Re: [PATCH v3] hwmon: (aquacomputer_d5next) Add support for Aquacomputer Farbwerk 360

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Feb 27, 2022 at 08:17:48PM +0100, Aleksa Savic wrote:
> Extend aquacomputer_d5next driver to expose hardware temperature sensors
> of the Aquacomputer Farbwerk 360 RGB controller, which communicates through
> a proprietary USB HID protocol.
> 
> Four temperature sensors are available. Additionally, serial number and
> firmware version are exposed through debugfs.
> 
> This driver has been tested on x86_64.
> 
> Signed-off-by: Aleksa Savic <savicaleksa83@xxxxxxxxx>

Please fix alignments.

CHECK: Alignment should match open parenthesis
#283: FILE: drivers/hwmon/aquacomputer_d5next.c:119:
+static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr,
+				       int channel)

CHECK: Alignment should match open parenthesis
#323: FILE: drivers/hwmon/aquacomputer_d5next.c:156:
+static int aqc_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
+			     int channel, long *val)

CHECK: Alignment should match open parenthesis
#349: FILE: drivers/hwmon/aquacomputer_d5next.c:190:
+static int aqc_read_string(struct device *dev, enum hwmon_sensor_types type, u32 attr,
+				    int channel, const char **str)

CHECK: Alignment should match open parenthesis
#466: FILE: drivers/hwmon/aquacomputer_d5next.c:289:
+static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data,
+				  int size)

