Scalar properties shouldn't have array constraints (minItems, maxItems,
items). These constraints can simply be dropped with any constraints under
'items' moved up a level.
Cc: Agathe Porte <agathe.porte@xxxxxxxxx>
Cc: Guenter Roeck <linux@xxxxxxxxxxxx>
Cc: Jean Delvare <jdelvare@xxxxxxxx>
Cc: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
Cc: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
Cc: Arnaud Pouliquen <arnaud.pouliquen@xxxxxxxxxxx>
Cc: Jonathan Cameron <jic23@xxxxxxxxxx>
Cc: Lars-Peter Clausen <lars@xxxxxxxxxx>
Cc: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Cc: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
Cc: Mark Brown <broonie@xxxxxxxxxx>
Cc: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
Cc: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
Cc: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Cc: linux-hwmon@xxxxxxxxxxxxxxx
Cc: alsa-devel@xxxxxxxxxxxxxxxx
Cc: linux-iio@xxxxxxxxxxxxxxx
Cc: linux-media@xxxxxxxxxxxxxxx
Cc: linux-remoteproc@xxxxxxxxxxxxxxx
Cc: linux-spi@xxxxxxxxxxxxxxx
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml | 5 ++---
.../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 4 +---
Documentation/devicetree/bindings/media/coda.yaml | 1 -
.../devicetree/bindings/media/mediatek,vcodec-decoder.yaml | 2 --
.../devicetree/bindings/media/mediatek,vcodec-encoder.yaml | 2 --
.../bindings/media/mediatek,vcodec-subdev-decoder.yaml | 1 -
.../devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml | 4 +---
Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml | 2 --
8 files changed, 4 insertions(+), 17 deletions(-)
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml
index 801ca9ba7d34..e7493e25a7d2 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml
@@ -58,9 +58,8 @@ patternProperties:
The value (two's complement) to be programmed in the channel specific N correction register.
For remote channels only.
$ref: /schemas/types.yaml#/definitions/int32
- items:
- minimum: -128
- maximum: 127
+ minimum: -128
+ maximum: 127
required:
- reg
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
index 7c260f209687..952bc900d0fa 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -108,9 +108,7 @@ patternProperties:
- [1-5]: order 1 to 5.
For audio purpose it is recommended to use order 3 to 5.
$ref: /schemas/types.yaml#/definitions/uint32
- items:
- minimum: 0
- maximum: 5
+ maximum: 5
"#io-channel-cells":
const: 1
diff --git a/Documentation/devicetree/bindings/media/coda.yaml b/Documentation/devicetree/bindings/media/coda.yaml
index 36781ee4617f..c9d5adbc8c4a 100644
--- a/Documentation/devicetree/bindings/media/coda.yaml
+++ b/Documentation/devicetree/bindings/media/coda.yaml
@@ -65,7 +65,6 @@ properties:
iram:
$ref: /schemas/types.yaml#/definitions/phandle
description: phandle pointing to the SRAM device node
- maxItems: 1
required:
- compatible
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
index 9b179bb44dfb..aa55ca65d6ed 100644
--- a/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
@@ -63,13 +63,11 @@ properties:
mediatek,vpu:
$ref: /schemas/types.yaml#/definitions/phandle
- maxItems: 1
description:
Describes point to vpu.
mediatek,scp:
$ref: /schemas/types.yaml#/definitions/phandle
- maxItems: 1
description:
Describes point to scp.
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
index e7b65a91c92c..2746dea3ce79 100644
--- a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
@@ -55,13 +55,11 @@ properties:
mediatek,vpu:
$ref: /schemas/types.yaml#/definitions/phandle
- maxItems: 1
description:
Describes point to vpu.
mediatek,scp:
$ref: /schemas/types.yaml#/definitions/phandle
- maxItems: 1
description:
Describes point to scp.
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
index 7687be0f50aa..c73bf2352aca 100644
--- a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
@@ -61,7 +61,6 @@ properties:
mediatek,scp:
$ref: /schemas/types.yaml#/definitions/phandle
- maxItems: 1
description: |
The node of system control processor (SCP), using
the remoteproc & rpmsg framework.
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
index 2424de733ee4..d99a729d2710 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
@@ -104,8 +104,7 @@ properties:
qcom,smem-state-names:
$ref: /schemas/types.yaml#/definitions/string
description: The names of the state bits used for SMP2P output
- items:
- - const: stop
+ const: stop
glink-edge:
type: object
@@ -130,7 +129,6 @@ properties:
qcom,remote-pid:
$ref: /schemas/types.yaml#/definitions/uint32
description: ID of the shared memory used by GLINK for communication with WPSS
- maxItems: 1
required:
- interrupts
diff --git a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
index b104899205f6..5de710adfa63 100644
--- a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
+++ b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
@@ -124,7 +124,6 @@ properties:
description: |
Override the default TX fifo size. Unit is words. Ignored if 0.
$ref: /schemas/types.yaml#/definitions/uint32
- maxItems: 1
default: 64
renesas,rx-fifo-size:
@@ -132,7 +131,6 @@ properties:
description: |
Override the default RX fifo size. Unit is words. Ignored if 0.
$ref: /schemas/types.yaml#/definitions/uint32
- maxItems: 1
default: 64
required:
--
2.32.0
