |
> + sio_data->sio_inb(sio_data, SIO_REG_DEVID + 1);
> + if (force_id && val != 0xffff)
> + val = force_id;
> +
> + switch (val & SIO_ID_MASK) {
> + case SIO_NCT6106_ID:
> + sio_data->kind = nct6106;
> + break;
> + case SIO_NCT6116_ID:
> + sio_data->kind = nct6116;
> + break;
> + case SIO_NCT6775_ID:
> + sio_data->kind = nct6775;
> + break;
> + case SIO_NCT6776_ID:
> + sio_data->kind = nct6776;
> + break;
> + case SIO_NCT6779_ID:
> + sio_data->kind = nct6779;
> + break;
> + case SIO_NCT6791_ID:
> + sio_data->kind = nct6791;
> + break;
> + case SIO_NCT6792_ID:
> + sio_data->kind = nct6792;
> + break;
> + case SIO_NCT6793_ID:
> + sio_data->kind = nct6793;
> + break;
> + case SIO_NCT6795_ID:
> + sio_data->kind = nct6795;
> + break;
> + case SIO_NCT6796_ID:
> + sio_data->kind = nct6796;
> + break;
> + case SIO_NCT6797_ID:
> + sio_data->kind = nct6797;
> + break;
> + case SIO_NCT6798_ID:
> + sio_data->kind = nct6798;
> + break;
> + default:
> + if (val != 0xffff)
> + pr_debug("unsupported chip ID: 0x%04x\n", val);
> + sio_data->sio_exit(sio_data);
> + return -ENODEV;
> + }
> +
> + /* We have a known chip, find the HWM I/O address */
> + sio_data->sio_select(sio_data, NCT6775_LD_HWM);
> + val = (sio_data->sio_inb(sio_data, SIO_REG_ADDR) << 8)
> + | sio_data->sio_inb(sio_data, SIO_REG_ADDR + 1);
> + addr = val & IOREGION_ALIGNMENT;
> + if (addr == 0) {
> + pr_err("Refusing to enable a Super-I/O device with a base I/O port 0\n");
> + sio_data->sio_exit(sio_data);
> + return -ENODEV;
> + }
> +
> + /* Activate logical device if needed */
> + val = sio_data->sio_inb(sio_data, SIO_REG_ENABLE);
> + if (!(val & 0x01)) {
> + pr_warn("Forcibly enabling Super-I/O. Sensor is probably unusable.\n");
> + sio_data->sio_outb(sio_data, SIO_REG_ENABLE, val | 0x01);
> + }
> +
> + if (sio_data->kind == nct6791 || sio_data->kind == nct6792 ||
> + sio_data->kind == nct6793 || sio_data->kind == nct6795 ||
> + sio_data->kind == nct6796 || sio_data->kind == nct6797 ||
> + sio_data->kind == nct6798)
> + nct6791_enable_io_mapping(sio_data);
> +
> + sio_data->sio_exit(sio_data);
> + pr_info("Found %s or compatible chip at %#x:%#x\n",
> + nct6775_sio_names[sio_data->kind], sioaddr, addr);
> +
> + return addr;
> +}
> +
> +/*
> + * when Super-I/O functions move to a separate file, the Super-I/O
> + * bus will manage the lifetime of the device and this module will only keep
> + * track of the nct6775 driver. But since we use platform_device_alloc(), we
> + * must keep track of the device
> + */
> +static struct platform_device *pdev[2];
> +
> +static const char * const asus_wmi_boards[] = {
> + "ProArt X570-CREATOR WIFI",
> + "Pro B550M-C",
> + "Pro WS X570-ACE",
> + "PRIME B360-PLUS",
> + "PRIME B460-PLUS",
> + "PRIME B550-PLUS",
> + "PRIME B550M-A",
> + "PRIME B550M-A (WI-FI)",
> + "PRIME X570-P",
> + "PRIME X570-PRO",
> + "ROG CROSSHAIR VIII DARK HERO",
> + "ROG CROSSHAIR VIII FORMULA",
> + "ROG CROSSHAIR VIII HERO",
> + "ROG CROSSHAIR VIII IMPACT",
> + "ROG STRIX B550-A GAMING",
> + "ROG STRIX B550-E GAMING",
> + "ROG STRIX B550-F GAMING",
> + "ROG STRIX B550-F GAMING (WI-FI)",