Thanks,
Guenter

> ---
> Changes in v3:
> - Reformatted channel info and array holding device names
> - Shortened prefix of methods and structs to aqc
> 
> Changes in v2:
> - Extended the existing aquacomputer_d5next driver instead of creating
>   a new one and extended docs
> - Moved asm include to the end
> - Report ENODATA if sensor is disconnected instead of 0 degrees
> ---
>  Documentation/hwmon/aquacomputer_d5next.rst |  49 ++-
>  drivers/hwmon/aquacomputer_d5next.c         | 388 +++++++++++++-------
>  2 files changed, 287 insertions(+), 150 deletions(-)
> 
> diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst
> index 1f4bb4ba2e4b..3373e27b707d 100644
> --- a/Documentation/hwmon/aquacomputer_d5next.rst
> +++ b/Documentation/hwmon/aquacomputer_d5next.rst
> @@ -6,22 +6,21 @@ Kernel driver aquacomputer-d5next
>  Supported devices:
>  
>  * Aquacomputer D5 Next watercooling pump
> +* Aquacomputer Farbwerk 360 RGB controller
>  
>  Author: Aleksa Savic
>  
>  Description
>  -----------
>  
> -This driver exposes hardware sensors of the Aquacomputer D5 Next watercooling
> -pump, which communicates through a proprietary USB HID protocol.
> +This driver exposes hardware sensors of listed Aquacomputer devices, which
> +communicate through proprietary USB HID protocols.
>  
> -Available sensors are pump and fan speed, power, voltage and current, as
> -well as coolant temperature. Also available through debugfs are the serial
> -number, firmware version and power-on count.
> -
> -Attaching a fan is optional and allows it to be controlled using temperature
> -curves directly from the pump. If it's not connected, the fan-related sensors
> -will report zeroes.
> +For the D5 Next pump, available sensors are pump and fan speed, power, voltage
> +and current, as well as coolant temperature. Also available through debugfs are
> +the serial number, firmware version and power-on count. Attaching a fan to it is
> +optional and allows it to be controlled using temperature curves directly from the
> +pump. If it's not connected, the fan-related sensors will report zeroes.
>  
>  The pump can be configured either through software or via its physical
>  interface. Configuring the pump through this driver is not implemented, as it
> @@ -29,33 +28,31 @@ seems to require sending it a complete configuration. That includes addressable
>  RGB LEDs, for which there is no standard sysfs interface. Thus, that task is
>  better suited for userspace tools.
>  
> +The Farbwerk 360 exposes four temperature sensors. Depending on the device,
> +not all sysfs and debugfs entries will be available.
> +
>  Usage notes
>  -----------
>  
> -The pump communicates via HID reports. The driver is loaded automatically by
> +The devices communicate via HID reports. The driver is loaded automatically by
>  the kernel and supports hotswapping.
>  
>  Sysfs entries
>  -------------
>  
> -============ =============================================
> -temp1_input  Coolant temperature (in millidegrees Celsius)
> -fan1_input   Pump speed (in RPM)
> -fan2_input   Fan speed (in RPM)
> -power1_input Pump power (in micro Watts)
> -power2_input Fan power (in micro Watts)
> -in0_input    Pump voltage (in milli Volts)
> -in1_input    Fan voltage (in milli Volts)
> -in2_input    +5V rail voltage (in milli Volts)
> -curr1_input  Pump current (in milli Amperes)
> -curr2_input  Fan current (in milli Amperes)
> -============ =============================================
> +================ =============================================
> +temp[1-4]_input  Temperature sensors (in millidegrees Celsius)
> +fan[1-2]_input   Pump/fan speed (in RPM)
> +power[1-2]_input Pump/fan power (in micro Watts)
> +in[0-2]_input    Pump/fan voltage (in milli Volts)
> +curr[1-2]_input  Pump/fan current (in milli Amperes)
> +================ =============================================
>  
>  Debugfs entries
>  ---------------
>  
> -================ ===============================================
> -serial_number    Serial number of the pump
> +================ =================================================
> +serial_number    Serial number of the device
>  firmware_version Version of installed firmware
> -power_cycles     Count of how many times the pump was powered on
> -================ ===============================================
> +power_cycles     Count of how many times the device was powered on
> +================ =================================================
> diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c
> index fb9341a53051..257a526261f1 100644
> --- a/drivers/hwmon/aquacomputer_d5next.c
> +++ b/drivers/hwmon/aquacomputer_d5next.c
> @@ -1,32 +1,41 @@
>  // SPDX-License-Identifier: GPL-2.0+
>  /*
> - * hwmon driver for Aquacomputer D5 Next watercooling pump
> + * hwmon driver for Aquacomputer devices (D5 Next, Farbwerk 360)
>   *
> - * The D5 Next sends HID reports (with ID 0x01) every second to report sensor values
> - * (coolant temperature, pump and fan speed, voltage, current and power). It responds to
> - * Get_Report requests, but returns a dummy value of no use.
> + * Aquacomputer devices send HID reports (with ID 0x01) every second to report
> + * sensor values
>   *
>   * Copyright 2021 Aleksa Savic <savicaleksa83@xxxxxxxxx>
>   */
>  
> -#include <asm/unaligned.h>
>  #include <linux/debugfs.h>
>  #include <linux/hid.h>
>  #include <linux/hwmon.h>
>  #include <linux/jiffies.h>
>  #include <linux/module.h>
>  #include <linux/seq_file.h>
> +#include <asm/unaligned.h>
>  
> -#define DRIVER_NAME			"aquacomputer-d5next"
> +#define USB_VENDOR_ID_AQUACOMPUTER	0x0c70
> +#define USB_PRODUCT_ID_D5NEXT		0xf00e
> +#define USB_PRODUCT_ID_FARBWERK360	0xf010
>  
> -#define D5NEXT_STATUS_REPORT_ID	0x01
> -#define D5NEXT_STATUS_UPDATE_INTERVAL	(2 * HZ) /* In seconds */
> +enum kinds { d5next, farbwerk360 };
>  
> -/* Register offsets for the D5 Next pump */
> +static const char *const aqc_device_names[] = {
> +	[d5next] = "d5next",
> +	[farbwerk360] = "farbwerk360"
> +};
>  
> -#define D5NEXT_SERIAL_FIRST_PART	3
> -#define D5NEXT_SERIAL_SECOND_PART	5
> -#define D5NEXT_FIRMWARE_VERSION	13
> +#define DRIVER_NAME			"aquacomputer_d5next"
> +
> +#define STATUS_REPORT_ID		0x01
> +#define STATUS_UPDATE_INTERVAL		(2 * HZ)	/* In seconds */
> +#define SERIAL_FIRST_PART		3
> +#define SERIAL_SECOND_PART		5
> +#define FIRMWARE_VERSION		13
> +
> +/* Register offsets for the D5 Next pump */
>  #define D5NEXT_POWER_CYCLES		24
>  
>  #define D5NEXT_COOLANT_TEMP		87
> @@ -44,76 +53,119 @@
>  #define D5NEXT_PUMP_CURRENT		112
>  #define D5NEXT_FAN_CURRENT		99
>  
> -/* Labels for provided values */
> -
> -#define L_COOLANT_TEMP			"Coolant temp"
> +/* Register offsets for the Farbwerk 360 RGB controller */
> +#define FARBWERK360_NUM_SENSORS		4
> +#define FARBWERK360_SENSOR_START	0x32
> +#define FARBWERK360_SENSOR_SIZE		0x02
> +#define FARBWERK360_SENSOR_DISCONNECTED	0x7FFF
>  
> -#define L_PUMP_SPEED			"Pump speed"
> -#define L_FAN_SPEED			"Fan speed"
> +/* Labels for D5 Next */
> +#define L_D5NEXT_COOLANT_TEMP		"Coolant temp"
>  
> -#define L_PUMP_POWER			"Pump power"
> -#define L_FAN_POWER			"Fan power"
> -
> -#define L_PUMP_VOLTAGE			"Pump voltage"
> -#define L_FAN_VOLTAGE			"Fan voltage"
> -#define L_5V_VOLTAGE			"+5V voltage"
> -
> -#define L_PUMP_CURRENT			"Pump current"
> -#define L_FAN_CURRENT			"Fan current"
> +static const char *const label_d5next_speeds[] = {
> +	"Pump speed",
> +	"Fan speed"
> +};
>  
> -static const char *const label_speeds[] = {
> -	L_PUMP_SPEED,
> -	L_FAN_SPEED,
> +static const char *const label_d5next_power[] = {
> +	"Pump power",
> +	"Fan power"
>  };
>  
> -static const char *const label_power[] = {
> -	L_PUMP_POWER,
> -	L_FAN_POWER,
> +static const char *const label_d5next_voltages[] = {
> +	"Pump voltage",
> +	"Fan voltage",
> +	"+5V voltage"
>  };
>  
> -static const char *const label_voltages[] = {
> -	L_PUMP_VOLTAGE,
> -	L_FAN_VOLTAGE,
> -	L_5V_VOLTAGE,
> +static const char *const label_d5next_current[] = {
> +	"Pump current",
> +	"Fan current"
>  };
>  
> -static const char *const label_current[] = {
> -	L_PUMP_CURRENT,
> -	L_FAN_CURRENT,
> +/* Labels for Farbwerk 360 temperature sensors */
> +static const char *const label_temp_sensors[] = {
> +	"Sensor 1",
> +	"Sensor 2",
> +	"Sensor 3",
> +	"Sensor 4"
>  };
>  
> -struct d5next_data {
> +struct aqc_data {
>  	struct hid_device *hdev;
>  	struct device *hwmon_dev;
>  	struct dentry *debugfs;
> -	s32 temp_input;
> +	enum kinds kind;
> +	const char *name;
> +
> +	/* General info, same across all devices */
> +	u32 serial_number[2];
> +	u16 firmware_version;
> +
> +	/* D5 Next specific - how many times the device was powered on */
> +	u32 power_cycles;
> +
> +	/* Sensor values */
> +	s32 temp_input[4];
>  	u16 speed_input[2];
>  	u32 power_input[2];
>  	u16 voltage_input[3];
>  	u16 current_input[2];
> -	u32 serial_number[2];
> -	u16 firmware_version;
> -	u32 power_cycles; /* How many times the device was powered on */
> +
>  	unsigned long updated;
>  };
>  
> -static umode_t d5next_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr,
> -				 int channel)
> +static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr,
> +				       int channel)
>  {
> -	return 0444;
> +	const struct aqc_data *priv = data;
> +
> +	switch (type) {
> +	case hwmon_temp:
> +		switch (priv->kind) {
> +		case d5next:
> +			if (channel == 0)
> +				return 0444;
> +			break;
> +		case farbwerk360:
> +			return 0444;
> +		default:
> +			break;
> +		}
> +

Unnecessary empty line.

> +		break;
> +	case hwmon_fan:
> +	case hwmon_power:
> +	case hwmon_in:
> +	case hwmon_curr:
> +		switch (priv->kind) {
> +		case d5next:
> +			return 0444;
> +		default:
> +			break;
> +		}
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	return 0;
>  }
>  
> -static int d5next_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel,
> -		       long *val)
> +static int aqc_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
> +			     int channel, long *val)
>  {
> -	struct d5next_data *priv = dev_get_drvdata(dev);
> +	struct aqc_data *priv = dev_get_drvdata(dev);
>  
> -	if (time_after(jiffies, priv->updated + D5NEXT_STATUS_UPDATE_INTERVAL))
> +	if (time_after(jiffies, priv->updated + STATUS_UPDATE_INTERVAL))
>  		return -ENODATA;
>  
>  	switch (type) {
>  	case hwmon_temp:
> -		*val = priv->temp_input;
> +		if (priv->temp_input[channel] == -ENODATA)
> +			return -ENODATA;
> +
> +		*val = priv->temp_input[channel];
>  		break;
>  	case hwmon_fan:
>  		*val = priv->speed_input[channel];
> @@ -134,24 +186,64 @@ static int d5next_read(struct device *dev, enum hwmon_sensor_types type, u32 att
>  	return 0;
>  }
>  
> -static int d5next_read_string(struct device *dev, enum hwmon_sensor_types type, u32 attr,
> -			      int channel, const char **str)
> +static int aqc_read_string(struct device *dev, enum hwmon_sensor_types type, u32 attr,
> +				    int channel, const char **str)
>  {
> +	struct aqc_data *priv = dev_get_drvdata(dev);
> +
>  	switch (type) {
>  	case hwmon_temp:
> -		*str = L_COOLANT_TEMP;
> +		switch (priv->kind) {
> +		case d5next:
> +			*str = L_D5NEXT_COOLANT_TEMP;
> +			break;
> +		case farbwerk360:
> +			*str = label_temp_sensors[channel];
> +			break;
> +		default:
> +			break;
> +		}
> +

Unnecessary empty line, and more of those. Please remove
all empty lines before break;.

>  		break;
>  	case hwmon_fan:
> -		*str = label_speeds[channel];
> +		switch (priv->kind) {
> +		case d5next:
> +			*str = label_d5next_speeds[channel];
> +			break;
> +		default:
> +			break;
> +		}
> +
>  		break;
>  	case hwmon_power:
> -		*str = label_power[channel];
> +		switch (priv->kind) {
> +		case d5next:
> +			*str = label_d5next_power[channel];
> +			break;
> +		default:
> +			break;
> +		}
> +
>  		break;
>  	case hwmon_in:
> -		*str = label_voltages[channel];
> +		switch (priv->kind) {
> +		case d5next:
> +			*str = label_d5next_voltages[channel];
> +			break;
> +		default:
> +			break;
> +		}
> +
>  		break;
>  	case hwmon_curr:
> -		*str = label_current[channel];
> +		switch (priv->kind) {
> +		case d5next:
> +			*str = label_d5next_current[channel];
> +			break;
> +		default:
> +			break;
> +		}
> +
>  		break;
>  	default:
>  		return -EOPNOTSUPP;
> @@ -160,60 +252,89 @@ static int d5next_read_string(struct device *dev, enum hwmon_sensor_types type,
>  	return 0;
>  }
>  
> -static const struct hwmon_ops d5next_hwmon_ops = {
> -	.is_visible = d5next_is_visible,
> -	.read = d5next_read,
> -	.read_string = d5next_read_string,
> +static const struct hwmon_ops aqc_hwmon_ops = {
> +	.is_visible = aqc_is_visible,
> +	.read = aqc_read,
> +	.read_string = aqc_read_string,
>  };
>  
> -static const struct hwmon_channel_info *d5next_info[] = {
> -	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_LABEL),
> -	HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_LABEL, HWMON_F_INPUT | HWMON_F_LABEL),
> -	HWMON_CHANNEL_INFO(power, HWMON_P_INPUT | HWMON_P_LABEL, HWMON_P_INPUT | HWMON_P_LABEL),
> -	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT | HWMON_I_LABEL, HWMON_I_INPUT | HWMON_I_LABEL,
> +static const struct hwmon_channel_info *aqc_info[] = {
> +	HWMON_CHANNEL_INFO(temp,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL),
> +	HWMON_CHANNEL_INFO(fan,
> +			   HWMON_F_INPUT | HWMON_F_LABEL,
> +			   HWMON_F_INPUT | HWMON_F_LABEL),
> +	HWMON_CHANNEL_INFO(power,
> +			   HWMON_P_INPUT | HWMON_P_LABEL,
> +			   HWMON_P_INPUT | HWMON_P_LABEL),
> +	HWMON_CHANNEL_INFO(in,
> +			   HWMON_I_INPUT | HWMON_I_LABEL,
> +			   HWMON_I_INPUT | HWMON_I_LABEL,
>  			   HWMON_I_INPUT | HWMON_I_LABEL),
> -	HWMON_CHANNEL_INFO(curr, HWMON_C_INPUT | HWMON_C_LABEL, HWMON_C_INPUT | HWMON_C_LABEL),
> +	HWMON_CHANNEL_INFO(curr,
> +			   HWMON_C_INPUT | HWMON_C_LABEL,
> +			   HWMON_C_INPUT | HWMON_C_LABEL),
>  	NULL
>  };
>  
> -static const struct hwmon_chip_info d5next_chip_info = {
> -	.ops = &d5next_hwmon_ops,
> -	.info = d5next_info,
> +static const struct hwmon_chip_info aqc_chip_info = {
> +	.ops = &aqc_hwmon_ops,
> +	.info = aqc_info,
>  };
>  
> -static int d5next_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data, int size)
> +static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data,
> +				  int size)
>  {
> -	struct d5next_data *priv;
> +	int i, sensor_value;
> +	struct aqc_data *priv;
>  
> -	if (report->id != D5NEXT_STATUS_REPORT_ID)
> +	if (report->id != STATUS_REPORT_ID)
>  		return 0;
>  
>  	priv = hid_get_drvdata(hdev);
>  
>  	/* Info provided with every report */
> -
> -	priv->serial_number[0] = get_unaligned_be16(data + D5NEXT_SERIAL_FIRST_PART);
> -	priv->serial_number[1] = get_unaligned_be16(data + D5NEXT_SERIAL_SECOND_PART);
> -
> -	priv->firmware_version = get_unaligned_be16(data + D5NEXT_FIRMWARE_VERSION);
> -	priv->power_cycles = get_unaligned_be32(data + D5NEXT_POWER_CYCLES);
> +	priv->serial_number[0] = get_unaligned_be16(data + SERIAL_FIRST_PART);
> +	priv->serial_number[1] = get_unaligned_be16(data + SERIAL_SECOND_PART);
> +	priv->firmware_version = get_unaligned_be16(data + FIRMWARE_VERSION);
>  
>  	/* Sensor readings */
> +	switch (priv->kind) {
> +	case d5next:
> +		priv->power_cycles = get_unaligned_be32(data + D5NEXT_POWER_CYCLES);
>  
> -	priv->temp_input = get_unaligned_be16(data + D5NEXT_COOLANT_TEMP) * 10;
> +		priv->temp_input[0] = get_unaligned_be16(data + D5NEXT_COOLANT_TEMP) * 10;
>  
> -	priv->speed_input[0] = get_unaligned_be16(data + D5NEXT_PUMP_SPEED);
> -	priv->speed_input[1] = get_unaligned_be16(data + D5NEXT_FAN_SPEED);
> +		priv->speed_input[0] = get_unaligned_be16(data + D5NEXT_PUMP_SPEED);
> +		priv->speed_input[1] = get_unaligned_be16(data + D5NEXT_FAN_SPEED);
>  
> -	priv->power_input[0] = get_unaligned_be16(data + D5NEXT_PUMP_POWER) * 10000;
> -	priv->power_input[1] = get_unaligned_be16(data + D5NEXT_FAN_POWER) * 10000;
> +		priv->power_input[0] = get_unaligned_be16(data + D5NEXT_PUMP_POWER) * 10000;
> +		priv->power_input[1] = get_unaligned_be16(data + D5NEXT_FAN_POWER) * 10000;
>  
> -	priv->voltage_input[0] = get_unaligned_be16(data + D5NEXT_PUMP_VOLTAGE) * 10;
> -	priv->voltage_input[1] = get_unaligned_be16(data + D5NEXT_FAN_VOLTAGE) * 10;
> -	priv->voltage_input[2] = get_unaligned_be16(data + D5NEXT_5V_VOLTAGE) * 10;
> +		priv->voltage_input[0] = get_unaligned_be16(data + D5NEXT_PUMP_VOLTAGE) * 10;
> +		priv->voltage_input[1] = get_unaligned_be16(data + D5NEXT_FAN_VOLTAGE) * 10;
> +		priv->voltage_input[2] = get_unaligned_be16(data + D5NEXT_5V_VOLTAGE) * 10;
>  
> -	priv->current_input[0] = get_unaligned_be16(data + D5NEXT_PUMP_CURRENT);
> -	priv->current_input[1] = get_unaligned_be16(data + D5NEXT_FAN_CURRENT);
> +		priv->current_input[0] = get_unaligned_be16(data + D5NEXT_PUMP_CURRENT);
> +		priv->current_input[1] = get_unaligned_be16(data + D5NEXT_FAN_CURRENT);
> +		break;
> +	case farbwerk360:
> +		/* Temperature sensor readings */
> +		for (i = 0; i < FARBWERK360_NUM_SENSORS; i++) {
> +			sensor_value = get_unaligned_be16(data + FARBWERK360_SENSOR_START +
> +							  i * FARBWERK360_SENSOR_SIZE);
> +			if (sensor_value == FARBWERK360_SENSOR_DISCONNECTED)
> +				priv->temp_input[i] = -ENODATA;
> +			else
> +				priv->temp_input[i] = sensor_value * 10;
> +		}
> +		break;
> +	default:
> +		break;
> +	}
>  
>  	priv->updated = jiffies;
>  
> @@ -224,57 +345,63 @@ static int d5next_raw_event(struct hid_device *hdev, struct hid_report *report,
>  
>  static int serial_number_show(struct seq_file *seqf, void *unused)
>  {
> -	struct d5next_data *priv = seqf->private;
> +	struct aqc_data *priv = seqf->private;
>  
>  	seq_printf(seqf, "%05u-%05u\n", priv->serial_number[0], priv->serial_number[1]);
>  
>  	return 0;
>  }
> +

