[PATCH v3 4/4] hwmon: (sch56xx-common) Replace WDOG_ACTIVE with WDOG_HW_RUNNING

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



If the watchdog was already enabled by the BIOS after booting, the
watchdog infrastructure needs to regularly send keepalives to
prevent a unexpected reset.
WDOG_ACTIVE only serves as an status indicator for userspace,
we want to use WDOG_HW_RUNNING instead.

Since my Fujitsu Esprimo P720 does not support the watchdog,
this change is compile-tested only.

Suggested-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Fixes: fb551405c0f8 (watchdog: sch56xx: Use watchdog core)
Signed-off-by: Armin Wolf <W_Armin@xxxxxx>
---
 drivers/hwmon/sch56xx-common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/sch56xx-common.c b/drivers/hwmon/sch56xx-common.c
index 82602b74c7ed..3ece53adabd6 100644
--- a/drivers/hwmon/sch56xx-common.c
+++ b/drivers/hwmon/sch56xx-common.c
@@ -427,7 +427,7 @@ void sch56xx_watchdog_register(struct device *parent, u16 addr, u32 revision,
 	data->wddev.max_timeout = 255 * 60;
 	watchdog_set_nowayout(&data->wddev, nowayout);
 	if (output_enable & SCH56XX_WDOG_OUTPUT_ENABLE)
-		set_bit(WDOG_ACTIVE, &data->wddev.status);
+		set_bit(WDOG_HW_RUNNING, &data->wddev.status);

 	/* Since the watchdog uses a downcounter there is no register to read
 	   the BIOS set timeout from (if any was set at all) ->
--
2.30.2




[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux