Add a clear_faults write-only debugfs entry for the ibm-cffps device
driver.
Certain IBM power supplies require clearing some latched faults in order
to indicate that the fault has indeed been observed/noticed.
Signed-off-by: Brandon Wyman <bjwyman@xxxxxxxxx>
---
V1 -> V2: Explain why this change is needed
drivers/hwmon/pmbus/ibm-cffps.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/hwmon/pmbus/ibm-cffps.c b/drivers/hwmon/pmbus/ibm-cffps.c
index e3294a1a54bb..3f02dde02a4b 100644
--- a/drivers/hwmon/pmbus/ibm-cffps.c
+++ b/drivers/hwmon/pmbus/ibm-cffps.c
@@ -67,6 +67,7 @@ enum {
CFFPS_DEBUGFS_CCIN,
CFFPS_DEBUGFS_FW,
CFFPS_DEBUGFS_ON_OFF_CONFIG,
+ CFFPS_DEBUGFS_CLEAR_FAULTS,
CFFPS_DEBUGFS_NUM_ENTRIES
};
@@ -274,6 +275,13 @@ static ssize_t ibm_cffps_debugfs_write(struct file *file,
if (rc)
return rc;
+ rc = 1;
+ break;
+ case CFFPS_DEBUGFS_CLEAR_FAULTS:
+ rc = i2c_smbus_write_byte(psu->client, PMBUS_CLEAR_FAULTS);
+ if (rc < 0)
+ return rc;
+
rc = 1;
break;
default:
@@ -607,6 +615,9 @@ static int ibm_cffps_probe(struct i2c_client *client)
debugfs_create_file("on_off_config", 0644, ibm_cffps_dir,
&psu->debugfs_entries[CFFPS_DEBUGFS_ON_OFF_CONFIG],
&ibm_cffps_fops);
+ debugfs_create_file("clear_faults", 0200, ibm_cffps_dir,
+ &psu->debugfs_entries[CFFPS_DEBUGFS_CLEAR_FAULTS],
+ &ibm_cffps_fops);
return 0;
}
--
2.25.1
