Hi Armin, On 1/31/22 10:37, Armin Wolf wrote: > The hardware monitoring solutions supported by the sch5627 and > sch5636 drivers are Fujitsu-specific. > After some online searching, i found out that the solution used > with the SCH5627 is called "Antiope" by Fujitsu, just like the > "Theseus" solution inside the SCH5636. > I also found out that "Antiope" and "Theseus" are listed as > DMI onboard devices on supported Fujitsu devices, so the > sch56xx_common module can be loaded automatically an check > for the DMI devices. However some devices like the Esprimo C700 > have both devices, so after verifying that at least one onboard > device is present, sch56xx_common still has to detect which chip > is present. > This is safe however if at least one device is present. > > Tested on a Fujitsu Esprimo P720. > > Armin Wolf (4): > hwmon: (sch56xx) Autoload modules on platform device creation > hwmon: (sch56xx-common) Add automatic module loading on supported > devices > hwmon: (sch56xx-common) Replace msleep() with usleep_range() > hwmon: (sch56xx-common) Replace WDOG_ACTIVE with WDOG_HW_RUNNING Not sure why you did a resend? I received the original just fine ? With that said the entire series looks good to me: Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx> for the series. Regards, Hans > > drivers/hwmon/sch5627.c | 9 +++++++ > drivers/hwmon/sch5636.c | 9 +++++++ > drivers/hwmon/sch56xx-common.c | 44 ++++++++++++++++++++++++++++++---- > 3 files changed, 58 insertions(+), 4 deletions(-) > > -- > 2.30.2 >