Please remove. No such cosmetic changes, please.

>  DEFINE_SHOW_ATTRIBUTE(serial_number);
>  
>  static int firmware_version_show(struct seq_file *seqf, void *unused)
>  {
> -	struct d5next_data *priv = seqf->private;
> +	struct aqc_data *priv = seqf->private;
>  
>  	seq_printf(seqf, "%u\n", priv->firmware_version);
>  
>  	return 0;
>  }
> +

Please remove.

>  DEFINE_SHOW_ATTRIBUTE(firmware_version);
>  
>  static int power_cycles_show(struct seq_file *seqf, void *unused)
>  {
> -	struct d5next_data *priv = seqf->private;
> +	struct aqc_data *priv = seqf->private;
>  
>  	seq_printf(seqf, "%u\n", priv->power_cycles);
>  
>  	return 0;
>  }
> +

Same here.

>  DEFINE_SHOW_ATTRIBUTE(power_cycles);
>  
> -static void d5next_debugfs_init(struct d5next_data *priv)
> +static void aqc_debugfs_init(struct aqc_data *priv)
>  {
> -	char name[32];
> +	char name[64];
>  
> -	scnprintf(name, sizeof(name), "%s-%s", DRIVER_NAME, dev_name(&priv->hdev->dev));
> +	scnprintf(name, sizeof(name), "%s_%s-%s", "aquacomputer", priv->name,
> +		  dev_name(&priv->hdev->dev));
>  
>  	priv->debugfs = debugfs_create_dir(name, NULL);
>  	debugfs_create_file("serial_number", 0444, priv->debugfs, priv, &serial_number_fops);
>  	debugfs_create_file("firmware_version", 0444, priv->debugfs, priv, &firmware_version_fops);
> -	debugfs_create_file("power_cycles", 0444, priv->debugfs, priv, &power_cycles_fops);
> +
> +	if (priv->kind == d5next)
> +		debugfs_create_file("power_cycles", 0444, priv->debugfs, priv, &power_cycles_fops);
>  }
>  
>  #else
>  
> -static void d5next_debugfs_init(struct d5next_data *priv)
> +static void aqc_debugfs_init(struct aqc_data *priv)
>  {
>  }
>  
>  #endif
>  
> -static int d5next_probe(struct hid_device *hdev, const struct hid_device_id *id)
> +static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
>  {
> -	struct d5next_data *priv;
> +	struct aqc_data *priv;
>  	int ret;
>  
>  	priv = devm_kzalloc(&hdev->dev, sizeof(*priv), GFP_KERNEL);
> @@ -284,7 +411,7 @@ static int d5next_probe(struct hid_device *hdev, const struct hid_device_id *id)
>  	priv->hdev = hdev;
>  	hid_set_drvdata(hdev, priv);
>  
> -	priv->updated = jiffies - D5NEXT_STATUS_UPDATE_INTERVAL;
> +	priv->updated = jiffies - STATUS_UPDATE_INTERVAL;
>  
>  	ret = hid_parse(hdev);
>  	if (ret)
> @@ -298,15 +425,28 @@ static int d5next_probe(struct hid_device *hdev, const struct hid_device_id *id)
>  	if (ret)
>  		goto fail_and_stop;
>  
> -	priv->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, "d5next", priv,
> -							  &d5next_chip_info, NULL);
> +	switch (hdev->product) {
> +	case USB_PRODUCT_ID_D5NEXT:
> +		priv->kind = d5next;
> +		break;
> +	case USB_PRODUCT_ID_FARBWERK360:
> +		priv->kind = farbwerk360;
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	priv->name = aqc_device_names[priv->kind];
> +
> +	priv->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, priv->name, priv,
> +							  &aqc_chip_info, NULL);
>  
>  	if (IS_ERR(priv->hwmon_dev)) {
>  		ret = PTR_ERR(priv->hwmon_dev);
>  		goto fail_and_close;
>  	}
>  
> -	d5next_debugfs_init(priv);
> +	aqc_debugfs_init(priv);
>  
>  	return 0;
>  
> @@ -317,9 +457,9 @@ static int d5next_probe(struct hid_device *hdev, const struct hid_device_id *id)
>  	return ret;
>  }
>  
> -static void d5next_remove(struct hid_device *hdev)
> +static void aqc_remove(struct hid_device *hdev)
>  {
> -	struct d5next_data *priv = hid_get_drvdata(hdev);
> +	struct aqc_data *priv = hid_get_drvdata(hdev);
>  
>  	debugfs_remove_recursive(priv->debugfs);
>  	hwmon_device_unregister(priv->hwmon_dev);
> @@ -328,36 +468,36 @@ static void d5next_remove(struct hid_device *hdev)
>  	hid_hw_stop(hdev);
>  }
>  
> -static const struct hid_device_id d5next_table[] = {
> -	{ HID_USB_DEVICE(0x0c70, 0xf00e) }, /* Aquacomputer D5 Next */
> -	{},
> +static const struct hid_device_id aqc_table[] = {
> +	{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_D5NEXT) },
> +	{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_FARBWERK360) },
> +	{ }
>  };
>  
> -MODULE_DEVICE_TABLE(hid, d5next_table);
> +MODULE_DEVICE_TABLE(hid, aqc_table);
>  
> -static struct hid_driver d5next_driver = {
> +static struct hid_driver aqc_driver = {
>  	.name = DRIVER_NAME,
> -	.id_table = d5next_table,
> -	.probe = d5next_probe,
> -	.remove = d5next_remove,
> -	.raw_event = d5next_raw_event,
> +	.id_table = aqc_table,
> +	.probe = aqc_probe,
> +	.remove = aqc_remove,
> +	.raw_event = aqc_raw_event,
>  };
>  
> -static int __init d5next_init(void)
> +static int __init aqc_init(void)
>  {
> -	return hid_register_driver(&d5next_driver);
> +	return hid_register_driver(&aqc_driver);
>  }
>  
> -static void __exit d5next_exit(void)
> +static void __exit aqc_exit(void)
>  {
> -	hid_unregister_driver(&d5next_driver);
> +	hid_unregister_driver(&aqc_driver);
>  }
>  
>  /* Request to initialize after the HID bus to ensure it's not being loaded before */
> -
> -late_initcall(d5next_init);
> -module_exit(d5next_exit);
> +late_initcall(aqc_init);
> +module_exit(aqc_exit);
>  
>  MODULE_LICENSE("GPL");
>  MODULE_AUTHOR("Aleksa Savic <savicaleksa83@xxxxxxxxx>");
> -MODULE_DESCRIPTION("Hwmon driver for Aquacomputer D5 Next pump");
> +MODULE_DESCRIPTION("Hwmon driver for Aquacomputer devices");
> -- 
> 2.35.1
> 



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux