Add regulator support for PLI1209BC Digital Supervisor.
Signed-off-by: Marcello Sylvester Bauer <sylv@xxxxxxx>
---
drivers/hwmon/pmbus/Kconfig | 7 +++++++
drivers/hwmon/pmbus/pli1209bc.c | 31 +++++++++++++++++++++++++++++++
2 files changed, 38 insertions(+)
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index f18f67a94697..6552467c588d 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -326,6 +326,13 @@ config SENSORS_PLI1209BC
This driver can also be built as a module. If so, the module will
be called pli1209bc.
+config SENSORS_PLI1209BC_REGULATOR
+ bool "Regulator support for PLI1209BC"
+ depends on SENSORS_PLI1209BC && REGULATOR
+ help
+ If you say yes here you get regulator support for Vicor PLI1209BC
+ Digital Supervisor.
+
config SENSORS_PM6764TR
tristate "ST PM6764TR"
help
diff --git a/drivers/hwmon/pmbus/pli1209bc.c b/drivers/hwmon/pmbus/pli1209bc.c
index 5f8847307e55..05b4ee35ba27 100644
--- a/drivers/hwmon/pmbus/pli1209bc.c
+++ b/drivers/hwmon/pmbus/pli1209bc.c
@@ -8,6 +8,7 @@
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/pmbus.h>
+#include <linux/regulator/driver.h>
#include "pmbus.h"
/*
@@ -33,11 +34,37 @@ static int pli1209bc_read_word_data(struct i2c_client *client, int page,
return data;
data = sign_extend32(data, 15) * 10;
return clamp_val(data, -32768, 32767) & 0xffff;
+ /*
+ * PMBUS_READ_VOUT and PMBUS_READ_TEMPERATURE_1 return invalid data
+ * when the BCM is turned off. Since it is not possible to return
+ * ENODATA error, return zero instead.
+ */
+ case PMBUS_READ_VOUT:
+ case PMBUS_READ_TEMPERATURE_1:
+ data = pmbus_read_word_data(client, page, phase,
+ PMBUS_STATUS_WORD);
+ if (data < 0)
+ return data;
+ if (data & PB_STATUS_POWER_GOOD_N)
+ return 0;
+ return pmbus_read_word_data(client, page, phase, reg);
default:
return -ENODATA;
}
}
+#if IS_ENABLED(CONFIG_SENSORS_PLI1209BC_REGULATOR)
+static const struct regulator_desc pli1209bc_reg_desc = {
+ .name = "vout2",
+ .id = 1,
+ .of_match = of_match_ptr("vout2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .ops = &pmbus_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+};
+#endif
+
static struct pmbus_driver_info pli1209bc_info = {
.pages = 2,
.format[PSC_VOLTAGE_IN] = direct,
@@ -75,6 +102,10 @@ static struct pmbus_driver_info pli1209bc_info = {
| PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
| PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT,
.read_word_data = pli1209bc_read_word_data,
+#if IS_ENABLED(CONFIG_SENSORS_PLI1209BC_REGULATOR)
+ .num_regulators = 1,
+ .reg_desc = &pli1209bc_reg_desc,
+#endif
};
static int pli1209bc_probe(struct i2c_client *client)
--
2.34.1