> + "ROG STRIX B550-F GAMING WIFI II",
> + "ROG STRIX B550-I GAMING",
> + "ROG STRIX B550-XE GAMING (WI-FI)",
> + "ROG STRIX X570-E GAMING",
> + "ROG STRIX X570-F GAMING",
> + "ROG STRIX X570-I GAMING",
> + "ROG STRIX Z390-E GAMING",
> + "ROG STRIX Z390-F GAMING",
> + "ROG STRIX Z390-H GAMING",
> + "ROG STRIX Z390-I GAMING",
> + "ROG STRIX Z490-A GAMING",
> + "ROG STRIX Z490-E GAMING",
> + "ROG STRIX Z490-F GAMING",
> + "ROG STRIX Z490-G GAMING",
> + "ROG STRIX Z490-G GAMING (WI-FI)",
> + "ROG STRIX Z490-H GAMING",
> + "ROG STRIX Z490-I GAMING",
> + "TUF GAMING B550M-PLUS",
> + "TUF GAMING B550M-PLUS (WI-FI)",
> + "TUF GAMING B550-PLUS",
> + "TUF GAMING B550-PRO",
> + "TUF GAMING X570-PLUS",
> + "TUF GAMING X570-PLUS (WI-FI)",
> + "TUF GAMING X570-PRO (WI-FI)",
> + "TUF GAMING Z490-PLUS",
> + "TUF GAMING Z490-PLUS (WI-FI)",
> +};
> +
> +static int __init sensors_nct6775_platform_init(void)
> +{
> + int i, err;
> + bool found = false;
> + int address;
> + struct resource res;
> + struct nct6775_sio_data sio_data;
> + int sioaddr[2] = { 0x2e, 0x4e };
> + enum sensor_access access = access_direct;
> + const char *board_vendor, *board_name;
> + u8 tmp;
> +
> + err = platform_driver_register(&nct6775_driver);
> + if (err)
> + return err;
> +
> + board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
> + board_name = dmi_get_system_info(DMI_BOARD_NAME);
> +
> + if (board_name && board_vendor &&
> + !strcmp(board_vendor, "ASUSTeK COMPUTER INC.")) {
> + err = match_string(asus_wmi_boards, ARRAY_SIZE(asus_wmi_boards),
> + board_name);
> + if (err >= 0) {
> + /* if reading chip id via WMI succeeds, use WMI */
> + if (!nct6775_asuswmi_read(0, NCT6775_PORT_CHIPID, &tmp) && tmp) {
> + pr_info("Using Asus WMI to access %#x chip.\n", tmp);
> + access = access_asuswmi;
> + } else {
> + pr_err("Can't read ChipID by Asus WMI.\n");
> + }
> + }
> + }
> +
> + /*
> + * initialize sio_data->kind and sio_data->sioreg.
> + *
> + * when Super-I/O functions move to a separate file, the Super-I/O
> + * driver will probe 0x2e and 0x4e and auto-detect the presence of a
> + * nct6775 hardware monitor, and call probe()
> + */
> + for (i = 0; i < ARRAY_SIZE(pdev); i++) {
> + sio_data.sio_outb = superio_outb;
> + sio_data.sio_inb = superio_inb;
> + sio_data.sio_select = superio_select;
> + sio_data.sio_enter = superio_enter;
> + sio_data.sio_exit = superio_exit;
> +
> + address = nct6775_find(sioaddr[i], &sio_data);
> + if (address <= 0)
> + continue;
> +
> + found = true;
> +
> + sio_data.access = access;
> +
> + if (access == access_asuswmi) {
> + sio_data.sio_outb = superio_wmi_outb;
> + sio_data.sio_inb = superio_wmi_inb;
> + sio_data.sio_select = superio_wmi_select;
> + sio_data.sio_enter = superio_wmi_enter;
> + sio_data.sio_exit = superio_wmi_exit;
> + }
> +
> + pdev[i] = platform_device_alloc(DRVNAME, address);
> + if (!pdev[i]) {
> + err = -ENOMEM;
> + goto exit_device_unregister;
> + }
> +
> + err = platform_device_add_data(pdev[i], &sio_data,
> + sizeof(struct nct6775_sio_data));
> + if (err)
> + goto exit_device_put;
> +
