Re: [PATCH 3/4] dt-bindings: Add power-efuse binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Feb 17, 2022 at 02:35:12PM PST, Rob Herring wrote:
On Thu, Feb 17, 2022 at 02:44:43AM -0800, Zev Weiss wrote:
This can be used to describe a power output supplied by a regulator
device that the system controls.

Signed-off-by: Zev Weiss <zev@xxxxxxxxxxxxxxxxx>
---
 .../devicetree/bindings/misc/power-efuse.yaml | 37 +++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/misc/power-efuse.yaml

diff --git a/Documentation/devicetree/bindings/misc/power-efuse.yaml b/Documentation/devicetree/bindings/misc/power-efuse.yaml
new file mode 100644
index 000000000000..cadce15d2ce7
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/power-efuse.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/power-efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic power efuse device

No idea what this is, but I doubt any such generic device exists. This
needs sufficient description to be convincing that it is indeed generic.


I was struggling a bit to come up with a reasonably concise title; this admittedly isn't great.

Would a description like the following clarify it adequately?

  description: |
This binding describes a physical power output supplied by a regulator providing efuse functionality (manual on/off control, and auto-shutoff if current, voltage, or thermal limits are exceeded). These may be found on systems such as "smart" network PDUs, and typically supply power to devices entirely separate from the system described by the device-tree by way of an external connector such as an Open19 power cable:

    https://www.open19.org/marketplace/coolpower-cable-assembly-8ru/


+
+maintainers:
+ - Zev Weiss <zev@xxxxxxxxxxxxxxxxx>
+
+properties:
+  compatible:
+    const: power-efuse
+
+  vout-supply:
+    description:
+      phandle to the regulator providing power for the efuse
+
+  error-flags-cache-ttl-ms:
+    description:
+      The number of milliseconds the vout-supply regulator's error
+      flags should be cached before re-fetching them.

What are 'error flags'? Not something I've heard with respect to
regulators.


That refers to the REGULATOR_ERROR_* flags in include/linux/regulator/consumer.h, in whatever "physical" form those ultimately take -- for example, in the PMBus-based case I'm currently aiming to support, they'd map to the flags returned by PMBus STATUS_* commands.

Thanks for the review,
Zev




[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux