On Fri, Feb 18, 2022 at 10:06:43AM +0100, Christian Lamparter wrote: > The TMP125 is a 2 degree Celsius accurate Digital > Temperature Sensor with a SPI interface. > > The temperature register is a 16-bit, read-only register. > The MSB (Bit 15) is a leading zero and never set. Bits 14 > to 5 are the 1+9 temperature data bits in a two's > complement format. Bits 4 to 0 are useless copies of > Bit 5 value and therefore ignored. > > This was tested on a Aerohive HiveAP-350. > > Bonus: lm70 supports TMP122/TMP124 as well. > I added them to the Kconfig module description. > > Signed-off-by: Christian Lamparter <chunkeey@xxxxxxxxx> Applied to hwmon-next. Thanks, Guenter > --- > v1 -> v2: - spelling fixes + nicer (IMHO) texts (Roeck) > - added entry to Documentation/hwmon/lm70.rst (Roeck) > --- > Documentation/hwmon/lm70.rst | 7 +++++++ > drivers/hwmon/Kconfig | 4 ++-- > drivers/hwmon/lm70.c | 16 ++++++++++++++++ > 3 files changed, 25 insertions(+), 2 deletions(-) > > diff --git a/Documentation/hwmon/lm70.rst b/Documentation/hwmon/lm70.rst > index 6ddc5b67ccb5..11303a7e16a8 100644 > --- a/Documentation/hwmon/lm70.rst > +++ b/Documentation/hwmon/lm70.rst > @@ -15,6 +15,10 @@ Supported chips: > > Information: https://www.ti.com/product/tmp122 > > + * Texas Instruments TMP125 > + > + Information: https://www.ti.com/product/tmp125 > + > * National Semiconductor LM71 > > Datasheet: https://www.ti.com/product/LM71 > @@ -53,6 +57,9 @@ The LM74 and TMP121/TMP122/TMP123/TMP124 are very similar; main difference is > > The TMP122/TMP124 also feature configurable temperature thresholds. > > +The TMP125 is less accurate and provides 10-bit temperature data > +with 0.25 degrees Celsius resolution. > + > The LM71 is also very similar; main difference is 14-bit temperature > data (0.03125 degrees celsius resolution). > > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > index 8df25f1079ba..94a47e70533f 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -1208,8 +1208,8 @@ config SENSORS_LM70 > depends on SPI_MASTER > help > If you say yes here you get support for the National Semiconductor > - LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera- > - ture sensor chips. > + LM70, LM71, LM74 and Texas Instruments TMP121/TMP123, TMP122/TMP124, > + TMP125 digital temperature sensor chips. > > This driver can also be built as a module. If so, the module > will be called lm70. > diff --git a/drivers/hwmon/lm70.c b/drivers/hwmon/lm70.c > index d2a60de5b8de..c20a749fc7f2 100644 > --- a/drivers/hwmon/lm70.c > +++ b/drivers/hwmon/lm70.c > @@ -34,6 +34,7 @@ > #define LM70_CHIP_LM71 2 /* NS LM71 */ > #define LM70_CHIP_LM74 3 /* NS LM74 */ > #define LM70_CHIP_TMP122 4 /* TI TMP122/TMP124 */ > +#define LM70_CHIP_TMP125 5 /* TI TMP125 */ > > struct lm70 { > struct spi_device *spi; > @@ -87,6 +88,12 @@ static ssize_t temp1_input_show(struct device *dev, > * LM71: > * 14 bits of 2's complement data, discard LSB 2 bits, > * resolution 0.0312 degrees celsius. > + * > + * TMP125: > + * MSB/D15 is a leading zero. D14 is the sign-bit. This is > + * followed by 9 temperature bits (D13..D5) in 2's complement > + * data format with a resolution of 0.25 degrees celsius per unit. > + * LSB 5 bits (D4..D0) share the same value as D5 and get discarded. > */ > switch (p_lm70->chip) { > case LM70_CHIP_LM70: > @@ -102,6 +109,10 @@ static ssize_t temp1_input_show(struct device *dev, > case LM70_CHIP_LM71: > val = ((int)raw / 4) * 3125 / 100; > break; > + > + case LM70_CHIP_TMP125: > + val = (sign_extend32(raw, 14) / 32) * 250; > + break; > } > > status = sprintf(buf, "%d\n", val); /* millidegrees Celsius */ > @@ -135,6 +146,10 @@ static const struct of_device_id lm70_of_ids[] = { > .compatible = "ti,tmp122", > .data = (void *) LM70_CHIP_TMP122, > }, > + { > + .compatible = "ti,tmp125", > + .data = (void *) LM70_CHIP_TMP125, > + }, > { > .compatible = "ti,lm71", > .data = (void *) LM70_CHIP_LM71, > @@ -184,6 +199,7 @@ static const struct spi_device_id lm70_ids[] = { > { "lm70", LM70_CHIP_LM70 }, > { "tmp121", LM70_CHIP_TMP121 }, > { "tmp122", LM70_CHIP_TMP122 }, > + { "tmp125", LM70_CHIP_TMP125 }, > { "lm71", LM70_CHIP_LM71 }, > { "lm74", LM70_CHIP_LM74 }, > { },