> + if (sio_data.access == access_direct) {
> + memset(&res, 0, sizeof(res));
> + res.name = DRVNAME;
> + res.start = address + IOREGION_OFFSET;
> + res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1;
> + res.flags = IORESOURCE_IO;
> +
> + err = acpi_check_resource_conflict(&res);
> + if (err) {
> + platform_device_put(pdev[i]);
> + pdev[i] = NULL;
> + continue;
> + }
> +
> + err = platform_device_add_resources(pdev[i], &res, 1);
> + if (err)
> + goto exit_device_put;
> + }
> +
> + /* platform_device_add calls probe() */
> + err = platform_device_add(pdev[i]);
> + if (err)
> + goto exit_device_put;
> + }
> + if (!found) {
> + err = -ENODEV;
> + goto exit_unregister;
> + }
> +
> + return 0;
> +
> +exit_device_put:
> + platform_device_put(pdev[i]);
> +exit_device_unregister:
> + while (--i >= 0) {
> + if (pdev[i])
> + platform_device_unregister(pdev[i]);
> + }
> +exit_unregister:
> + platform_driver_unregister(&nct6775_driver);
> + return err;
> +}
> +
> +static void __exit sensors_nct6775_platform_exit(void)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(pdev); i++) {
> + if (pdev[i])
> + platform_device_unregister(pdev[i]);
> + }
> + platform_driver_unregister(&nct6775_driver);
> +}
> +
> +MODULE_AUTHOR("Guenter Roeck <linux@xxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Platform driver for NCT6775F and compatible chips");
> +MODULE_LICENSE("GPL");
> +MODULE_IMPORT_NS(HWMON_NCT6775);
> +
> +/*
> + * For module-name compatibility with the original version of this driver
> + * prior to the core/platform/i2c split
> + */
> +MODULE_ALIAS("nct6775");
> +
> +module_init(sensors_nct6775_platform_init);
> +module_exit(sensors_nct6775_platform_exit);
> diff --git a/drivers/hwmon/nct6775.h b/drivers/hwmon/nct6775.h
> new file mode 100644
> index 000000000000..452a80bf0b86
> --- /dev/null
> +++ b/drivers/hwmon/nct6775.h
> @@ -0,0 +1,252 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +#ifndef __HWMON_NCT6775_H__
> +#define __HWMON_NCT6775_H__
> +
> +#include <linux/types.h>
> +
> +enum kinds { nct6106, nct6116, nct6775, nct6776, nct6779, nct6791, nct6792,
> + nct6793, nct6795, nct6796, nct6797, nct6798 };
> +enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 };
> +
> +#define NUM_TEMP 10 /* Max number of temp attribute sets w/ limits*/
> +#define NUM_TEMP_FIXED 6 /* Max number of fixed temp attribute sets */
> +#define NUM_TSI_TEMP 8 /* Max number of TSI temp register pairs */
> +
> +#define NUM_REG_ALARM 7 /* Max number of alarm registers */
> +#define NUM_REG_BEEP 5 /* Max number of beep registers */
> +
> +#define NUM_FAN 7
> +
> +struct nct6775_data {
> + int addr; /* IO base of hw monitor block */
> + int sioreg; /* SIO register address */
> + enum kinds kind;
> + const char *name;
> +
> + const struct attribute_group *groups[7];
> + u8 num_groups;
> +
> + u16 reg_temp[5][NUM_TEMP]; /* 0=temp, 1=temp_over, 2=temp_hyst,
> + * 3=temp_crit, 4=temp_lcrit
> + */
> + u8 temp_src[NUM_TEMP];
> + u16 reg_temp_config[NUM_TEMP];
> + const char * const *temp_label;
> + u32 temp_mask;
> + u32 virt_temp_mask;
> +
> + u16 REG_CONFIG;
> + u16 REG_VBAT;
> + u16 REG_DIODE;
> + u8 DIODE_MASK;
> +
> + const s8 *ALARM_BITS;
> + const s8 *BEEP_BITS;
> +
> + const u16 *REG_VIN;
> + const u16 *REG_IN_MINMAX[2];
> +
> + const u16 *REG_TARGET;
> + const u16 *REG_FAN;
> + const u16 *REG_FAN_MODE;
> + const u16 *REG_FAN_MIN;
> + const u16 *REG_FAN_PULSES;
> + const u16 *FAN_PULSE_SHIFT;
> + const u16 *REG_FAN_TIME[3];
> +
> + const u16 *REG_TOLERANCE_H;
> +
> + const u8 *REG_PWM_MODE;
> + const u8 *PWM_MODE_MASK;
> +
> + const u16 *REG_PWM[7]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor,
> + * [3]=pwm_max, [4]=pwm_step,
> + * [5]=weight_duty_step, [6]=weight_duty_base
> + */
> + const u16 *REG_PWM_READ;
> +
> + const u16 *REG_CRITICAL_PWM_ENABLE;
> + u8 CRITICAL_PWM_ENABLE_MASK;
> + const u16 *REG_CRITICAL_PWM;
> +
> + const u16 *REG_AUTO_TEMP;
> + const u16 *REG_AUTO_PWM;
> +
> + const u16 *REG_CRITICAL_TEMP;
> + const u16 *REG_CRITICAL_TEMP_TOLERANCE;
> +
> + const u16 *REG_TEMP_SOURCE; /* temp register sources */
> + const u16 *REG_TEMP_SEL;
> + const u16 *REG_WEIGHT_TEMP_SEL;
> + const u16 *REG_WEIGHT_TEMP[3]; /* 0=base, 1=tolerance, 2=step */
> +
> + const u16 *REG_TEMP_OFFSET;
> +
> + const u16 *REG_ALARM;
> + const u16 *REG_BEEP;
> +
> + const u16 *REG_TSI_TEMP;
> +
> + unsigned int (*fan_from_reg)(u16 reg, unsigned int divreg);
> + unsigned int (*fan_from_reg_min)(u16 reg, unsigned int divreg);
> +
> + struct mutex update_lock;
> + bool valid; /* true if following fields are valid */
> + unsigned long last_updated; /* In jiffies */
> +
> + /* Register values */
> + u8 bank; /* current register bank */
> + u8 in_num; /* number of in inputs we have */
> + u8 in[15][3]; /* [0]=in, [1]=in_max, [2]=in_min */
> + unsigned int rpm[NUM_FAN];
> + u16 fan_min[NUM_FAN];
> + u8 fan_pulses[NUM_FAN];
> + u8 fan_div[NUM_FAN];
> + u8 has_pwm;
> + u8 has_fan; /* some fan inputs can be disabled */
> + u8 has_fan_min; /* some fans don't have min register */
> + bool has_fan_div;
> +
> + u8 num_temp_alarms; /* 2, 3, or 6 */
> + u8 num_temp_beeps; /* 2, 3, or 6 */
> + u8 temp_fixed_num; /* 3 or 6 */
> + u8 temp_type[NUM_TEMP_FIXED];
> + s8 temp_offset[NUM_TEMP_FIXED];
> + s16 temp[5][NUM_TEMP]; /* 0=temp, 1=temp_over, 2=temp_hyst,
> + * 3=temp_crit, 4=temp_lcrit */
> + s16 tsi_temp[NUM_TSI_TEMP];
> + u64 alarms;
> + u64 beeps;
> +
> + u8 pwm_num; /* number of pwm */
> + u8 pwm_mode[NUM_FAN]; /* 0->DC variable voltage,
> + * 1->PWM variable duty cycle
> + */
> + enum pwm_enable pwm_enable[NUM_FAN];
> + /* 0->off
> + * 1->manual
> + * 2->thermal cruise mode (also called SmartFan I)
> + * 3->fan speed cruise mode
> + * 4->SmartFan III
> + * 5->enhanced variable thermal cruise (SmartFan IV)
> + */
> + u8 pwm[7][NUM_FAN]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor,
> + * [3]=pwm_max, [4]=pwm_step,
> + * [5]=weight_duty_step, [6]=weight_duty_base
> + */
> +
> + u8 target_temp[NUM_FAN];
> + u8 target_temp_mask;
> + u32 target_speed[NUM_FAN];
> + u32 target_speed_tolerance[NUM_FAN];
> + u8 speed_tolerance_limit;
> +
> + u8 temp_tolerance[2][NUM_FAN];
> + u8 tolerance_mask;
> +
> + u8 fan_time[3][NUM_FAN]; /* 0 = stop_time, 1 = step_up, 2 = step_down */
> +
> + /* Automatic fan speed control registers */
> + int auto_pwm_num;
> + u8 auto_pwm[NUM_FAN][7];
> + u8 auto_temp[NUM_FAN][7];
> + u8 pwm_temp_sel[NUM_FAN];
> + u8 pwm_weight_temp_sel[NUM_FAN];
> + u8 weight_temp[3][NUM_FAN]; /* 0->temp_step, 1->temp_step_tol,
> + * 2->temp_base
> + */
> +
> + u8 vid;
> + u8 vrm;
> +
> + bool have_vid;
> +
> + u16 have_temp;
> + u16 have_temp_fixed;
> + u16 have_tsi_temp;
> + u16 have_in;
> +
> + /* Remember extra register values over suspend/resume */
> + u8 vbat;
> + u8 fandiv1;
> + u8 fandiv2;
> + u8 sio_reg_enable;
> +
> + struct regmap *regmap;
> + bool read_only;
> +
> + /* driver-specific (platform, i2c) initialization hook and data */
> + int (*driver_init)(struct nct6775_data *data);
> + void *driver_data;
> +};
> +
> +static inline int nct6775_read_value(struct nct6775_data *data, u16 reg, u16 *value)
> +{
> + unsigned int tmp;
> + int ret = regmap_read(data->regmap, reg, &tmp);
> +
> + if (!ret)
> + *value = tmp;
> + return ret;
> +}
> +
> +static inline int nct6775_write_value(struct nct6775_data *data, u16 reg, u16 value)
> +{
> + return regmap_write(data->regmap, reg, value);
> +}
> +
> +bool nct6775_reg_is_word_sized(struct nct6775_data *data, u16 reg);
> +int nct6775_probe(struct device *dev, struct nct6775_data *data,
> + const struct regmap_config *regmapcfg);
> +
> +ssize_t nct6775_show_alarm(struct device *dev, struct device_attribute *attr, char *buf);
> +ssize_t nct6775_show_beep(struct device *dev, struct device_attribute *attr, char *buf);
> +ssize_t nct6775_store_beep(struct device *dev, struct device_attribute *attr, const char *buf,
> + size_t count);
> +
> +static inline int nct6775_write_temp(struct nct6775_data *data, u16 reg, u16 value)
> +{
> + if (!nct6775_reg_is_word_sized(data, reg))
> + value >>= 8;
> + return nct6775_write_value(data, reg, value);
> +}
> +
> +static inline umode_t nct6775_attr_mode(struct nct6775_data *data, struct attribute *attr)
> +{
> + return data->read_only ? (attr->mode & ~0222) : attr->mode;
> +}
> +
> +
> +static inline int
> +nct6775_add_attr_group(struct nct6775_data *data, const struct attribute_group *group)
> +{
> + /* Need to leave a NULL terminator at the end of data->groups */
> + if (data->num_groups == ARRAY_SIZE(data->groups) - 1)
> + return -ENOBUFS;
> +
> + data->groups[data->num_groups++] = group;
> + return 0;
> +}
> +
> +#define NCT6775_REG_BANK 0x4E
> +#define NCT6775_REG_CONFIG 0x40
> +
> +#define NCT6775_REG_FANDIV1 0x506
> +#define NCT6775_REG_FANDIV2 0x507
> +
> +#define NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE 0x28
> +
> +#define FAN_ALARM_BASE 16
> +#define TEMP_ALARM_BASE 24
> +#define INTRUSION_ALARM_BASE 30
> +#define BEEP_ENABLE_BASE 15
> +
> +/*
> + * Not currently used:
> + * REG_MAN_ID has the value 0x5ca3 for all supported chips.
> + * REG_CHIP_ID == 0x88/0xa1/0xc1 depending on chip model.
> + * REG_MAN_ID is at port 0x4f
> + * REG_CHIP_ID is at port 0x58
> + */
> +
> +#endif /* __HWMON_NCT6775_H__ */
